24hourcampfire.com
24hourcampfire.com
Previous Thread
Next Thread
Print Thread
Hop To
Page 6 of 7 1 2 3 4 5 6 7
Joined: Apr 2009
Posts: 1,200
R
Campfire Regular
Offline
Campfire Regular
R
Joined: Apr 2009
Posts: 1,200
Originally Posted by TannerGun
Originally Posted by US_Patriot
Originally Posted by BobinNH
#4 SS fluted 8.5 twist Barltein 6mm barrel. Chambering will be 6XC.

This is going to be a walking varmint/range rifle,shooting mostly the Amax/Berger type bullets,105-107 range. I will drop it into a sporter weight stock


Now that you have to buy an action; Find a doner rifle and part it out.

New Haven M70 Classic
Tubb firing pin
Tubb firing pin spring
Tubb cocking piece
Jewell trigger
McMillan Stock

Have your smith sugar up an action and screw on your barrel. With all your M70 experience it will be a natural fit to hunt with the 6XC in a M70 platform. All the Tubb parts are available at SSS the home of the 6XC.

Many nice custom actions out there but a good custom Winchester still gets a lot of respect from others at the range and can shoot with the best. Also that big Nightforce will be sweet on top of a Winchester Express, Sako Varmint, or Hunter stock...
Liking this idea. Bruce Artus and Kreg Slack a couple yeas back were shooting out to 3000 yards with a .308 A.I. and 264 Win Mag, based off M70s. Artus said they'd pretty much hold a flame to most custom actions...


Yes that is what they claimed, you try and shoot a bullet and hit something after it has been sub-sonic for over a mile...............it does not happen. I have tried it!!

BP-B2

Joined: Feb 2011
Posts: 11,273
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Feb 2011
Posts: 11,273
Pretty hit and miss out there, pun intended! But Kreg did kill a groundhog with a 338 Lapua at something like 3000 yards. Not like that's repeatable though wink

Joined: Sep 2003
Posts: 14,807
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Sep 2003
Posts: 14,807
Dave,

The M70's are still used for target competition to this day here in CT.

The matches that I participated in was the Big Bore League at the Blue Trail Range in Middlefield, CT where we fired 25 shots for record at 200 yds from four positions.

At the Yankee League in Southington, CT we shot the same course seven times a year.


All guns should be locked up when not in use!
Joined: Dec 2006
Posts: 24,851
T
Campfire Ranger
Offline
Campfire Ranger
T
Joined: Dec 2006
Posts: 24,851
Wow 200 yds.....how do you do it?


.
Joined: Feb 2011
Posts: 11,273
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Feb 2011
Posts: 11,273
Savage... Cool looking spot there. Be a nice place to shoot for sure.

IC B2

Joined: Oct 2009
Posts: 5,197
Campfire Tracker
Offline
Campfire Tracker
Joined: Oct 2009
Posts: 5,197
[Linked Image]
[Linked Image]
[Linked Image]

My "X Factor" is a crusher out to and beyond 1000 meters with 115 VLD's at 3000fps....The 6XC might just be the best longrange coyote rifle ever. Kills other stuff pretty good too.....grin!


Luck....is the residue of design...
[Linked Image]
Joined: Jan 2007
Posts: 35,900
B
BobinNH Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
B
Joined: Jan 2007
Posts: 35,900
Originally Posted by StrayDog
Bob,
So many custom after market parts for the 700, not so many for the Sako.


StrayDog: Yes it seems that way. Don't want anyone to think I don't like Rem 700's....I have had quite a few,and have shot lots of varmints with them, mostly woodchucks here in NE with a couple of 22-250's a 220 Swift Classic,and a 222.

Also a 25/06,and a couple of Roberts MR's.I also have a MR that I leave in Wyoming at the ranch as my backup rifle....just have never needed it.I will likely go with a Remington or Defiance for this project.I'm sure either will work fine.




