|
Joined: May 2004
Posts: 779
Campfire Regular
|
OP
Campfire Regular
Joined: May 2004
Posts: 779 |
I plan on refinishing an older Savage maple (I think) stock. What stain should I use? This is my first refinishing job so all suggestions are welcome!
Only a fool would sell an accurate .30-06
|
|
|
|
Joined: Jul 2008
Posts: 6,555
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2008
Posts: 6,555 |
It's probably beech, not maple. Stain gets a little blotchy on birch and beech sometimes, so use one that has the color and the hard coat all in one, like Minwax. Pick the color you want and follow the directions, simple. buy some 600g wet-sand paper for between coats.
"...One Nation under God, indivisible, with Liberty and Justice for All"
JeffG
|
|
|
|
Joined: Nov 2005
Posts: 22,985
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 22,985 |
If you use that stuff (and personally i hate it), be sure to stir it constantly- like every time you dip the brush. Otherwise it'll separate out and you'll get a blotchy finish anyway. No need to go 600x between coats. 320x is plenty fine and provides more "tooth" for the successive coat.
Probably a better idea is to use Minwax wood conditioner on the bare wood first. It'll help even out the finish on that birchwood stock no matter what finish you use. The best thing though is not to mess with it if you haven't started it yet. Birch is the crappiest stuff to work with and almost guaranteed to frustrate the amateur.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Feb 2009
Posts: 6,264
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2009
Posts: 6,264 |
I like laurel Mountain Forge stains
"For some unfortunates, poisoned by city sidewalks ... the horn of the hunter never winds at all" Robert Ruark, The Horn of the Hunter
|
|
|
|
Joined: Dec 2002
Posts: 32,029
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2002
Posts: 32,029 |
|
|
|
|
Joined: Sep 2007
Posts: 26,524
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2007
Posts: 26,524 |
last birch stock I did, I used wood conditioner and a green tinted water based stain, multiple coats, followed by beeswax finish.
For my daughter's mini mauser.
Turned out good. Blends in with the cedar tree she sets in.
|
|
|
|
Joined: Nov 2013
Posts: 28,512
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2013
Posts: 28,512 |
Can't help with the color issue, but the Minwax matte spar poly I used on my almost finish-less pre64, has held up very well for 10 years, at least. I thinned the first few coats (although some here have said that doesn't do anything) to help it penetrate and so as not to gunk up the checkering. Looks good and fixed the annoying POI changes I had to deal with annually.
What fresh Hell is this?
|
|
|
|
Joined: Nov 2005
Posts: 22,985
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 22,985 |
I'm using the Minwax spar poly for more and more stuff. I prefer the gloss rather than matte- better UV protection. You can rub out the final coat of gloss and achieve a dull finish, then wax it to bring up a pleasing luster. I don't thin it until the last coat or two. Thinning the final coats allows it lay flatter, the previous 8 or 9 coats provide the build necessary for a finish with "depth".
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Nov 2013
Posts: 129
Campfire Member
|
Campfire Member
Joined: Nov 2013
Posts: 129 |
|
|
|
103 members (338reddog, 405joe, 7mm_Loco, 10gaugemag, 444Matt, 12 invisible),
1,389
guests, and
665
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,187,588
Posts18,397,868
Members73,815
|
Most Online11,491 Jul 7th, 2023
|
|
|
|