24hourcampfire.com
24hourcampfire.com
Previous Thread
Next Thread
Print Thread
Hop To
Page 3 of 6 1 2 3 4 5 6
Joined: Jan 2009
Posts: 8,851
P
Campfire Outfitter
Online Content
Campfire Outfitter
P
Joined: Jan 2009
Posts: 8,851
Originally Posted by ctsmith
Edge stocks are not as solid as standard fill.
Where did you come up with that info?

BP-B2

Joined: Oct 2011
Posts: 4,070
C
Campfire Tracker
Offline
Campfire Tracker
C
Joined: Oct 2011
Posts: 4,070
I'll borrow this pic of a Manners light fill. The fill material (the white colored fill) used in the Edge and in Manner's lighter stocks is not as solid as that in standard fills. Manners acknowledges this and at least uses the more solid, durable fill in critical areas (the gray colored fill material).

I found a bubble in the paint of my most recent edge. After I removed the paint I didn't like what I found. I made several calls to men who bed these stocks day in and day out and found out that this was not unusual and the reason they all preferred standard fill.


Manners with standard fill in critical areas:

[Linked Image]


My last Edge, around the rear action screw pillar. I believe Manners is using their heavy fill behind the rear action screw, the same place where I have a void. It doesn't give me a warm fuzzy feeling.

[Linked Image]




Joined: May 2008
Posts: 16,540
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2008
Posts: 16,540
EDGE isn't merely a fill material it is a complete package of fill material and shell construction.
All of my EDGE stocks have been every bit as stiff and solid as my standard construction McMillans have been.
No more standard construction McMillans for me ever.
But then my tolerance for recoil stops at the .300WSM/.300WM level.


The Chosin Few November to December 1950, Korea.
I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
Joined: Feb 2009
Posts: 6,764
T
Campfire Tracker
Offline
Campfire Tracker
T
Joined: Feb 2009
Posts: 6,764
Originally Posted by ctsmith
Edge stocks are not as solid as standard fill. Most respected smiths I've talked to shy away from it. I had a situation that definitely gave me reason to doubt in them. Edge is a slam dunk only if you intend to weigh your rifle and not use it.



thanks for the laugh..


Guns don't kill people, drivers with cell phones kill people.
Joined: Oct 2011
Posts: 4,070
C
Campfire Tracker
Offline
Campfire Tracker
C
Joined: Oct 2011
Posts: 4,070
Here's something else to chew on:

Originally Posted by a10xrifle
SL on the Xtreme Hunter. Mainly due to the increased strength. 3 oz weight difference was not worth it to sacrafice the rugedness.

These New EH serries stocks are really nice but the fill is seriously ultra light. Im still a fan of the 90% CF shell and std light fill its indestructable!!!!

G.A. Precision

IC B2

Joined: May 2008
Posts: 16,540
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2008
Posts: 16,540
Originally Posted by ctsmith


My last Edge, around the rear action screw pillar. I believe Manners is using their heavy fill behind the rear action screw, the same place where I have a void. It doesn't give me a warm fuzzy feeling.

[Linked Image]





Send it back to McMillan and they'll fix it.

Or keep it and complain.

Your choice.


The Chosin Few November to December 1950, Korea.
I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
Joined: Oct 2011
Posts: 4,070
C
Campfire Tracker
Offline
Campfire Tracker
C
Joined: Oct 2011
Posts: 4,070
Toad, did you see the pics?

Joined: May 2008
Posts: 16,540
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2008
Posts: 16,540
Looks like you prefer the second option.

TFF!!


The Chosin Few November to December 1950, Korea.
I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
Joined: Oct 2011
Posts: 4,070
C
Campfire Tracker
Offline
Campfire Tracker
C
Joined: Oct 2011
Posts: 4,070
nsaqam, please show me where I complained? I fixed it myself. I called around to guys who see more in a week than I do in years and was told its not unusual for edge fills but highly unusual in standard fills.

Joined: Oct 2011
Posts: 4,070
C
Campfire Tracker
Offline
Campfire Tracker
C
Joined: Oct 2011
Posts: 4,070
Originally Posted by nsaqam
Looks like you prefer the second option.

TFF!!



Dude, you are dreaming. I have never complained. Only reported facts.

IC B3

Joined: May 2008
Posts: 16,540
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2008
Posts: 16,540
You've been complaining about the void this entire thread.
Why'd you fix it yourself when McMillan would've done it for free?


