I checked into it, about a year ago. It takes 13 different processes and they wanted over $250 for each mount, that took me out of the running, didn't need them that bad. Found a guy that had a bunch of them afterwards and bought 3 99 mounts off him, should have bought more but even the ones without 99 mounts are going high on Ebay nowadays. Check with Steve, he seems to be buying up Boone scopes left and right without 99 mounts so maybe he has some. Also got some 1920, 340, and some 22 Boone mounts off the guy. Tried a few months ago to get some more but never got a reply back.
I'm guessing you picked up the remainder of them Mike? Cool, that'll keep you searching for awhile. I'm gonna pick up a 340 in 222 and put one on it when I find a nice one. Found a model 7 that I'm gonna buy and mount a Boone on it to. The Boone mounts for the model 4's, 5's , 6's and 7's are pretty cool. They fit the same holes the #150 peep sights were mounted to. I think a 2 1/4 would be mint on a model 7. I thnk I got a shooter grade 1920 in 300 that I'm gonna put one on as well but might pass on the idea cause I'd like at least a 4 power on it and I don't think those old Boones will last long on a big gun.
Interesting. I didn't realize they were made to fit such a wide variety of guns. Were all of their mounts intended to attach via existing screw holes, or were some meant to have fresh holes drilled?
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
Some were meant to have holes D&T'd, my Boone mount for the 1920 mounts on the left side and looks like the same center to center as the Marbles S20 tang sight hole spacing. I'll take some pics of them Gary and email them over to you in case you run across something like them. I think the model 340 Boone mount uses the same holes as the #175 peep sight as well. Oh ya, I've got some Boone mounts here for the models 1914, 25 and 29's as well but they look like they've gotta be D&T'd as well. They're flat sided so I'd hazard a guess that they are mounted to the sides of the receivers.
Gary I have one however will have to sell with the remaining boone stuff I have (which includes a 4 power in pieces but complete) We leave to the west on wed if you are interested please let me know and I will post picts when I get back. thanks chris
What you have done is not nearly as important as how you have done it!!! The Old Fart 2008 A.D.
Howdy Gary well finally had a second to pull the boone stuff and get a pict or two the mount shows some wear and comes with screws. the 4 power is in pieces and needs a mirror glued back in place the original box and holding pouch are there as well. I think the only difference between the 2 and 4 power was the extended eye piece so I think you could just screw the longer eye piece on your 2 power and have a 4 power. If memory serves I have 150 into these and that is what I need to get out of them. Please let me know Thanks Chris
Last edited by ctw; 10/11/08.
What you have done is not nearly as important as how you have done it!!! The Old Fart 2008 A.D.
With all the tool and die makers here I had hoped someone would made a dozen or two.
![[Linked Image]](http://i145.photobucket.com/albums/r217/1899Sav/1464-1.jpg)
![[Linked Image]](http://i145.photobucket.com/albums/r217/1899Sav/557b_2.jpg)