|
Joined: Apr 2009
Posts: 4,331
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2009
Posts: 4,331 |
I'm getting very frustrated with finding rings. I've read that the Burris with the plastic inserts fit. I bought some, sure don't look like the fit to me, no matter which clamp I use. Anyone else have any luck? Can I see some pics of the rings guys are using?
|
|
|
|
Joined: Dec 2009
Posts: 3,187
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2009
Posts: 3,187 |
Which CZ model do you have? The Americans use standard 3/8" rings but the others use 11mm rings. I am assuming your problem is with the dovetail base clamp and not the fit of the scope in the rings.
Life is like a purple antelope on a field of tuna fish...
|
|
|
|
Joined: Dec 2011
Posts: 10,972
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2011
Posts: 10,972 |
Lots of folks use what you have and find them adequate. Here is another option that might offer a better fit. Folks use these in either 11mm or 3/8" depending on rifle model and the Burris Signature Zee rings which are Weaver bases. https://www.jnpgunsprings.com/product_info.php?cPath=10&products_id=247I've got Warne rings on mine but I'm not sure of the model or even if they still make them. Mine will adjust to fit either size rail.
|
|
|
|
Joined: Oct 2013
Posts: 2,264
Campfire Regular
|
Campfire Regular
Joined: Oct 2013
Posts: 2,264 |
ask slg888 stoney, He told me to get some from brownells, and they fit perfect. Just not sure which ones they were. Did you check with Talley/
|
|
|
|
Joined: Jan 2001
Posts: 2,762
Campfire Regular
|
Campfire Regular
Joined: Jan 2001
Posts: 2,762 |
I must confess, I was born at a very early age. --Groucho Marx
Patriotism is supporting your country all the time and your government when they deserve it. --Mark Twain
|
|
|
|
Joined: Apr 2009
Posts: 4,331
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2009
Posts: 4,331 |
I've got one American, one fs and anschutz
|
|
|
|
Joined: Nov 2013
Posts: 28,512
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2013
Posts: 28,512 |
Set your calipers to MM, measure the grooves, and then order Leupolds. I used mediums on my 453 for the 3-9 EFR. I think mine are 13 MM, but I'm old and forget stuff.
Some of those guys on RFC seem to think the more crap they can stick between the scope and the rifle, the better. I lean toward simple.
What fresh Hell is this?
|
|
|
|
Joined: Jan 2007
Posts: 11,369
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2007
Posts: 11,369 |
Millets have well on both types of recievers for me
|
|
|
|
Joined: Dec 2009
Posts: 3,187
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2009
Posts: 3,187 |
I have a set of 3/8" Leupold mediums I would sell for $40.00 shipped.
Life is like a purple antelope on a field of tuna fish...
|
|
|
|
Joined: May 2003
Posts: 584
Campfire Regular
|
Campfire Regular
Joined: May 2003
Posts: 584 |
I have a set of Warne 7.3/22 mediums that I used on a 452 Trainer that worked very well with a Nikon 3-9x40 scope. Would be great for your FS. Sold the Trainer. Will sell the Warne rings $30 shipped. They look new. Pics if needed
|
|
|
|
Joined: Feb 2001
Posts: 4,771
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2001
Posts: 4,771 |
Bought some B Square clamp-on Weaver style bases, problem solved on the 455. They clamped firmly on the metric dovetail, then installed Z rings on the bases.