The 280 Remington is overbore.

The 7 Rem Mag is over bore.
Joined: Dec 2006
Posts: 24,851
T
Campfire Ranger
Offline
Campfire Ranger
T
Joined: Dec 2006
Posts: 24,851
Well....hurry up and get going on it....

grin


.
Joined: Jan 2007
Posts: 35,900
B
BobinNH Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
B
Joined: Jan 2007
Posts: 35,900
Originally Posted by scenarshooter
[Linked Image]
[Linked Image]
[Linked Image]

My "X Factor" is a crusher out to and beyond 1000 meters with 115 VLD's at 3000fps....The 6XC might just be the best longrange coyote rifle ever. Kills other stuff pretty good too.....grin!


Yahoo! Pat to the rescue.....! grin

That's what I'm talkin about getting! Pat's rifle looks like it has a heavier barrel than mine will.

Last edited by BobinNH; 02/14/12.



The 280 Remington is overbore.

The 7 Rem Mag is over bore.
Joined: Jan 2007
Posts: 35,900
B
BobinNH Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
B
Joined: Jan 2007
Posts: 35,900
Geezus Tom I just got started! My brain is addled going through all the damned options! eek

I'm on it.... grin




The 280 Remington is overbore.

The 7 Rem Mag is over bore.
IC B3

Joined: Dec 2006
Posts: 24,851
T
Campfire Ranger
Offline
Campfire Ranger
T
Joined: Dec 2006
Posts: 24,851
Laffin'

Hey did you ever get a .264 Mag you were pondering a bit back?


.
Joined: Feb 2011
Posts: 17,719
W
Campfire Ranger
Online Content
Campfire Ranger
W
Joined: Feb 2011
Posts: 17,719
99, that was a sharp looking single shot in the photo..how about a bit of back ground on the rifle and scope...


Molon Labe
Joined: Feb 2011
Posts: 11,273
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Feb 2011
Posts: 11,273
Pat, thinking that I may have to get one of those leather cheek pads from you... they look sharp.

Joined: Dec 2010
Posts: 1,789
Campfire Regular
Offline
Campfire Regular
Joined: Dec 2010
Posts: 1,789
Originally Posted by TannerGun
Pat, thinking that I may have to get one of those leather cheek pads from you... they look sharp.


yup... i think I am gonna get one of those too. grin

Joined: Sep 2003
Posts: 14,807
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Sep 2003
Posts: 14,807
The rifle is a Winchester High Wall done by the late Floyd Butler of Poultney, VT.

He used a Buhmiller barrel and made the stock and all the smith work. Its chambered for the .219 Improved Zipper. The scope is a 10X Lyman Supertargetspot.

I have used the rifle for about 50 years. Back when there were lots of chucks that rifle got it's share. Most of the shooting was with that marksmans sling from prone or sitting.

Butler link

[Linked Image]


All guns should be locked up when not in use!
Joined: Feb 2011
Posts: 11,273
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Feb 2011
Posts: 11,273
Are those cheek pads available? wink

Joined: Jan 2007
Posts: 35,900
B
BobinNH Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
B
Joined: Jan 2007
Posts: 35,900
Originally Posted by Tom264
Laffin'

Hey did you ever get a .264 Mag you were pondering a bit back?


Tom: I've had three 264's, the last about 4 years ago now.No, I haven't bought one recently.




The 280 Remington is overbore.

The 7 Rem Mag is over bore.
Joined: Sep 2009
Posts: 11,902
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Sep 2009
Posts: 11,902
Bob,

If you are considering upgrading to a custom action I would recommend you check out the McMillan G30. Of all the upgrade 700 style actions this one is my favorite for a number of reasons.

1. Highest grade of materials, 17-4 PH stainless for the receiver and 9310 bolt.

2. Rear bridge is dropped down to accept all Rem 700 scope mounts. Most custom actions take the easy way out and keep the rear bridge at full diameter.
[Linked Image]

3. Large loading port gives better access to the action and makes loading and unloading surer and easier. I am not a fan of the reduced size loading ports in most custom actions as the minimal gain in stiffness is not worth the hassle of loading when I have gloves on or am in a hurry.

