Home Forums Gear Free Classifieds Wood Stoves For Sale

Wood Stoves For Sale

I'm trying to make some room in my shop and have a few demo/prototype stoves I am clearing out.

First up is "The Beast" a 10.25" x 24" stainless steel roll-up stove. The stove ends have been on a stove that was burned a few times but are in excellent shape. The body, pot supports, turnbuckles, damper and spark arrestor are all new. It comes with an Ed T damper and collar as well as an Ed T spark collar and spark screen. This stove has a 4" pipe diameter and includes a 7' x 4" diameter roll-up stainless pipe with new pipe rings (pipe has been burned). It also has a bag for the ends and a plastic screw tube for the pipe and body. This stove sits 13" off the ground at stove top height.
The stove is 1980 cubic inches.
The stove weighs 2 lbs 12 oz, the damper and spark collar weighs 8 oz, the pipe and rings 1 lb 7 oz and the plastic tube is 10 oz. Total weight is 5 lbs 5 oz.
New this stove would cost $450+, I am asking $235 shipped to US address.





The second stove is the "Pig," a stainless cylinder, non collapsing stove, so there is no assembly time. The stove is 8.75" diameter and 8.75" long. It weighs 2 lbs 9 oz with damper/spark arrestor. The top sits 12" off the ground. It has an Ed T damper and collar as well as an Ed T spark collar and spark screen. It takes a 3" diameter pipe. No pipe or stove bag is included. I am asking $125 shipped to US address.





The third stove is the "Mini Cylinder," a stainless steel cylinder, non collapsing stove. This stove is 4" in diameter and 8.75" long. It weighs 15 oz with damper/spark arrestor. It comes with an Ed T damper and collar as well as an Ed T spark collar and spark screen. The top is 8 25" off the ground.
Pipe diameter is 2 9/16". No pipe or bag is included with this stove. I am asking $75 shipped to US address.






I'll have a couple more stoves in a few weeks, as soon as I get parts together.

If interested please PM or email to:

runsmtns59msn.com

Thanks,

Ed T

Bump. Is 2-9/16" pipe readily available or custom fab?

You can cut down12" shim stock to make the 2 9/16" or just wrap the 12" with more lap. Went with the 2 9/16" to keep the pipe hole smaller in the cylinder.

Got it. I am not a big outdoor stove guy being from the SE but I see the logic of keeping it small for efficiency. We generally hang out around 55 gal drums burning pallet wood after hunts and a 35 degree bag works on the cot or in the tent.

Morning bump

Ed Sent you a email about the Mini Cylinder.

The beast stove is sold.

Thanks

Prices reduced on the two remaining stoves.
$95 shipped for the Pig.
$55 shipped for the Mini.
Remember these both come with Ed T dampers and spark arresters.

Thanks

Hey Ed if you still have the pig stove I will take it.