|
Joined: Dec 2005
Posts: 260
Campfire Member
|
OP
Campfire Member
Joined: Dec 2005
Posts: 260 |
I was looking through the Midway catalog and saw that David Tubb has a firelapping kit for 22lr. I think it has progressively finer grit to polish the bore? This kit is about $30.
Is fire lapping advisable in a 22lr. I have a Marlin 39a microgrove barrel and will be getting a CZ452 American.
What do you fellows think????
Centex Bill
|
|
|
|
Joined: Apr 2004
Posts: 61,130
Campfire Kahuna
|
Campfire Kahuna
Joined: Apr 2004
Posts: 61,130 |
Just shoot it.
The 39A and the 452 are about as accurate as they will ever get, if you feed them what they like.
The lapping kit, will be a waste of money better spent on ammo.
|
|
|
|
Joined: May 2005
Posts: 261
Campfire Member
|
Campfire Member
Joined: May 2005
Posts: 261 |
It's just my opinion, but I think a rifle barrel should be lapped, only if there is a compelling reason to do it...!
Bill
|
|
|
|
Joined: Jun 2006
Posts: 4,773
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2006
Posts: 4,773 |
I ain't lapping no .22 rifle. I've got some precision target .22s, and I don't see any reason to mess with them.
Plus, in my experience, and I think in the experience in others, a .22 LR shoots better after 100 or so rounds, up to 500.
Every time I've cleaned a match rifle, I've lost accuracy for a while.
Not many problems you can't fix With a 1911 and a 30-06
|
|
|
|
Joined: Jun 2007
Posts: 21,944
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2007
Posts: 21,944 |
Yes, firelapping works but you can damage any gun by not doing it right! It's advised that you do not lap the bore larger in the grooves than your bullet diameter. This means you must have the proper tools and ability to slug your barrel end to end.
I would just shoot it!
|
|
|
|
Joined: Aug 2005
Posts: 754
Campfire Regular
|
Campfire Regular
Joined: Aug 2005
Posts: 754 |
The concept seems questionable for a quality .22 LR barrel that already shoots.
I'd pass.
"You cannot miss fast enough to win."-- Ross Seyfried
|
|
|
|
Joined: Jan 2001
Posts: 29,778
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 29,778 |
A large proportion of the accuracy issues with 22 lr's involves finding one or two brands of ammo that work well. One my do no better than hitting baseballs at 50 yds with one brand and be driving tacks with another. Spring for a box of every brand one can find and go shoot some paper. Give the rejects to someone who doesn't care.
I would not dink with a barrel until one has looked at ammo and/or a potential headspace issue. 1Minute
1Minute
|
|
|
|
Joined: Dec 2002
Posts: 32,109
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2002
Posts: 32,109 |
+1!
Even if Dave Tubbs sells this kit, I can't imagine ever fire lapping any barrel. If a factory rimfire barrel is so rough that it needs to be lapped, it probably needs to be replaced.
Whenever someone brings me a .22 LR rifle that won't shoot, I check the base and ring screws. Then I run a patch with Hoppe's #9 through the bore, if for no other reason than to establish a baseline performance level. Then I shoot a variety of ammo, usually starting with RWS Target Rifle or Rifle Match. On Ruger 10/22s, I always check to make sure that the barrel attachment is tight.
Jeff
|
|
|
|
Joined: Jul 2004
Posts: 13,436
Campfire Outfitter
|
Campfire Outfitter
Joined: Jul 2004
Posts: 13,436 |
For barrels that aren't lapped by the maker, hand lapping works. I'd never consider fire lapping however.
Don Buckbee
JPFO NRA Benefactor Member NSSA Life Member
|
|
|
|
Joined: Jun 2004
Posts: 16,740
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2004
Posts: 16,740 |
I have never heard of fire lapping a small bore. Would this work on an older rifle?
A government is the most dangerous threat to man�s rights: it holds a legal monopoly on the use of physical force against legally disarmed victims.
|
|
|
|
Joined: Jan 2005
Posts: 57,474
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 57,474 |
Fire lapping works on centerfire guns. Never did it on rimfires though, would not see that after trying all different kinds of ammo, it would not hurt to try.
Much like CF barrels, if load testing doesn't work, lap it, instead of a new tube. If that works, it was cheap, if not its time for 500 bucks...
We can keep Larry Root and all his idiotic blabber and user names on here, but we can't get Ralph back..... Whiskey Tango Foxtrot, over....
|
|
|
|
Joined: Dec 2005
Posts: 422
Campfire Member
|
Campfire Member
Joined: Dec 2005
Posts: 422 |
In the case of abrasives in the barrel, a little goes a long way. I got a new Ruger MKIII 512 that didn�t shoot that well. I suspected a little residual roughness from the manufacturing process. I hand lapped it with JB Bore Bright. Six passes with the stuff. Not much, but enough to take out the roughness. It shoots much better now.
