|
|
|
|
Joined: Jan 2008
Posts: 15,746
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jan 2008
Posts: 15,746 |
Wondering if its doable. Cut off threads and rechamber?
|
|
|
|
|
Joined: Aug 2009
Posts: 9,919
Campfire Outfitter
|
|
Campfire Outfitter
Joined: Aug 2009
Posts: 9,919 |
Not going to have much to work with
|
|
|
|
|
Joined: Jun 2004
Posts: 7,170
Campfire Tracker
|
|
Campfire Tracker
Joined: Jun 2004
Posts: 7,170 |
I would turn the Mauser barrel tenon down to 7/8 inch and thread it to 24tpi vee. I would then install a sleeve which would be loctited in place and threaded to fit the Springfield. The sleeve would have the coned breech built into it and the headspace would be set via the location of the shoulder. It's a bit of work but works out OK. GD
|
|
|
|
|
Joined: Dec 2007
Posts: 1,523
Campfire Regular
|
|
Campfire Regular
Joined: Dec 2007
Posts: 1,523 |
I would turn the Mauser barrel tenon down to 7/8 inch and thread it to 24tpi vee. I would then install a sleeve which would be loctited in place and threaded to fit the Springfield. The sleeve would have the coned breech built into it and the headspace would be set via the location of the shoulder. It's a bit of work but works out OK. GD My friend did something similar in adapting a take off M70 .243 barrel to a Mauser he had laying around. It's been a good rifle for him.
|
|
|
|
|
711 members (12344mag, 10gaugemag, 06hunter59, 1234, 10Glocks, 10ring1, 69 invisible),
3,453
guests, and
1,175
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums81
Topics1,191,271
Posts18,467,354
Members73,925
| |
Most Online11,491
Jul 7th, 2023
|
|
|
|
|
|
