Home Forums Reloading Shotshells 7/8oz 12 ga load TiteWad

I came across some 12SO clone wads, by Claybuster, and was planning on loading them for 7/8oz 12ga light loads for skeet and trap.

Got STS hulls and CCI 209's and TiteWad, but can't seem to find any recipes for that combo, which should use WAA12L wads.

Any recommendations? or should I look at different recipes and components?

Thanks a lot

If you'll go to Hodgdonreloading.com to verify, and fill in those components, you'll find at least two 7/8oz loads with that wad listed. First load they list with your listed components was 17.0 grns at 9400psi and 1250fps.

I found them. Thanks for the input. I got concerned as I read that the 12SO were for straight hulls and the STS and AA are tapered.