Home Forums Hunting & Shooting Custom Rifles & Wildcats RIFLE BLUEPRINTS ONLY!

I was thinking the same thing about your purple classic shown above. You sure know how to pick 'em.

Texas Hawg Whacker

9,3x62mm
CZ550 20.5" barrel 1-9.5 twist
CZ supplied Iron sights
HCR Accurized into a McMillan CZ AHR stock
(50% Tan 25% Olive 25% Dark Gray) LOP 13.5 over 1" Decelerator
Burris Signature Select Safari 1.75-5x32mm LRS Fast Plex in Talley QD rings
All-up with five rounds of 286gr. NP: 8lbs 12.7oz

All-'rounder



.30-06 Springfield
Talley LW lows
Remington 700 SPS Stainless barreled action
Bansner High Tech Stock (painted and 1/2" Decelerator installed by RickBin)
Bolt fluted, deep Ti pattern, hunter knob installed, and aluminum oxide blast to bolt, action, barrel, and Talleys by Kampfeld Custom
IOR Bucharest 6x42 MP8 reticle
Uncle Mikes Mountain Sling, slung hasty twist.

Weighs 7.6 lbs., all up, with a belly full of 150s.

SS LH Winchester M70
Pac-Nor 3 groove, chambered in 30-06, fwt. contour
McMillan Edge stock
Williams Oberndorf bottom metal
Williams extractor
Talley Lwt. mounts
Leupy 6X42 scope

Dave Gentry 270 Wby with Blackburn bottom metal, 3-pos wing safety, 24" octagon barrel tapered to .60" @ crown, Brown Prec Classic stock on a Rem 700 action. DG's Featherlight rings and bases, Leup VXlll 4.5-14x scope. It's on its second barrel and the stock, its third paint job.

Shilen 340 Wby on a Rem 700; Blackburn bottom metal; 3-pos wing safety; Shilen prem barrel, 24" with fixed single leaf rear sight and hooded, post front puts 250-gr Nosler to POA at 100 yds; barrel band; all Black-T finish; Brown Prec Classic stock; Leup QR rings and bases with Leup 2.5-8 VXlll; 8.5 lbs.

Gdv

The last but no pic yet. Smoothed, tuned all steel stainless MRC barreled action 458 Lott; Williams bottom metal incl trigger guard; Black-T finish: NECG island, single leaf rear with hooded, fiber-optic beaded (3/32")post front; barrel band on 22" barrel; Talleys, QR r & 8x40 b's Micky Supreme stock.
Optics: Leup 2.5 Comp, HD reticle. Weight 9 7/8 lbs.

Gdv

Very Slick Rig

HBB

338 Win Mag - All Around Alaska Rifle

Trued 700
Sako Extractor
Holland Lug
Pacnor 3 groove barrel
Borden Rimrock stock
Timney Trigger - 2.25 lbs
Leupold 2.5 X 8
Leupold PRW rings
Warne Rail
Paint by Borden

Haven't shot yet - just finished.

Borden Timberline action
Hart #4 @25"
Holland lug
Rifle Basix trigger
Mcm Classic 13 5/8 pull
Factory bottom metal
119 oz w/o scope and rings

7mm WSM
Mod70 Classic trued/lapped
Williams bottom metal
McM HTG in GAP Camo
Broughton #5 - 1/9 5C @ 24.5
Talley LW mounts (High)
Swaro 4-12x50 w/TDS ret
Eagle Stock pack
TIS sling

Just a shade over 11 lbs as listed (sans bipod)

All smithing work was done by Patriot Arms. In hindsight, I would have gone with the adjustable comb HTG or a Manners MCS-T. The front ringmount had to be flipped to get proper eye relief (after this pic was taken) and the stockpack had to be used to get comfortable comb height. I may go to a scope with 40mm obj and try to go down a ringmount height. Still working up loads for 140s and 160s...she's a pussycat to shoot from a bench/rest.

Kampfeld Custom...
22-250AI
Totally trued up M700, KG'd in Titanium Gray.
Rifle Basix trigger.
Pac-Nor 12 twist, 3 groove, aluminum oxide bead blasted.
HS Stock.
Burris Signature rings, 5moa inserts.
Burris Xtreme bases.
Kampfeld knob, KG'd bolt/handle, bottom metal in matte black.
Sightron 4.5x14.

New guy is in love with this rig. Never make room in the safe by getting rid of this one. PM me if you do.

260 Remington
SS 700 BDL
Gaillard 23" 1:8 twist
Factory trigger
factory 700 LSS Mtn laminate w/ custom barrel channel
Leupold Dual Dovetail silver base w/ matte medium rings
Leupold VX-II 3-9x40mm matte

That pic is 18 months old, currently wears a FXIII 6x42 wide duplex matte, with an elevation turret, in Talley low mattes. Oh and I've swapped out the factory trigger for a new XMark Pro trigger

Tod,

Have really liked that rig since the first time I saw it. What's the barrel contour? Is the forend getting kinda thin towards the top of the barrel channel? How does it shoot?

John

All Weather Backpack Rifle Blueprint:






Rem 700 Titanium
30/06, 22" recrowned factory barrel
X Mark Pro Trigger
GreTan Alloy Shroud
GreTan Liteweight Firing pin
Alloy TG, ADL (Numrich Arms?)
Leupold FXII 6X36 LR reticle, matte
Leupold DDs, lows
KG GunKote on action, scope mounts & studs
McMillan Hunter's Edge, Olive, 1" Decelerator, SS studs, Marine Tex bedding
5lbs 14oz as pictured

Special thanks to Dick Davis of McMillan Fiberglass Stock Co.

MtnHtr

I'm thinking that'll hunt...! WOW!

Mtn Hunter
Along with your 350 Remington Mag, that rifle is one of my favorites on here.

CAS did RockCreek flute this #3 for you.

I am not worthy (I bow to the preceding rifles), but this is the most custom rifle I own:

Remington Custom Shop KS in .350 Rem Mag. Kampfeld bedded, free floated and recrowned. Cerokote, Hunter knob, Talley's. She weighs in at a shoulder thumping 6.5 lbs with a full belly. My kids call this daddy's swamp slammer.