Home Forums Hunting & Shooting Rimfires Ruger 77/17 and 77/22's good, bad or ugly?

it is not so much the piece, but there needs to be a hole for the pin to secure it to the action. none of the other actions will have that hole. there were a few runs of blued rifles done in the boatpaddle stocks but those actions got the hole drilled in them at the factory. look at the all weather action and then look at yours and it should be obvious to what i'm talking about. maybe you will get lucky and have a blued action that had gotten drilled for the pin.

Will do thank,s David

BTW i think i still have my pieces from after i swapped my SS all weather out of it's bot paddle and into it's factory walnut stock. i'll look this weekend and if i still have it i'll give you a hollar.

i checked and i do have the pieces you need. if you find out your acton is set up to receive the pin to hold the assembly in place then give me a shout and you can have my parts, but if you're not set up for it i don't want to get rid of them to just sit there.

I have A stock found and I will get in tush with my friend tomorrow And PM you thank you . David

I have takeoff 77/17 HMR barrel. It is a slip and clamp system.

Bruce