|
|
Joined: Jun 2010
Posts: 1,913
Campfire Regular
|
OP
Campfire Regular
Joined: Jun 2010
Posts: 1,913 |
After February inner-ear surgery, I'm now ready to start shooting again. Jon Beanland built me a 6.5 SAUM that I took delivery of and I'm getting my dies ordered. It's built with a .298 reamer. I'll be using Remington 7mm SAUM brass. Is this all I need?
Redding Type S Match Bushing 2-Die Set 7mm Remington Short Action Ultra Magnum (RSAUM) Redding #: 36280
Redding Neck Sizer Die Bushing 294 Diameter
Redding Carbide Size Button Kit 6.5mm
Teach every child you meet the importance of forgiveness. It's our only hope of surviving their wrath once they realize just how badly we've screwed things up for them.
|
|
|
|
Joined: Jun 2004
Posts: 44,805
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,805 |
Do you already know the typical wall thickness of the brass?
|
|
|
|
Joined: May 2007
Posts: 1,082
Campfire Regular
|
Campfire Regular
Joined: May 2007
Posts: 1,082 |
|
|
|
|
Joined: Jun 2010
Posts: 1,913
Campfire Regular
|
OP
Campfire Regular
Joined: Jun 2010
Posts: 1,913 |
Do you already know the typical wall thickness of the brass? I don't have a neck wall thickness guage/micrometer.
Teach every child you meet the importance of forgiveness. It's our only hope of surviving their wrath once they realize just how badly we've screwed things up for them.
|
|
|
|
Joined: Jun 2004
Posts: 44,805
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,805 |
Thinking out loud:
.294" sized diameter for .296" loaded diameter
.296" - .264" = .032" of brass
.032"/2 = .016" wall thickness
That would be on the thick side for my cartridges, but I don't load the one you're considering. SAUM brass may run thicker than what I'm used to.
|
|
|
|
Joined: Aug 2008
Posts: 2,259
Campfire Regular
|
Campfire Regular
Joined: Aug 2008
Posts: 2,259 |
Several folks who went with the no-turn option have reported online that they end up turning anyway. I turned some 7SAUM brass last night and it started out quite a good bit thicker than .0145 I wanted post-turning. I may still have some left that is not turned yet and can measure.
RLTW
|
|
|
|
Joined: Oct 2010
Posts: 1,103
Campfire Regular
|
Campfire Regular
Joined: Oct 2010
Posts: 1,103 |
I opted to turn with my .298 neck 6.5 SAUM.
My Norma brass (7Saum) was .016 to .018 before turning
|
|
|
|
Joined: Aug 2008
Posts: 2,259
Campfire Regular
|
Campfire Regular
Joined: Aug 2008
Posts: 2,259 |
Measured some Remmy 7mm and it was 0.018-0.020 at thickest.
RLTW
|
|
|
|
550 members (1minute, 19rabbit52, 12344mag, 10gaugeman, 1eyedmule, 222Sako, 54 invisible),
2,802
guests, and
1,224
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,710
Posts18,456,877
Members73,909
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|