Home Forums Hunting & Shooting Hunting Optics Burris XTR Signature Rings

Print Thread

Hop To

Burris XTR Signature Rings #11199543 05/21/16
Joined: Oct 2005 Posts: 1,566 Wyoming xphunter OP Campfire Regular
OP xphunter Campfire Regular Joined: Oct 2005 Posts: 1,566 Wyoming	Got some in today after a long wait (For both 30mm and 34mm scope tubes). Anyone else use these yet? They are like the signature Zee rings, but better with the ability to add or take away 5 to 40 MOA. I'm a happy camper! Comes in a cool Plano (Pelican like) box That is a +20 and a-20 insert--Sorry for the fuzzy pic. Ernie "The Un-Tactical" http://sebrests-usa.com/

GB1

Re: Burris XTR Signature Rings xphunter #11199559 05/21/16
Joined: Jun 2004 Posts: 44,790 M mathman Campfire 'Bwana
mathman Campfire 'Bwana M Joined: Jun 2004 Posts: 44,790	What ring spacing do they assume?

Re: Burris XTR Signature Rings xphunter #11199570 05/21/16
Joined: Oct 2005 Posts: 1,566 Wyoming xphunter OP Campfire Regular
OP xphunter Campfire Regular Joined: Oct 2005 Posts: 1,566 Wyoming	Assuming your rings must be exactly 4.75 inches apart at the center of the ring. They actually give the offsets for other measurements. http://www.burrisoptics.com/sites/d...wnloads/xtrsignatureringsinstruction.pdf Ernie "The Un-Tactical" http://sebrests-usa.com/

Re: Burris XTR Signature Rings xphunter #11200112 05/22/16
Joined: May 2003 Posts: 5,792 The Big Country H Hondo64d Campfire Tracker
Hondo64d Campfire Tracker H Joined: May 2003 Posts: 5,792 The Big Country	I really like the concept of these and would give them a try but for the height. They just don't make them as low as I would like. John If my people, who are called by my name, will humble themselves and pray and seek my face and turn from their wicked ways, then I will hear from heaven, and I will forgive their sin and will heal their land. 2 Chronicles 7:14

Re: Burris XTR Signature Rings xphunter #11200134 05/22/16
Joined: Mar 2005 Posts: 17,527 Colorado D dogcatcher223 Campfire Ranger
dogcatcher223 Campfire Ranger D Joined: Mar 2005 Posts: 17,527 Colorado	Not a fan of dual clamps...seems easy to get them out of alignment.

IC B2

Re: Burris XTR Signature Rings dogcatcher223 #11200457 05/22/16
Joined: Oct 2005 Posts: 1,566 Wyoming xphunter OP Campfire Regular
OP xphunter Campfire Regular Joined: Oct 2005 Posts: 1,566 Wyoming	Originally Posted by dogcatcher223 Not a fan of dual clamps...seems easy to get them out of alignment. What kind of problems have you had with the Burris design? Ernie "The Un-Tactical" http://sebrests-usa.com/

Re: Burris XTR Signature Rings xphunter #11200502 05/22/16
Joined: Mar 2005 Posts: 17,527 Colorado D dogcatcher223 Campfire Ranger
dogcatcher223 Campfire Ranger D Joined: Mar 2005 Posts: 17,527 Colorado	I don't use windage adjustable rings, so I havent had any problems. It doesn't look like those inserts pivot like the original signature design that are round on the bottom?

Re: Burris XTR Signature Rings dogcatcher223 #11200592 05/22/16
Joined: Oct 2005 Posts: 1,566 Wyoming xphunter OP Campfire Regular
OP xphunter Campfire Regular Joined: Oct 2005 Posts: 1,566 Wyoming	Originally Posted by dogcatcher223 I don't use windage adjustable rings, so I havent had any problems. It doesn't look like those inserts pivot like the original signature design that are round on the bottom? Yes, they do pivot. Ernie "The Un-Tactical" http://sebrests-usa.com/

Re: Burris XTR Signature Rings xphunter #11207461 05/25/16
Joined: Dec 2002 Posts: 13,077 Kodiak & AZ D dennisinaz Campfire Outfitter
dennisinaz Campfire Outfitter D Joined: Dec 2002 Posts: 13,077 Kodiak & AZ	Originally Posted by xphunter Originally Posted by dogcatcher223 I don't use windage adjustable rings, so I havent had any problems. It doesn't look like those inserts pivot like the original signature design that are round on the bottom? Yes, they do pivot. How can they? the original inserts are hemispherical and can rotate at will. These look basically flat on top!! NRA Benefactor Member Those who live by the sword get shot by those who don't.

Re: Burris XTR Signature Rings xphunter #11208676 05/26/16
Joined: Mar 2005 Posts: 17,527 Colorado D dogcatcher223 Campfire Ranger
dogcatcher223 Campfire Ranger D Joined: Mar 2005 Posts: 17,527 Colorado	I agree, not sure how a flat insert can pivot. The originals basically acted like a ball joint.

IC B3

Re: Burris XTR Signature Rings xphunter #11211254 05/27/16
Joined: Oct 2005 Posts: 1,566 Wyoming xphunter OP Campfire Regular
OP xphunter Campfire Regular Joined: Oct 2005 Posts: 1,566 Wyoming	New design. They can pivot up to 5 degrees. The old Signature ZEE's can go over 35 degrees. FWIW if you wanted to add like 50 MOA it is less than 2 degrees. Ernie "The Un-Tactical" http://sebrests-usa.com/

Re: Burris XTR Signature Rings xphunter #11211279 05/27/16
Joined: Nov 2003 Posts: 28,814 Grants Pass,OR Ringman Campfire Ranger
Ringman Campfire Ranger Joined: Nov 2003 Posts: 28,814 Grants Pass,OR	What do they weigh? "Only Christ is the fullness of God's revelation." Everyday Hunter

Re: Burris XTR Signature Rings xphunter #11211605 05/27/16
Joined: Oct 2005 Posts: 1,566 Wyoming xphunter OP Campfire Regular
OP xphunter Campfire Regular Joined: Oct 2005 Posts: 1,566 Wyoming	The 30mm 1.25" height weigh 7.0 ounces on my scale Ernie "The Un-Tactical" http://sebrests-usa.com/

Moderated by RickBin

Link Copied to Clipboard

YB23

158 members (24HourCampFireGuy50, 10gaugemag, 260madman, 338reddog, 31 invisible), 1,220 guests, and 1,005 robots.

Key: Admin, Global Mod, Mod

April
S	M	T	W	T	F	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Forum Statistics

Forums81

Topics1,190,219

Posts18,447,467

Members73,899

Most Online11,491
Jul 7th, 2023

Responsive Width:

PHP: 7.3.33 Page Time: 0.059s Queries: 14 (0.003s) Memory: 0.8485 MB (Peak: 0.9482 MB) Data Comp: Zlib Server Time: 2024-04-16 06:06:34 UTC
Valid HTML 5 and Valid CSS