|
|
Joined: Jan 2008
Posts: 4,219
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2008
Posts: 4,219 |
Forgot all about that. Got to eliminate all the possibilities. Although I've never had an issue evidently some have.
|
|
|
|
Joined: Sep 2006
Posts: 23,624
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,624 |
Great point. Should have thought about that myself, as I have his collet body die for bested cases. DF The collet die, above, is your solution assuming you have not lengthened the case, but are not sizing enough to push the shoulder back. MM
|
|
|
|
Joined: Dec 2006
Posts: 234
Campfire Member
|
Campfire Member
Joined: Dec 2006
Posts: 234 |
A last ditch fix might be, assuming the die is hitting the shell holder, would be to grind just a bit off the face of the shell holder to allow the case to go slightly deeper in to the die. I would then buy another shell holder and save the modified one for future problem cases.
|
|
|
|
Joined: Oct 2004
Posts: 4,340
Campfire Tracker
|
Campfire Tracker
Joined: Oct 2004
Posts: 4,340 |
This is where a $35 hornady head space measuring kit is worth twice the price. You can check brass before and after reszing. I've bought once fired brass many times only to find although it was once fired it was fired in more than one chamber. Belted mag chambers vary alot. Its either a situation of not getting the shoulder pushed back...or the swelling above the belt. You can usually see scratches in the case where it sticks if its just above the belt. Plus when they sticke because of swelling above the belt....they really stick....as in needing to be tapped out w/a cleaning rod.
|
|
|
|
525 members (1beaver_shooter, 17CalFan, 10ring1, 10gaugeman, 10gaugemag, 16penny, 60 invisible),
2,486
guests, and
1,150
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,166
Posts18,465,295
Members73,925
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|