The Chosin Few November to December 1950, Korea.
I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
Joined: May 2008
Posts: 16,540
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2008
Posts: 16,540
Originally Posted by ctsmith
Originally Posted by nsaqam
Looks like you prefer the second option.

TFF!!



Dude, you are dreaming. I have never complained. Only reported facts.


In your sample of one?

That's certainly conclusive.


The Chosin Few November to December 1950, Korea.
I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
Joined: Oct 2011
Posts: 4,070
C
Campfire Tracker
Offline
Campfire Tracker
C
Joined: Oct 2011
Posts: 4,070
nsaqam

1 - please quote where I complained

2 - I fixed it because I can, and it was a lot less hassle than sending it back.

3 - you are absolutely correct. My sample of one was not enough. Thats why I made calls to guys (reputable gunsmiths) who see a lot more than me. All three that I talked to preferred standard fill because of experiencing similar issues with the Edge fill.

4 - What do you make of George's post that I quoted above? In regards to Manners, even standard fill in critical areas is not enough for George.

Joined: May 2008
Posts: 16,540
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2008
Posts: 16,540
Call three more and they may tell you differently.

George is entitled to his opinion as are you and I.

You say it's not complaining posting pics and relating your experience with one EDGE.
I say it is.
The opinion thing once again.


The Chosin Few November to December 1950, Korea.
I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
Joined: Apr 2009
Posts: 18,895
S
SLM Offline
Campfire Ranger
Offline
Campfire Ranger
S
Joined: Apr 2009
Posts: 18,895
Originally Posted by nsaqam
Call three more and they may tell you differently.

George is entitled to his opinion as are you and I.

You say it's not complaining posting pics and relating your experience with one EDGE.
I say it is.
The opinion thing once again.



But with Tikka it's not?

Joined: May 2008
Posts: 16,540
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2008
Posts: 16,540
Of course it is.

That does not change the FACT that all synthetic T3's use the luggette, a long action, a cheap feeling IM stock, a protruding magazine, a plastic shroud, a dovetailed bolt handle, a plastic TG, and use expensive replacement parts.


The Chosin Few November to December 1950, Korea.
I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
Joined: Dec 2004
Posts: 20,379
Campfire Ranger
Offline
Campfire Ranger
Joined: Dec 2004
Posts: 20,379
Originally Posted by ctsmith
Edge stocks are not as solid as standard fill. Most respected smiths I've talked to shy away from it. I had a situation that definitely gave me reason to doubt in them. Edge is a slam dunk only if you intend to weigh your rifle and not use it.


BWAAAAAHAAAAAHAAAAA!!!


Originally Posted by captain seafire
I replace valve cover gaskets every 50K, if they don't need them sooner...
Joined: Oct 2011
Posts: 4,070
C
Campfire Tracker
Offline
Campfire Tracker
C
Joined: Oct 2011
Posts: 4,070
Originally Posted by Rancho_Loco


BWAAAAAHAAAAAHAAAAA!!!



Whats is your take on it? Are Edge stocks as durable as standard fill stocks, in your opinion?

Joined: Dec 2004
Posts: 20,379
Campfire Ranger
Offline
Campfire Ranger
Joined: Dec 2004
Posts: 20,379
I'm very comfortable using edge stocks within the parameters set by McMillan.


Originally Posted by captain seafire
I replace valve cover gaskets every 50K, if they don't need them sooner...
Joined: Jan 2009
Posts: 10,101
S
Campfire Outfitter
Offline
Campfire Outfitter
S
Joined: Jan 2009
Posts: 10,101
Be cool to see a strength test using one of each. I'll supply the truck if someone supplies the Edge & McSwirly.

Page 3 of 6 1 2 3 4 5 6

Moderated by  RickBin 

Link Copied to Clipboard
YB23

Who's Online Now
657 members (01Foreman400, 222ND, 160user, 1234, 1lessdog, 2500HD, 71 invisible), 2,825 guests, and 1,358 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,187,651
Posts18,399,172
Members73,817
Most Online11,491
Jul 7th, 2023


 







Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.106s Queries: 15 (0.003s) Memory: 0.8984 MB (Peak: 1.0501 MB) Data Comp: Zlib Server Time: 2024-03-28 18:37:13 UTC
Valid HTML 5 and Valid CSS