Home Forums Hunting & Shooting The Lefty Forum Photos- LH Customs

7mm STW
Mrc action and barrel
26" 9.5 twist number
4 contour with recessed crown
mcmillan edge stock

Figured I would add a little to this

788 in 308 win with custom McMillian stock. The second is a a rem 700 in 300 RUM with HS Precision stock

Was not really sure how to post pictures...sorry for the odd way

Come on man, shape up.grin

Here you go..........

http://www.24hourcampfire.com/ubbthreads/ubbthreads.php/topics/696239/1/How_to_post_your_photos

Here's one I put together for a left handed son.
A stainless Ruger Mark II rebarreled to 35 Whelen in a factory stock. The stainless leftys were never offered in walnut.
After these pics were taken we beadblasted the shine off of it and he installed a 2.5-8 Leupy in matte low rings.

Nice! I love the look of stainless in walnut.

Beautiful rifles gents have to dig up some photos now!

Regards,

Mog

While not a full custom, here's a Stainless LH Model 70 I recently acquired and did some customizing to. I think it turned out pretty nice.

Work I did to it:

New custom Mauser-style bolt handle buildup and bolt release lever(by Mark Penrod)

Cut and re-crown barrel to 24", and whole barreled action bead-blasted to look factory fresh(by "Redneck")

PT&G steel bottom metal Cerakoted "Satin mag" to match stainless steel(by Eddie Fosnaugh). Still need to have Eddie Cerakote the Talley mounts in graphite black.

McMillan Win 70 FWT pattern in Black w/Gray speckletone paint

Glass bedding/floated barrel(did myself)

Cal: 7mm Rem Mag

Sorry for the crappy cell-phone pics.













Should be good medicine for Mulies/Elk on cross-canyon shots with handloaded 160gr Accubonds or 140gr T-TSX at 3,000 and 3,100 fps respectively.

Leftybolt

Very nice fellas. Be proud to own those.

A picture of my 308 Rem 788 with McMillian Gamescout stock



My rem 700 in 300 RUM with HS Precision Stock






The 300 in action before cerecoated

My 450 Marlin 1895M with MPI stock and black Cerecoat

I think i figued out picture posting...wooo

Life/work have been nuts, but Fall is almost here! Finally got it scoped- FXII 6x36 LRD. I still haven't shot the poor thing. Hopefully soon...



Load development will start with H1000 and the Hornady 105 HPBT.

Here is a nice piece I bought off one of the Campfire faithful. Beautiful 6.5 Creedmoor built on a Remington 700 short action. Elk

That rockchucker's old gun?

If so, it's a beauty!

Yes it is, shoots as good as it looks!!!

9.3x62 on a Zastava, Lothar Walther barrel, NEGC sights and McMillan stock

Nice !

You have impeccable taste in firearms, utah708.

That is also a aftermarket bolt handle and three position safety?

Good eyes--it is a Gentry 3 position and aftermarket handle.

Put this KS clone .280 Ackley together last year. Shilen 25" Rem sporter contour barrel, fluted bolt, KS custom shop stock, tuned factory trigger, cerakoted graphite black. I bedded the stock and the Talley bases and my buddy lapped the rings. With Bushnell 4200 3-9 it weighs 7.8 lbs. Haven't done any load development yet, first load tried is the 120 gr TTSX at 3200 fps. Groups run about 3/4" vertical with almost no horizontal dispersion, may be my bench technique.

Stainless 700 RUM action, HS Precision stock, take off 25.5" Rock Creek #4 barrel chambered by GAP in 8mm Rem Mag. 9 pounds scoped. Stock and scope base bedded by me. Shoots 200 gr Partitions at 3150 fps under an inch. Last 3 shot 100 yd group went 0.48". The mud on the stock is from Alberta, where I killed 3 bears on two hunts including a gorgeous blonde/white 6 footer. I leave the mud on there to remind me of two awesome hunts. I also killed the 144" 9 pt in my avatar with this rifle.