|
Joined: Oct 2006
Posts: 10,089
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Oct 2006
Posts: 10,089 |
While I'm doing tires I'm giving some thought to new shocks too. Is this a DIY thing? Looks pretty straight forward.
What is a good shock for a 99 Tahoe?
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Feb 2006
Posts: 6,850
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2006
Posts: 6,850 |
Shocks are simple. Usually 2 bolts ( top and bottom). Being in rust bucket michigan, I would replace the bolts also.
|
|
|
|
Joined: Aug 2008
Posts: 1,391
Campfire Regular
|
Campfire Regular
Joined: Aug 2008
Posts: 1,391 |
The factory shocks on my last two 3/4T Chev trucks were a just horrible. I replaced them with Bilstein. Much improved ride and they last a long time.
|
|
|
|
Joined: Oct 2006
Posts: 10,089
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Oct 2006
Posts: 10,089 |
Just priced the Bilstein's, there not exactly givin them away...
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Oct 2005
Posts: 2,169
Campfire Regular
|
Campfire Regular
Joined: Oct 2005
Posts: 2,169 |
Recently replaced shocks on the 1/2 ton Suburban. Went with Monroe Reflex Monotube. Took about 3 hours to do all 4. Much improved ride.
|
|
|
|
Joined: Oct 2006
Posts: 10,089
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Oct 2006
Posts: 10,089 |
T Bone, what year is your burban?
I have been shopping shocks on line, seems like there either cheap or pretty expensive, is it worth it to spend the extra coin?
Last edited by passport; 07/20/14.
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Sep 2012
Posts: 8,729
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2012
Posts: 8,729 |
Put some new Monroe or KYB's on it. Not that hard, will be a definite improvement.
Sean
|
|
|
|
Joined: Mar 2006
Posts: 17,289
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 17,289 |
I put a set of Monroe Reflex shocks (non-monotube) on my truck and here's the good and not quite so good.
The good ...
My truck corners like it's on rails and they're a definite improvement over the OEM shocks as far as handling goes. There's no body roll to speak of on windy roads. I can take 45 mph corners at 65 mph and it stays flat. It also sits up slightly higher and there's no problems with carrying heavy loads.
The not quite so good ...
The suspension is slightly stiffer and it doesn't have the Cadillac ride it had when it was new. It has the feel of a sport tuned or touring suspension. Don't get me wrong though it's not harsh like an off-road suspension and it rides smoother than a stock Z-71 with Bilsteins.
One other factor is the tires (Firestone LEs) I have on the truck. They have a slightly stiffer sidewall which is a good thing because they don't sag. They can hold 40 PSI (I run them at 35) which is higher than the previous tires I've had and I can pump 'em up when I load the truck to the gills.
One other factor that might contribute to the slightly stiffer ride is my truck is 16 years old and the rubber bushings in the front end are getting stiff. They don't dampen minor bumps as well as they used to.
The Reflex shocks improved the cornering and handling but it also comes with the compromise of a slightly firmer ride. I like the ride and I really like how it corners but if I have to replace them I'm going to look for a different brand or type of shocks that give a slightly smoother ride.
I'll add this too. A brand new OBS Tahoe, IMO, rode really nice. They had a little bit of body roll in the corners but they were smooth as can be on the road.
|
|
|
|
Joined: May 2005
Posts: 14,104
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2005
Posts: 14,104 |
IME, if you mostly drive on pavement, Monroes would be my choice. If you throw in a lot of unpaved roads, two-tracks and other rough surfaces, I would recommend Ranchos. Admittedly, there are several other brands that I haven't tried but these are the ones that have worked best for me.
Ben
Some days it takes most of the day for me to do practically nothing...
|
|
|
|
Joined: Mar 2006
Posts: 17,289
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 17,289 |
Not to disagree but just to add ... I put a set of Rancho shocks on a 86 Toyota and I didn't like them. They were way too stiff for that truck.The Monores I have do great on bumpy dirt roads but my 1/2 T Chevy has always been smooth. At 30 mph it's a bit bumpy but if you speed up to 50 mph or so it smooths right out.
|
|
|
|
Joined: Aug 2006
Posts: 1,999
Campfire Regular
|
Campfire Regular
Joined: Aug 2006
Posts: 1,999 |
Bilstein's Best ride. Best performance......
