Home Forums Hunting & Shooting Custom Rifles & Wildcats RIFLE BLUEPRINTS ONLY!

I'll try and freshen things up a bit..although this rifle has been done a couple months I'l put up a couple photos.

A early 50's M70 300 H&H action
lilja #2 ss barrel chambered in 300 H&H cut to 24.5"
echols legend stock w/edge fill
original BM
talley barrel band
talley lwts/swaro av 3-9x42
7 lbs-10oz. finished weight
I'm quite happy with how it turned out.

I'd like to know about the paint job on the stock. Color, type of paint, etc.

You're a killin' machine with that ancient stuff, Randy!

Older remington 700 action
Light contour Shilen barrel 24" plus vias brake
High Tech Specialties stock with decelerator pad
XS sights peep/base w/ williams ramp, windowed hood and fiberoptic bead
Nikon Monarch 3-9x40 w/ BDC reticle in warne QD rings
Parkerized

Weighs right at 7 pounds 14 oz all up with scope and just over 6 1/2 with scope removed.

Recoil is brisk but manageable and accuracy is good with 270gr tsx @ 2950fps.

Parts for my .308 shipped today to Robert Gradous:

-Surgeon 591 SA repeater, KMW Generation II bolt knob

-Krieger 5R stainless barrel = #7 light target contour, 1-11" twist, 22" long, recessed target crown

-McMillan A-5 = 13 5/8" fixed LOP, molded in Woodland Camo, sniper fill, non-adjustable

-Badger M4 steel bottom metal with Remington follower, spring & box

-Jewell trgger tuned to 2#

-All metal will be cerakoted in Graphite Black

-NightForce Ultra-Lite 30mm rings

-Zeiss Diavari T FL 4-16x50 scope


Pics hopefully posted in 2 months or so!!

Remington Model 7 action trued.
HS Precision stock in cammo skim bedded.
PTG shroud and pin.
PTG lug pinned.
Rock 5R #4 bbl-22"chambered for 6.5x47 Lapua
Rem trigger adj. to 2#.
308 bolt face, Pin bushed.
Work by Jon Beanland.
Shoots in the .2s with Hornady 123 A-Max hand loads.
8# scoped with a Swaro 6x.

.257 Roberts BY Malm @ Lock, Stock, & Barrel and from this form.
Montana Rifle Co Model 1999 short Action
Shilen SS Barrel 22"
McMillan Edge Stock
Timney Trigger 2.5lb
Talley SS Rings and mounts
Metal finish By Falcon Gun Finishing Color is Sniper Gray
Leupold VX-II 2-7X33mm LR Duplex

MontanaCreekHunter

What is your metal finish and color?

Thanks

Falcon Gun Finish Color is Sniper Gray

Very nice looking rigs folks

Remington SS SA Action, trued
Pacnor Rem Varmint Contour at 21"
223ai
McMillan A5, Precision Camo
Rifle Basix
Leupold VXIII 3.5-10
Talleys

Another one heading to Robert Gradous:

300 Win Mag

Defiance Machine long action, 0 MOA base, deep spiral fluted bolt body

Krieger SS 5R barrel, 1-11" twist, #5 contour, finish length of 24"

Vais muzzle brake installed, contoured to match barrel

McMillan Rem Hunter stock, standard fill, 13.5" LOP, McSwirley in 70% olive & 30% black.

Badger M4 bottom metal, Rem box magazine/spring/follower

Jewell trigger

All metal CeraKoted in Mil-Spec OD

NightForce Ultra-Lite rings

Schmidt&Bender Zenith 3-12x50

Just picked up my 280ai from Mr. Coleman and I am pleased with the rifle.

McMilan Edge in black
Douglas 1:9 twist (I believe) 24in stainless barrel
Rem action and factory trigger set to 2 lbs.
Leupold base/rings
Zeiss Diavari 3-9X36

Can't wait to shoot this.

worthless without pictures.....

Nice rig.

My parts are on order for Robert to build me my next one. I have have used Kampfeld, Borden, HCR and Jarrett for all my other customs with great success, From all the positive feed back on Robert it sounds like I made a great choice for my next build

Stiller Predator
Lilja #2 23" w/muzzle break
Jewell Trigger
Wyatt Extended Magazine Box
McMillan Hunters EDGE
Talley Lightweights
Leupold 2.5-8 B&C
Tubb Titanium Striker w/ Aluminum Shroud
300 WSM
6lb 13oz

i like that very much! but does it shoot? grins

A very nice list of parts for a lightweight build. Nice blueprint!

Kinda :-)

that's a definite keeper.