4. Functional bolt fluting. In my opinion fluting is done to give dirt and crap a place to go when operating under less than sterile conditions. Every other action I have seen stops the flutes short of the bridges and therefore it serves no purpose but cosmetic and a very minor reduction in action weight. The flutes on the G30 run under the bridges. The flutes are also not cut with a ball nosed endmill but rather with a milling cutter that produces steeper side walls in the flutes and more efficient flute geometry for breaking ice under the bridges.
[Linked Image]
5. The G30 has an enclosed cocking piece and it will help prevent gas from reaching the shooter in the event of a catastrophic case failure. I had a major case blow up in my G30 264 Win Mag (The one you shot) from a major screw up (bore obstruction) and no gas made it to my face.

6. The best designed primary extraction cam I have seen.

7. The firing pin/cocking piece can quickly be removed from the bolt in the field without tools.
[Linked Image]
8. Being a push feed action allows the G30 to have the spring-loaded plunger ejector that ejects the case sooner in the cycle than a blade style ejector. The problem with a spring loaded plunger is, very rarely, it can stick under harsh conditions or more commonly if you are running high pressure loads and shaved brass accumulates in the plunger bore. As a back up the G30 also has a blade style ejector that will kick the case out at the end of the stroke if the plunger ever fails.
[Linked Image]
9. The claw extractor is an improved Sako style.

All this extra costs extra and the G30 is pretty pricey but when you consider the cost of the G30 vs other custom actions you are at least getting something other than a warmed over 700 with a shiny polish on it. (Said in jest and not meaning any disrespect for any one elses favorite action) laugh laugh

On the 20 MOA bases I saw a Weaver 20 MOA rail the other day in a gun store for 30 bucks for the Rem 700. It was aluminum so it will be pretty light weight for a 1 pc rail.

For me I like the Rem 700 for the economics and solid functionality but if I want a better action I need to actually get more than a tighter fitting bolt, smaller loading port and shiny finish. The G30 is darn sure better. At least in my opinion. grin


John Burns

I have all the sources.
They can't stop the signal.

Joined: Mar 2002
Posts: 9,123
A
Campfire Outfitter
Offline
Campfire Outfitter
A
Joined: Mar 2002
Posts: 9,123
John what does the G30 run for bolt to raceway clearances?
And is the bolt and handle 1pc?

Last edited by Ackleyfan; 02/15/12.
Joined: Mar 2006
Posts: 20,787
R
Campfire Ranger
Offline
Campfire Ranger
R
Joined: Mar 2006
Posts: 20,787
Originally Posted by joelkdouglas
Of those two to select from (Rem or Sako), I would choose the 700.

http://www.brownells.com/.aspx/pid=26367/Product/SHORT-ACTION-RECEIVER-BOLT

Another option, if you are blessed with bountiful resources.



Maybe not this particular action but I would definitely go with one of the Rem 700 clones of quality. It's just too easy to pass on, like Mr. Burns suggested.


Throttle fixes everything. If it doesn't fix the problem, it’ll end the suspense.
Page 6 of 7 1 2 3 4 5 6 7

Moderated by  RickBin 

Link Copied to Clipboard
YB23

Who's Online Now
702 members (160user, 117LBS, 10gaugemag, 12344mag, 01Foreman400, 81 invisible), 2,681 guests, and 1,313 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,187,688
Posts18,399,798
Members73,820
Most Online11,491
Jul 7th, 2023


 







Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.148s Queries: 15 (0.010s) Memory: 0.9079 MB (Peak: 1.0678 MB) Data Comp: Zlib Server Time: 2024-03-28 22:45:22 UTC
Valid HTML 5 and Valid CSS