Home Forums Hunting & Shooting Handguns Any custom Blackhawks out there?

I've got a really clean three screw 41 mag with a 6 1/2 in barrel I'm thinking about doing some some customizing to in the future. I'm thinking some case hardening and a bisley hammer and frame. May even cut back the barrel to 5 1/2 or 4 5/8. And upgraded sights. Something like an Keith no. 5. Anyone have some with work done and who did he work?

I've done some DIY stuff to my old pre-warning 7.5" Super Blackhawk,

- cut bbl to 4 5/8" (gunsmith did that)
- steel ejector rod housing
- Belt Mtn locking cyliner pin, Keith style
- Bowen Arms Rough Country rear sight

MontanaMarine,

What bullet is that?... Meplat looks wider than a WFN!

Jerry

I have some and most were done by Alan Harton with a couple by Hamilton Bowen. Here's a couple of 44 Special's done on mid-frame 357's for a look at Turnbull case colors, trigger options, etc.

Harton.





Bowen.



And a TLA #5.

Turnbull for sure

Gonna get my .45LC done soon

Nothing real fancy, just practical.

An SBH .44 mag 5.5" converted to a Bisly grip frame, ivory polymer grips, trigger job, Belt Mountain base pin:

Back in 2000 when Ruger discontinued the .41 Magnum Bisley I couldn't find one anywhere. Since I really wanted a stainless ayway I had Gary Reeder use a stainless frame and built a 5 shot 5.5" with his Gunfighter gripframe which is just a little different from the Bisley frame.





The barrel and cylinder are much heavier than stock but it will handle any load you want to put in it...

Your ideas of a case hardened frame and Bisley gripframe sound real nice. Since the barrel is being shortened you may want to get a replacent front sight base that will take easily interchangeable blades and Bowen rear sight.

Bob

Custom work is great You will find lots of great custom ideas on this forum and on the net. You will go crazy trying o figure out exactly what you want and end up with more than one custom

.32 mag. Octogan barrel, Suber Blackhawk style hammer, steel ERH, Steel grip frame All done by Harton. Grips by Josh Jollie


Single six, S&W barrel, Steel ERH and frame. SBH style hammer by Clements. Custom grips All done by Harton


Blackhawk .357 bored out to .44 special Octogan barrel, #5 grip frame, bisley hammer, custom stocks All work done by Harton. Grip frame, trigger, hammer from Powers Custom. I think barrel came from Clements.


.357 flattop. Bisley hammer, birdshead grip frame, and stocks I think done by Clements

Another option on a hammer is to trim the SBH hammer profile and thumb pad some. Looks pretty nice and can be done on your own if handy with a file. This Bisley was once a SBH.

Very nice EdM. I like the look.

Jerry,

It's an Oregon Trail 310gr WFNGC.

http://www.midwayusa.com/product/95...grain-lead-flat-nose-gas-check-box-of-50


1200 fps via 20.5gr H110. That's about the most I care to hang on to, in a handgun.

This .44 mag Super BlackHawk has been customized. The barrel was cut down to 4 5/8" with a Poly rib and a presentation grip by Pachmayr. I carried it in a cross draw rig for two weeks on a bowhunting float trip in Alaska. The only time I took it off was when I was sleeping, but even then it was within reach. When I got back to civilization and packed it away, I could relate to the line from the old western movies "I feel naked without my gun".

Robster do you think a stainless steel Super Black Hawk cut down and made into a Bird's head revolver?

I'm thinking Bird's Head grip.

Cut the barrel to just in front of the ejector rod.

Round down the top strap and put in a sight channel with a new front sight.

I'm looking to the day when I can still shoot but may not be able to rack the slide on my 1911. I don't hunt any more and I already have a good .44 mag Super Black Hawk with a 5&1/2" barrel. I think what I have described would make a good self defense revolver.

Ruger (through Talo) just brought out a nice Super Blackhawk with a 3 3/4" barrel, non fluted cylinder. Throw a birds head on that and you'd have quite a prize. I prefer mine without the birds head but to each his own.

I would try shooting a SBH .44 with a birdshead first I am not big into recoil, and I think that that gripframe might be too much for me. I have heard of them in .45LC but doesn't have the sharp report .44 has for me.

Agree. I do not believe a BH grip frame and anything with any kind of recoil belong with one another.

These are sweet! This is all I need, another itch to scratch. Lol

I would load my .44 mag to .44 Special velocities. Recoil should be a problem.

Still it might be better to just get a .44 Special Ruger. It's just that my Ruger doesn't have the lock.

Beautiful revolvers Ed.
Given your SUPERB collection, and the Idaho/Texas location, did you get a new username, or is Tony your doppelganer?

Same, same. Thought I would use my name rather than my son's.