|
Joined: Jan 2005
Posts: 6,186
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2005
Posts: 6,186 |
Have a cocking piece indicator, ser 316493. Also some other reciever pieces.
|
|
|
|
Joined: May 2006
Posts: 1,367
Campfire Regular
|
Campfire Regular
Joined: May 2006
Posts: 1,367 |
I need a rotor for an 1899 Take-down 22 High Power. Anyone have one avail - or maybe a lead to one? Also need the take-down latch for this rifle. Pls PM or Email at dcw402 Earthlink.net Thx Don
|
|
|
|
Joined: Apr 2011
Posts: 5,165
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2011
Posts: 5,165 |
Welcome to the site Don. I'm not real up on the inards of the 99's, so I'm not sure if there is any difference or if they are the same. The serial will help, just X out the last two digits. If it's an 1899 take down in 22 HP it's a model H, introduced in 1912 and discontinued in 1919. If it's a 99 take down it's a model F. Some one with real knowledge will be along shortly, Joe.
I'm not greedy, I just want one of each.
Remember Ira Hayes
JoeMartin
|
|
|
|
Joined: Apr 2011
Posts: 5,165
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2011
Posts: 5,165 |
Oops, I see you are a long time member, so welcome to the Savage side, Joe.
I'm not greedy, I just want one of each.
Remember Ira Hayes
JoeMartin
|
|
|
|
Joined: Oct 2009
Posts: 7,680
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2009
Posts: 7,680 |
I need a rotor for an 1899 Take-down 22 High Power. Anyone have one avail - or maybe a lead to one? Also need the take-down latch for this rifle. Pls PM or Email at dcw402 Earthlink.net Thx Don I have both but taking wife to Doc then loading trailor for Gun show, will E mail later. norm
There is not enough darkness in all the world to put out the light of even one small candle----Robert Alden . If it wern't entertaining, I wouldn't keep coming back.------the BigSky
|
|
|
|
Joined: Feb 2003
Posts: 14,324
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2003
Posts: 14,324 |
Anyone got a sporting rear sight for a Stevens 425? Looks almost like a 99 rear sight only it has a 9/32 dovetail. A regular 3/8 dovetail won't fit it. http://media.liveauctiongroup.net/i/18877/18253570_3.jpg?v=8D0C39045F91A60
Last edited by mad_dog; 04/11/16.
24 hour sarcastic S.O.B.
|
|
|
|
Joined: Nov 2005
Posts: 23,059
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,059 |
Get out the files, Joe! 3/32 " can be made to go away right quick!
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Feb 2003
Posts: 14,324
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2003
Posts: 14,324 |
24 hour sarcastic S.O.B.
|
|
|
|
Joined: Apr 2016
Posts: 98
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Apr 2016
Posts: 98 |
Does anyone have, or know where I can find, the proper front sight blade for my 1917 Perchbelly Take Down?
|
|
|
|
Joined: Oct 2009
Posts: 7,680
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2009
Posts: 7,680 |
what caliber ? i have a couple,was it a tiney screw or a pin tha held it in ? screw ones could be adjusted a little.
norm
Last edited by norm99; 04/20/16.
There is not enough darkness in all the world to put out the light of even one small candle----Robert Alden . If it wern't entertaining, I wouldn't keep coming back.------the BigSky
|
|
|
|
Joined: Apr 2016
Posts: 98
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Apr 2016
Posts: 98 |
It's 250-3000. So far what I've seen mentioned was a silver blade? Still have to get that awsome book listed on the forum but figured you fellows would know what I needed. What I have now is a steel blade. I"ll have to get a pic. I"m guessing home made maybe but it was a nice job.
|
|
|
|
Joined: Apr 2016
Posts: 98
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Apr 2016
Posts: 98 |
It's 250-3000. So far what I've seen mentioned was a silver blade? Still have to get that awsome book listed on the forum but figured you fellows would know what I needed. What I have now is a steel blade. I"ll have to get a pic. I"m guessing home made maybe but it was a nice job. Anyway its a tiny screw holding it in.
