Home Forums Hunting & Shooting Custom Rifles & Wildcats RIFLE BLUEPRINTS ONLY!

Nice, chambering?

708.

Glad you got my back.

Nice looking rig, I'm guessing the deer might be in trouble

Lefthand Mcmillan classic edge,lefthandCDL short action,260remington,#2hart 1-8twist finished at 23",holland recoil lug, ptg boltshroud, firing pin and trigger guard,fluted bolt by Kampfeld,6 pounds 2 ounces without scope. Mainly mountain rifle, but will double on some plains work. Daughter loves it.

Stellar job on that rig. Beautiful.

This is my favorite gun of all listed!

Thanks wsmfan. Its a sweet rig.

Although this one isnt completed yet, I'll post the specs. Pics will go up when she's done. Stiller tactical short action, Brux #3 SS barrel @ 23", Remington Mtn LSS stock, Borden BDL aluminum floorplate, Pachmayer Decel 1" pad, Stiller 0 MOA tac rail, Warne rings, Nikon 3-12x42SF w/duplex reticle, Timney trigger. Stock work done by Tim_in_TN. Caliber is 7-08 throated specifically for the 120NBT. Should be done in time for some late season whitetail plinking.(if not I'll have one ticked off wife.) Action is about 3 weeks out, then 3 to 4 weeks(shipping and smith work) then whatever time it takes for the stock.

http://picasaweb.google.com/mastrogeez/7mmDakotaPictures#


This is my new long range rig:
7mm Dakota
Stiller Predator action
HS precision Dbm and mag assembly
Mcmillan Rem Hunter edge stock
Rockcreek barrel #4 contour fluted 1-8.7 twist,finished at 24.5"
Jewell trigger set at 1.5lbs
Gentry 3 position safety
Pk Muzzle brake
Meopta 4x16 Tactical scope
Talley QD rings
Named it Bone Collector.

Finally weighed my rifle today.....sling, scope covers and all, no bullets.

Rifle's Inc. Titanium Strata in .270 weatherby.


Pics and Details down this page.....
http://www.24hourcampfire.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=1252702&page=23

I was going to guess a couple ounces heavier than it was. Scope is not the lightest thing out there, but I'm happy with the overall weight. This thing can shoot too, gets hot fast, but planning for only one shot to put 'em down.

Just wanted to clarify as I've received a couple PM's recently; I'm pretty sure it was 50/50 on the swirly colors.

Model 70 Classic Stainless
375 Weatherby
Action lightened and bolt fluted
Barrel turned to lighter contour and shortened to 20"
MPI Kevlar Stock
Tritium front sight
Brockman pop up rear peep
Talley rings and bases
Williams extractor
Duracoat finish on stock
7lbs 7 oz w/ Leupold 3.5-10 x 40
6 lbs 4 oz naked
Pushes 300 grain Partition at 2650fps with Reloader 17

How is recoil on something this light?

Sorry (lite)

"CARNIVORE"

Built by Karl Feldcamp of Kampfeld Customs.






.264 Winchester Magnum.
SS 700 ADL.
Lilja Fluted 30" 1-8 twist 3 groove throated for 130 grain TSX's.
Action Fully Blueprinted.
Factory X Mark trigger tuned to 2.5 lbs.
Kampfeld oversize recoil lug and double pinned.
Hunter style bolt.
Bolt sleeved and Fluted Rem TI style.
PTG SS triggerguard.
Metal blasted Aluminum Oxide.
8-40 Scope base screws.
Mcmillan Rem Hunter 13.75 LOP, 60% Purple, 25% Dark Gray, 10% Gray, 5% Black.. Skim bedded by Karl.
Leupold Dual Dovetail mounts and rings
*Not shown but wearing* Leupold Mark 4 4.5x14x50 30 mm scope.

Blueprinting? I am not sure if I fully understand the term, but I am going to take it to mean Gun Porn. So here are two of my most revcent buys/faves:

Postwar Mauser - this was built for an occupation forces GI:








When my other gun comes back from the 'Smitty/gun-fixer, I am going to hand him this one, and I will have him add a Peep Sight I bought fro a fellow board member. I had originally intended to buy a side scope mount, but the drop on this stock is such that it balances like a fine shotgun...no need to mess that up. It is in 8 Mauser, and at 50yds the tiny open sights and my bifocular eyes put groups in the 2" range. I be the addition of the Peep plus a white bead front and she will really tighten up/perfect for the woods of SC

_________________________________-

Here is my other - well, my other-latest, really. I had a thread going about it no too long ago:




[img]http://i10.photobucket.com/albums/a145/iambrb/za6.jpg[/img]

[img]http://i10.photobucket.com/albums/a145/iambrb/za4.jpg[/img]

[img]http://i10.photobucket.com/albums/a145/iambrb/za3.jpg[/img]

[img]http://i10.photobucket.com/albums/a145/iambrb/za2.jpg[/img]

[img]http://i10.photobucket.com/albums/a145/iambrb/za8.jpg[/img]

The bore is perfect and she throws 'em into MOA with the cheap-o ammo, thanks mostly to the set trigger. I can't wait to get into load development.

This what y'all meant???

Not really, take a look at past posts and the information they give. That's pretty much the format for a rifle blueprint in this context.

Nice lookin sticks though!

LH Charles Daly action
Douglas barrel chambered in .35 Whelen, 22"
Timney trigger
Oberndorf style flooplate assembly
NEGC banded front sight
Gentry barrel band and 3-position safety,
McFarland checkered bolt handle
Williams rear peep
Warne bases (can take a 2.5-8 Leupold in QD rings)
Decellerator Sporting Clays pad
Epoxy base coat finish, topped with oil.

utah708 thats a beautiful rifle!!!!