I have some experience with this. I have ruined a couple of barrels in the past by over-enthusiastic use of abrasives.
|
|
|
|
Joined: Aug 2003
Posts: 17,491
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2003
Posts: 17,491 |
Fire-lapping 22s? I thought this was something every kid did (unknowingly). It seems to me that most of us who started out hunting with 22s probably carried a supply of ammo in our pockets. I can't speak for all, but I suspect most pockets have enough grit to qualify for lapping compound. (Why else would Remington's Golden Bullet have been marketed like it has been?) I attribute those "pocket lapping shells" for the fact that I could shoot so much better with irons as a youngester than I do now. That's my story and I'm sticking to it.
Sometimes, the air you 'let in'matters less than the air you 'let out'.
|
|
|
|
Joined: Nov 2006
Posts: 4,570
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2006
Posts: 4,570 |
Firelapping a .22LR?
I've never done it, but the Dave Tubb "kit" only has enough cartridges to do 2 or 3 barrels.
Most .22's don't need the treatment, but just because a .22 might benefit from the process doesn't mean the barrel is bad or beyond saving.
The idea is to shoot no more than 10 or a dozen cartridges of differing grits trough said barrel. About 2 or 3 or 4 differing grits (like emory cloth or finer).
Was it me, I'd try shooting 2 or 3 cartridges of each grit through the barrel, running a moistened patch through it after each shot.
I dang sure wouldn't go hog-wild with 'em.
I agree shooting a couple bricks of ammo through the gun will do more than anything to clean up and smooth a bore. I also agree nearly every gun has a preference for one or two favorite flavors of ammo, and not necessarily the most expensive.
I've met countless shooters who had more good luck with 'Wally World' Federal bulk ammo, than any other .22LR brand or load!
Plus I know a fellow who owned a .17HMR NEF Sportster who needed to shoot (nearly) two bricks of ammo before the barrel settled down and broke in! A very tedious and "expensive" process, but he was happy afterward.
All of Tubb's 'kits' or bullets are designed to be fired at low (subsonic-like) velocities, usually no more than 5rds of each grit - if not less.
Brownell's sells both.
|
|
|
|
Joined: Jan 2005
Posts: 10,718
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2005
Posts: 10,718 |
I'll keep it short, but the only experience I have with firelapping a .22lr involved using Verl Smith's (LBT) abrasive compound on my 10/22. According to instructions, I was supposed to put "a dollop" of compount on the tip of the bullet, then chamber and fire. I kept this up while cleaning and shooting for group. The group never improved and I realized that I had fired more rounds than I originally had planned. I took a peek down the bore and found about have of the rifling profile was GONE. Fortunately I'll never shoot out the rest of the bore with .22lr, but I still feel stupid every time I remember that dumb little adventure I took.
I've also firelapped centerfire revolvers and I feel that it does work quite well. I'd never try it on a .22lr again though.
To the original poster, PLEASE don't screw up nice little 39A.
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery. --Winston Churchill
|
|
|
|
Joined: Feb 2001
Posts: 8,528
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2001
Posts: 8,528 |
My thoughts are, the Micro-Groove rifleing could "go away" real quickly....I WOULD NOT do it to the Marlin. Virgil B.
|
|
|
|
Joined: Jan 2006
Posts: 1,739
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 1,739 |
...The whole process spooks me a bit. I'd have more confidence in conventionaly lapping the barrel if I thought it was in need to a better polished bore surface. "JB" compound on a bore mop, with plenty of elbow grease mixed in, swabing the bore would smooth it up a bit without washing out the rifling. ...If a slightly more agressive polishing grit was needed, "Pearl Drops" toothpaste would do, worked the same way.
|
|
|
|
Joined: Jan 2005
Posts: 10,718
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2005
Posts: 10,718 |
I've never seen a 39 Marlin that didn't shoot the lights out. If one didn't, I'd start with a good barrel cleaning and then dive into as many brands of ammo I could find samples for. I'd rather live with the best results I found from the samples than EVER firelap or even JB the bore. I've JB'd a lot of centerfires, but I think the risk is a bit high in a 39, even with the receiver apart.
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery. --Winston Churchill
|
|
|
|
Joined: Nov 2006
Posts: 4,570
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2006
Posts: 4,570 |
One really easy way to firelap might be to get some Aguila SSS 60grn "sniper" 22's and use them [sparingly] with a drop of some JB bore paste or similar on the top of the bullet, but like was mentioned above - with only a few rounds!
The 60grn Aguila's are advertised to have @950fps muzzle velocity, altho I've found they're much slower than that. They are solid lead however, with a long bearing-surface and look ready-made to help smooth a bore.
I'd also run a patch trough the bore after EVERY shot to catch any left-over and accumulating residue. Plus one would have the benefit of feeling/seeing the patches (theoretically) get easier to push through bore as it became polished, indicating how successful and quickly the "firelapping" was working.
Apparently the procedure is indeed a very delicate one!
|
|
|
|
373 members (160user, 1lesfox, 1beaver_shooter, 1_deuce, 163bc, 12344mag, 40 invisible),
2,062
guests, and
1,012
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,493
Posts18,452,340
Members73,901
|
Most Online11,491 Jul 7th, 2023
|
|
|
|