When the tailgate drops the BS stops.
|
|
|
|
Joined: Aug 2011
Posts: 8,707
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2011
Posts: 8,707 |
My 98 Z71 came with Bilstien's When it was time for new shocks, I bought and installed Bilstien's.
Same firm ride that I was used to. Shock replacement is easy.
|
|
|
|
Joined: Oct 2005
Posts: 2,169
Campfire Regular
|
Campfire Regular
Joined: Oct 2005
Posts: 2,169 |
T Bone, what year is your burban?
I have been shopping shocks on line, seems like there either cheap or pretty expensive, is it worth it to spend the extra coin? '04 1/2 ton Suburban. Replaced shocks at 100k. 95% pavement. Can't say if it's worth it to spend a bit more $. Usually, you get what you pay for.
|
|
|
|
Joined: Mar 2009
Posts: 7,177
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2009
Posts: 7,177 |
Bilstein shocks are great. Had a set on my 1 ton dodge diesel and it wasn't a bad ride at all. I think that most aftermarket shocks are an improvement over worn out stock shocks
I went with old man emu on my tundra as they were valved for use with the springs I put on it and it rides great
|
|
|
|
Joined: Nov 2002
Posts: 33,529
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,529 |
Bilstein shocks are great. Had a set on my 1 ton dodge diesel and it wasn't a bad ride at all. I think that most aftermarket shocks are an improvement over worn out stock shocks
I went with old man emu on my tundra as they were valved for use with the springs I put on it and it rides great That is a fact. Same for new OEM's...
Conduct is the best proof of character.
|
|
|
|
Joined: May 2001
Posts: 1,583
Campfire Regular
|
Campfire Regular
Joined: May 2001
Posts: 1,583 |
Just priced the Bilstein's, there not exactly givin them away... No, but they're good. That would be my choice.
220 Swift still king.
|
|
|
|
Joined: Dec 2010
Posts: 3,734
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2010
Posts: 3,734 |
I have had bilstein and the monroes, bilstein's are better, but not sure if the price difference is worth it. Either one will give you a better ride.
|
|
|
|
Joined: Sep 2007
Posts: 1,375
Campfire Regular
|
Campfire Regular
Joined: Sep 2007
Posts: 1,375 |
+1 I sold and used both brands for 15+ years either will cut the mustard. Just match the shock with the kind of driving/loads. You will be good to go. Put some new Monroe or KYB's on it. Not that hard, will be a definite improvement.
A vote is like a rifle; its usefulness depends upon the character of the user. Theodore Roosevelt
|
|
|
|
Joined: Oct 2006
Posts: 10,089
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Oct 2006
Posts: 10,089 |
I know the Bilstein 5100 is the preferred shock but which model Monroe is the best? And what is a KYB?
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Dec 2010
Posts: 3,734
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2010
Posts: 3,734 |
I know the Bilstein 5100 is the preferred shock but which model Monroe is the best? And what is a KYB? http://www.kyb.com/ another shock company
|
|
|
|
Joined: Dec 2010
Posts: 3,734
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2010
Posts: 3,734 |
I know the Bilstein 5100 is the preferred shock but which model Monroe is the best? And what is a KYB? Monroe's, depends how stiff a ride you want, I used the sensatrac
|
|
|
|
Joined: Oct 2010
Posts: 1,243
Campfire Regular
|
Campfire Regular
Joined: Oct 2010
Posts: 1,243 |
Can any rear shocks(coil overload spring around shock ?)help a slightly sag on 1 side of a 1995 f150 4x4 truck bed? Sag is less than 1".
|
|
|
|
Joined: Jan 2001
Posts: 21,317
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 21,317 |
Sags are a result of the springs failing, has nothing to do with the shock.
|
|
|
|
Joined: Dec 2010
Posts: 3,734
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2010
Posts: 3,734 |
Can any rear shocks(coil overload spring around shock ?)help a slightly sag on 1 side of a 1995 f150 4x4 truck bed? Sag is less than 1". It can, but the real fix is new springs.
|
|
|
|
Joined: Feb 2005
Posts: 6,293
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2005
Posts: 6,293 |
Can any rear shocks(coil overload spring around shock ?)help a slightly sag on 1 side of a 1995 f150 4x4 truck bed? Sag is less than 1". It can, but the real fix is new springs. And it puts a bunch of extra stress on the shock mount, which it was not really designed to take...
