|
|
Joined: Jul 2006
Posts: 4,796
Campfire Tracker
|
OP
Campfire Tracker
Joined: Jul 2006
Posts: 4,796 |
Do they work well on basic steels like 1095 or 420, or is it like trying to sharpen a stick of butter on a cinder block? If so what grits for softer steels.....I'm thinking fine and or extra fine, but I have never used any of them. I normally use oil stones but want a small portable sharpener that need no oil or water.
"Men must be governed by God or they will be ruled by tyrants". --- William Penn
|
|
|
|
Joined: Feb 2001
Posts: 5,219
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2001
Posts: 5,219 |
The hone is a cutting tool and the aggressiveness of the cut is relative to the grit. Problem with cutting really soft steels is the hone may load up, especially if one uses too much force - heck, too much force is bad regardless of the steel. I can't imagine a properly heat treated 1095 will be a problem and good 420 should also be fine. Only way to really know is to try one.
I would pick the fine for field use where I prefer a more toothy edge but that's just me and others will disagree.
|
|
|
|
Joined: Sep 2014
Posts: 1,902
Campfire Regular
|
Campfire Regular
Joined: Sep 2014
Posts: 1,902 |
The DMT will work fine on those steels. For a field sharpener, I would get a diafold double sided model. Either course/fine or fine/extra fine.
|
|
|
|
Joined: Nov 2003
Posts: 2,688
Campfire Regular
|
Campfire Regular
Joined: Nov 2003
Posts: 2,688 |
Yes, it will work "fine", but a Norton Crystolon medium/fine will kick its azz all week and twice on Sunday...
You can no more tell someone how to do something you've never done, than you can come back from somewhere you've never been...
|
|
|
|
87 members (300_savage, 44automag, 10gaugemag, 5sdad, 406_SBC, 444Matt, 14 invisible),
2,264
guests, and
799
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,173
Posts18,465,386
Members73,925
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|