Home Forums Hunting & Shooting Hunting Rifles Faux Show

Thinking about building a Faux Ti.

Looking for specs on rifles some of the other 'fire members have built.

Pics too...

Had one with a factory 260 barreled action in a Ti-style stock. The B&C stock shape did not work for me, especially the grip. It was a sweet little rifle otherwise. If I'd gone ahead and went with the Edge Mountain Rifle stock I originally wanted, I'd probably still have the rifle.

Built one with a SS .280 Remington Mountain Rifle action and barrel, bedded in a Ti stock, for one of my grandsons. Don't have any photos, but it works and he loves it.

It may be considered sacrilege, but a standard SPS-SS chopped to the right barrel length and put in the MR pattern Edge would be the way I'd go today if doing something along those lines again. The KS contour would likely also suffice. Or just buy a Montana if wanting to go lighter.

260, M8 6x42 CDS, Talley's, yada, yada, yada....wouldn't do CDS again. 6#12oz

Posted this one before. Its my 1st "faux Ti".
Gander Mtn Guide rifle in .243. Stock painted & bedded by Eddie Fosnaugh. Bolt flute by Karl @ Kampfeld Customs. Don't use this one much but its a nice shooter and a handy little rifle.

What barrel contours are you guys using?

.204 Ti Takeoff converted to BDL



.223 Ti Takeoff converted to BDL




.223AI B&C Ti ...BDL





.223AI B&C Ti BDL ( Different one....dont ask...)

cm action, takeoff mountain ss barrel in 30-06, flip-flop recoil pad, talleys and a 6x36 leupold weighs a touch under 6lb 9oz. Less a couple ounces with the 4x33 it currently wears.

The Gander Mtn Guide rifle have a Remington Mtn rifle contour which is pretty skinny. But I think someone mentioned even dropping a SPS into a Ti stock makes for a nice faux:)

I guess this qualifies as a faux Ti?? Its a KS .280 with a Ti bolt flute, so technically its a faux Ti right?

Frank I wish you wouldn't have posted a pic of that I almost forgot about that dang rifle

Faux 7-08�.. 6lb-11oz
21" Pac Nor pipe
Leupold 2.5-8

Forgot one: .223 B&C Ti BDL

Forgot this one. 7MM-08, although it might not be a "faux" -grin

700 ADL 30-06
Bolt and bolt handle fluted by me
1st Gen Ti stock painted by me
Leupold VX3 3.5x10x40
Leupold dual dovetail

XCRII .375 RUM in an AK Ti stock



not sure what this started life as, probably an SPS, but also a .375 RUM in an AK Ti stock

7/08

308 SPS.

Started life as a Gander Mtn SS Guide, .308. Tripped the Ti stock for an Edge, added Talley's and a Leupold 2.5-8 , liberally applied the Krylon, and called it good. I've owned Ti's, this is better.

tedhorn,
Are you using a pile of elephant poop for a gun rest in that last picture?