|
Joined: Oct 2011
Posts: 90
Campfire Greenhorn
|
OP
Campfire Greenhorn
Joined: Oct 2011
Posts: 90 |
Can only find loads for jacketed bullets in 100 gr. need load for 100 gr.in lead for Tightgroup in 32Mag Anybody know how much difference the starting load and Max Thanks for the help OZZIE
|
|
|
|
Joined: Aug 2011
Posts: 6,517
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2011
Posts: 6,517 |
I would use the same starting load with lead as is listed for jacketed, and work up. You will probably find that it takes less powder with lead to attain the same velocity as the jacketed bullets. Are you shooting cast or the softer swaged bullets. The softer bullets will give some leading in your barrel and throats if pushed too fast. With a good cast bullet, if sized right for your revolver throats, you should be able to safely attain jacketed velocities or a little more. Just be safe and don't try to make your 32 mag into a 357.
Last edited by lastround; 09/09/15.
If we live long enough, we all have regrets. But the ones that nag at us the most are the ones in which we know we had a choice.
Doug
|
|
|
|
Joined: Nov 2005
Posts: 22,985
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 22,985 |
Yep. (Except the bit about soft pistol bullets leading if pushed too fast. It's all about fit. In fact some of the worst leading I ever dealt with in revolvers and 1911's was with sinfully hard bullets- bullets that fit like crap.)
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Aug 2011
Posts: 6,517
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2011
Posts: 6,517 |
Yep. (Except the bit about soft pistol bullets leading if pushed too fast. It's all about fit. In fact some of the worst leading I ever dealt with in revolvers and 1911's was with sinfully hard bullets- bullets that fit like crap.) What you say about sizing is very true, hence my statement about being sized to fit your revolver throats. My experience with soft lead swaged bullets, which are rarely sized correctly (for my revolvers anyway) and trying to push them too fast does cause a leading problem in my guns. I quit using them years ago and shoot nothing but cast most of the time. Usually cast with a BHN of 11 to 12, and sized to fit the throats of my revolvers.
If we live long enough, we all have regrets. But the ones that nag at us the most are the ones in which we know we had a choice.
Doug
|
|
|
|
Joined: Dec 2000
Posts: 10,351
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2000
Posts: 10,351 |
the general rule is.
when using cast lead bullets, use the same load data that the jacketed bullets of equal weight use.
Whatever you are willing to put up with, is exactly what you will have.
When your ship comes in. ... make sure you are willing to unload it.
PAYPAL, sucks and I will never use them again. I recommend you do the same.
|
|
|
691 members (11point, 10gaugemag, 17CalFan, 160user, 117LBS, 12344mag, 78 invisible),
2,672
guests, and
1,313
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,187,689
Posts18,399,819
Members73,820
|
Most Online11,491 Jul 7th, 2023
|
|
|
|