|
|
|
|
Joined: Oct 2009
Posts: 7,680
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2009
Posts: 7,680 |
It's 250-3000. So far what I've seen mentioned was a silver blade? Still have to get that awsome book listed on the forum but figured you fellows would know what I needed. What I have now is a steel blade. I"ll have to get a pic. I"m guessing home made maybe but it was a nice job. Anyway its a tiny screw holding it in. well not all of them were silver i have 4 copper, 1 is all copper 3 copper beads of various sizes. 3 silver 2 steel or nickle , 1 without a bead 1 with a bead missing 1 gold full bar bead plus 3-4 guns buried to deep to check so unless you are really set on silver i would not sweat it and if you are then you have to match the hight . norm
There is not enough darkness in all the world to put out the light of even one small candle----Robert Alden . If it wern't entertaining, I wouldn't keep coming back.------the BigSky
|
|
|
|
Joined: Feb 2008
Posts: 240
Campfire Member
|
Campfire Member
Joined: Feb 2008
Posts: 240 |
Uggggh ,,,,Bought a 1899c serial 12.6xx straight stock half octagon/half round barrel lever was a tad loose tried the lever bite in misc info thread ....now it wont close all the way ....with just the lever in it wont close...just below the round pin.button that slides in the bolt ...it hits a ramp and wont go any further ......anyway the handle cracked while hitting the lever "to close the arc ........Anyone have one to sell ....thanks ...
Last edited by kdog; 06/27/16.
|
|
|
|
Joined: Dec 2006
Posts: 4,338
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2006
Posts: 4,338 |
I'm looking for the front part of a 1" Stith mount for a 99 (including scope tube, dovetail block, etc). Anybody have one they'll sell?
***************************************** Hunting FOR Savages, Hunting WITH Savages
|
|
|
|
Joined: Oct 2009
Posts: 7,680
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2009
Posts: 7,680 |
Uggggh ,,,,Bought a 1899c serial 12.6xx straight stock half octagon/half round barrel lever was a tad loose tried the lever bite in misc info thread ....now it wont close all the way ....with just the lever in it wont close...just below the round pin.button that slides in the bolt ...it hits a ramp and wont go any further ......anyway the handle cracked while hitting the lever "to close the arc ........Anyone have one to sell ....thanks ... yes i have one i will PM you look for a flashing envelope on the forum bar.
There is not enough darkness in all the world to put out the light of even one small candle----Robert Alden . If it wern't entertaining, I wouldn't keep coming back.------the BigSky
|
|
|
|
Joined: May 2011
Posts: 56,249
Campfire Kahuna
|
Campfire Kahuna
Joined: May 2011
Posts: 56,249 |
I need a pair of sling studs w/loops for a 99 DL. Can trade something cool if anyone is sitting on them.
_______________________________________________________ An 8 dollar driveway boy living in a T-111 shack
LOL
|
|
|
|
Joined: Feb 2010
Posts: 1,480
Campfire Regular
|
Campfire Regular
Joined: Feb 2010
Posts: 1,480 |
still looking for ctg. lifter for mod 170 pump cal. 30/30 same as lifter for 410 shotgun
there is no man more free than he who has nothing left to lose --unknown-- " If it bleeds we can kill it" Conan The Barbarian
|
|
|
|
Joined: Dec 2010
Posts: 126
Campfire Member
|
Campfire Member
Joined: Dec 2010
Posts: 126 |
Just need an original front sight for a 99 from just after the war. 300 Savage. The one that came with it is too tall and just looks weird.
If liberals knew what they were missing, they�d give up drugs, sex and rock-n-roll for shooting and hunting. But then the rest of us would never draw an elk tag, so to hell with 'em! � James "Mitch" Vilos aka (Pancho Vilos)
|
|
|
|
Joined: Mar 2002
Posts: 12,706
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2002
Posts: 12,706 |
What's the model and SN range?
|
|
|
|
324 members (06hunter59, 1lesfox, 160user, 01Foreman400, 1beaver_shooter, 12344mag, 30 invisible),
1,882
guests, and
967
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,601
Posts18,454,644
Members73,908
|
Most Online11,491 Jul 7th, 2023
|
|
|
|