This is a shooting forum, there is no place here for logic.
|
|
|
|
Joined: Oct 2010
Posts: 1,243
Campfire Regular
|
Campfire Regular
Joined: Oct 2010
Posts: 1,243 |
Yep, springs must be a little weak on 1 side. Thanks for replies.
|
|
|
|
Joined: Apr 2011
Posts: 169
Campfire Member
|
Campfire Member
Joined: Apr 2011
Posts: 169 |
Yep, springs must be a little weak on 1 side. Thanks for replies. That or one of the leafs is broken. Not at all uncommon, especially on older high mileage trucks. If it's the main leaf it can become a major safety issue, too.
-Brian- Whatever you do, do well.
|
|
|
|
Joined: Jan 2006
Posts: 69,067
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2006
Posts: 69,067 |
Can any rear shocks(coil overload spring around shock ?)help a slightly sag on 1 side of a 1995 f150 4x4 truck bed? Sag is less than 1". The problem is that the shock mounts are made to dampen spring bounce. They aren't designed to carry weight. Overload shocks transfer weight from the springs to the shock mounts and they have been known to fail. To fix spring sag, you need overload springs, new springs, or maybe have your OEM springs re-arched. A good spring shop can do that and it's not all that expensive.
“In a time of deceit telling the truth is a revolutionary act.” ― George Orwell
It's not over when you lose. It's over when you quit.
|
|
|
|
Joined: May 2008
Posts: 3,667
Campfire Tracker
|
Campfire Tracker
Joined: May 2008
Posts: 3,667 |
My 2002 4wd Tahoe is still running the original shocks at 97,000 miles. Most of my driving is on paved roads and the ride and handling seem the same as always but I know they're not going to last forever. Does anyone know who the OEM is for those shocks? I'd probably get the same ones again unless there's something that would be a noticeable improvement.
Last edited by 43Shooter; 08/14/14.
|
|
|
|
Joined: Oct 2006
Posts: 2,519
Campfire Regular
|
Campfire Regular
Joined: Oct 2006
Posts: 2,519 |
|
|
|
|
Joined: Oct 2006
Posts: 2,519
Campfire Regular
|
Campfire Regular
Joined: Oct 2006
Posts: 2,519 |
is it worth it to spend the extra coin? Hell yes
|
|
|
|
Joined: Sep 2012
Posts: 8,729
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2012
Posts: 8,729 |
Can any rear shocks(coil overload spring around shock ?)help a slightly sag on 1 side of a 1995 f150 4x4 truck bed? Sag is less than 1". As others said, help yes, but can create other problems. One other suggestion would be to measure from the frame and take a good look at the bed mounts. May just need a new piece of rubber.
Sean
|
|
|
|
Joined: Mar 2005
Posts: 26,098
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2005
Posts: 26,098 |
Just priced the Bilstein's, there not exactly givin them away... There's Bilsteins and then there is everybody else. Not entirely sure on your Tahoe, but your body style (you still have the OBS style) with the Z71 package on pickups came with AC Delco shocks manufactured by Bilstein. The current Bilsteins that come the closest to the Z71 valving are the HD's for the front, and Comfort Ride in the rear. Casey
Casey
Not being married to any particular political party sure makes it a lot easier to look at the world more objectively... Having said that, MAGA.
|
|
|
471 members (1Longbow, 160user, 300jimmy, 10ring1, 1lesfox, 257 mag, 45 invisible),
2,168
guests, and
997
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,187,596
Posts18,398,160
Members73,815
|
Most Online11,491 Jul 7th, 2023
|
|
|
|