24hourcampfire.com
24hourcampfire.com
Previous Thread
Next Thread
Print Thread
Hop To
Joined: Dec 2012
Posts: 9
B
New Member
OP Offline
New Member
B
Joined: Dec 2012
Posts: 9
I have a old Mauser that is a 7x57mm, on the side of the reciever it says "Deutsche Waffen-und Munitionseabriken Berlin. Then on the reciever and barrel there is a stamp on both saying C6838. Then on the bottom where the ammo goes and is near the trigger it says twice 2N 1805. Those are all the markings. If needed i will load pictures upon request.

BP-B2

Joined: Sep 2012
Posts: 884
T
Campfire Regular
Offline
Campfire Regular
T
Joined: Sep 2012
Posts: 884
Sounds like a M1895 Chilean Mauser. Lets see a picture.


Rich or poor, it pays to have money.
Joined: Dec 2012
Posts: 9
B
New Member
OP Offline
New Member
B
Joined: Dec 2012
Posts: 9
can you give me ur email so i can send them to you and you can upload them. Its saying the files are to big to upload

Joined: Feb 2006
Posts: 2,404
Campfire Regular
Offline
Campfire Regular
Joined: Feb 2006
Posts: 2,404
Yep, pictures are required.
All original military or sporterized??
If military, most parts have a SN (or portions of the number).
Any crest of a country on top of receiver?
Certain original matching, unmucked Mausers fetch a small fortune these days.
Some DWM info...
DWM

Joined: Dec 2012
Posts: 9
B
New Member
OP Offline
New Member
B
Joined: Dec 2012
Posts: 9
Theres no crest of any country, the pictures i have are to large to be posted

IC B2

Joined: Dec 2012
Posts: 9
B
New Member
OP Offline
New Member
B
Joined: Dec 2012
Posts: 9
http://s1276.beta.photobucket.com/user/beaubailey12/library/ Go to that website to look at the pictures

Joined: Jan 2008
Posts: 15,698
M
Campfire Ranger
Offline
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
well it's a small ring german. looks like a chilean without the markings. i'd guess a model 93 or 95

Joined: Dec 2012
Posts: 9
B
New Member
OP Offline
New Member
B
Joined: Dec 2012
Posts: 9
is it worth anything?

Joined: Dec 2012
Posts: 9
B
New Member
OP Offline
New Member
B
Joined: Dec 2012
Posts: 9
and would it matter if i drilled and tapped it for a scope? or should i just get a B square scope mount for it

Joined: Jan 2008
Posts: 15,698
M
Campfire Ranger
Offline
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
it's hard to say what it's worth because sometimes one little stamp or feature is more or less desirable to a collector. if you pull the bolt and then look at the bolt face, does it have a flat bottom as you have it right side up and looking at the bolt face?

the small rings were made before metallurgy and gun design were at their peak and so are not as safe as later models like the 98. nothing wrong with your rifle though. i'd have a gunsmith look it over and make sure it's safe and then enjoy using it. smile

IC B3

Joined: Jan 2008
Posts: 15,698
M
Campfire Ranger
Offline
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
1805 is the serial number. it's good that it matches.

Joined: Jan 2008
Posts: 15,698
M
Campfire Ranger
Offline
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
the bolt handle would have to be bent or replaced so it would clear a scope. between that and bluing it would likely cost you close to $400.

this is a case where you might be ahead by using it as-is. nothing wrong with a mauser, just that this is an old fashioned rifle, that's all.


Joined: Dec 2012
Posts: 9
B
New Member
OP Offline
New Member
B
Joined: Dec 2012
Posts: 9
bolt is already bent so im okay with that and blueing really doesnt bother me. Should i drill and tap it for a scope or should I go for a B square one and get a Long eye relief scope?

Joined: Jan 2008
Posts: 15,698
M
Campfire Ranger
Offline
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
it's worth- in today's money, not much. there were millions of these and just not rare enough to be worth much.

however they're wonderful little rifles for target shooting and hunting. it's like your grandpa's pocketknife. not worth much if you try to sell but worth a lot to use and keep.

Joined: Jan 2008
Posts: 15,698
M
Campfire Ranger
Offline
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
the bolt is bent but what i am talking about is the angle needs changed. that bolt is like one i have- will not clear a scope unless you mount it way high where it's not comfortable to use.

Joined: Jan 2008
Posts: 15,698
M
Campfire Ranger
Offline
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
i'd ask a gunsmith about drilling and tapping. they can give you a lot more info. maybe post in the gunsmith section on this forum.

Joined: May 2003
Posts: 10,417
Campfire Outfitter
Offline
Campfire Outfitter
Joined: May 2003
Posts: 10,417
Just a plain old 93 or 95. Hunk of history, but nothing special.
It will be fine as a project rifle for you.
If the bore is good, and if it shoots pretty well with iron sights, then I would consider doing more work on it, like re-bending the bolt, that curve won't clear a scope.
One caveat, keep it in 7x57 and don't try to push it real hard. The gas control design is not the best, and there's no third lug. Furthermore, steel had some major changes for the better in the 1910s. But 7x57 is fine.
So get her nice and clean, see how she does on paper with the iron sights. If you get under 2 inch groups with the usual crummy sights, there's potential, and it might be worth bending the bolt, mounting a real scope, and doing the bedding and floating. 4 to 6 inches, I'd either go with a new barrel in 7x57, or troll the gun shows with it.


Up hills slow,
Down hills fast
Tonnage first and
Safety last.

Moderated by  RickBin 

Link Copied to Clipboard
YB23

Who's Online Now
715 members (007FJ, 1beaver_shooter, 10gaugemag, 10Glocks, 06hunter59, 222ND, 74 invisible), 2,788 guests, and 1,316 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,187,630
Posts18,398,794
Members73,817
Most Online11,491
Jul 7th, 2023


 







Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.141s Queries: 14 (0.002s) Memory: 0.8641 MB (Peak: 0.9805 MB) Data Comp: Zlib Server Time: 2024-03-28 16:20:22 UTC
Valid HTML 5 and Valid CSS