If three or more people think you're a dimwit, chances are at least one of them is right.
|
|
|
|
Joined: Mar 2008
Posts: 1,265
Campfire Regular
|
Campfire Regular
Joined: Mar 2008
Posts: 1,265 |
I have a set of Warne 7.3/22 These..^^^^ I have a set on my 455 American using a Leupold VXII 3x9.
|
|
|
|
Joined: Mar 2011
Posts: 4,866
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,866 |
I used the 7.3 RINGS by Warne/Brownells on my CZ. They have double the hardware as the 7.3/22 and the clamp is strong enough to hold on a 795 (semi) and not slip. 7.3 RINGS
Last edited by 4th_point; 10/18/14.
|
|
|
|
Joined: Jan 2001
Posts: 58,107
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 58,107 |
I'm getting very frustrated with finding rings. I've read that the Burris with the plastic inserts fit. I bought some, sure don't look like the fit to me, no matter which clamp I use. Anyone else have any luck? Can I see some pics of the rings guys are using? Stay the pfuqq away from any/all rings that mount a dovetail,less recoil stop. Absolute dog schit way to affix glass. Do yourself some favors,schitcan that notion all together and do yourself some favors. Go DIP 25MOA extended 1913 rail,for both greater ring spacing and the much increased interface betwixt glass/receiver harmony. I've broken the dog schit CZ rings...the DIP isn't going any pfhuqqing where I do not wish. Hint. Annie 54 interface,if only to illustrate that the concept is well engineered,to stay the pfhuqq put. Understatement...as I flog on schit a smidge. Hint. CZ 452 interface. Between the rail and the copious erector latitude...750yds+ is a breeze to arrange. If/when you are mounting rings,less cross slots and directly to a dovetail,you are arranging a failure and to pay extry in order to coordinate same,is pretty pfhuqqing stupid as a minimum. Hint. Thank me later................. Addendum: DIP blows BKL outta the water,in both interface and mounting height,as well as ring spacing. Though the BKL cantilever 27MOA is handy,in certain applications. [img] http://img.photobucket.com/albums/v136/BigStick/Stuff/Rifle%20Stuff/IMG_1098.jpg[/img] Swapping stocks is a breeze,but DIP still steals the show. [img]http://imagizer.imageshack.us/v2/1280x1024q90/845/fxf6r.jpg[/img]I drive some Talley's on various Springers and they of course walk...because they are not slotted. Hint. [img] http://img.photobucket.com/albums/v136/BigStick/Stuff/Rifle%20Stuff/2R8G4642.jpg[/img] [img] http://img.photobucket.com/albums/v136/BigStick/Stuff/Rifle%20Stuff/MovingJunk.jpg[/img] I suggest taking notes and applying same. Hint................
Brad says: "Can't fault Rick for his pity letting you back on the fire... but pity it was and remains. Nothing more, nothing less. A sad little man in a sad little dream."
|
|
|
|
Joined: Aug 2007
Posts: 115,424
Campfire Sage
|
Campfire Sage
Joined: Aug 2007
Posts: 115,424 |
I agree with the man that took a healthy schit.
DIP is all my CZ's or Anschitz will be wearing.
Travis
Trump being classless,tasteless and clueless as usual. Sorry, trump is a no tax payin pile of shiit. My young wife decided to play the field and had moved several dudes into my house
|
|
|
|
Joined: Mar 2011
Posts: 4,866
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,866 |
Rimfire Technolgies used to make a rail for the CZ dove-tail. It was not as flexible as the DIP for ring spacing but used the same set screw pattern and was rock solid. The DIP is an improved version of the RT. When I had my CZ, I don't think DIP was even making rails. With either, the set screws bite well into the receiver and the design just works.
The RT rail replaced 7.3/Brownells rings on my CZ. The 7.3/Brownells are no lightweights though. You can crank the shhit out of the clamp hardware. I used them on 22lr mini-slide hammers (semi-autos) and they don't move. They come with recoil lugs so its simple to mill a recoil slot in the receiver (dove-tail). Small file works too.
Not sure about the regular version of the 7.3 though (called 7.3/22). Only one screw per clamp.
Last edited by 4th_point; 10/19/14.
|
|
|
|
Joined: Jun 2009
Posts: 1,532
Campfire Regular
|
Campfire Regular
Joined: Jun 2009
Posts: 1,532 |
Enjoy the hunt while it lasts!
|
|
|
Forums81
Topics1,187,588
Posts18,397,856
Members73,815
|
Most Online11,491 Jul 7th, 2023
|
|
|
|