Home Forums Hunting & Shooting Handguns loads for a'9mm

My Beretta 92 also leaves a ring around the fired primer pin mark. It is an extra large pin hole, very common on the 92's.

Any chance you can load a picture of one of your cases

I don't currently have any, it's been awhile since I have taken it to the range. Just do a Google search for "Beretta over sized firing pin hole" should be a lot of stories about it.

mhFrank, you might be able to save yourself a ride to your gunnie by showing a couple pics of the fired cases with primer pockets showing.
Just a suggestion.

At this time I am using a tablet and can not add pictures with it I did like Scott suggested and Google it, there are some picture there showing the same rings that I am getting , from some treads I have been reading it is normal for this pistol ,I have loaded down and my pistol won't cycle properly.
I think I will take a ride today and visits my GS he is getting old and I enjoy just talking with him a few guys on here know him and would do the same if they had the time. Ed Landers is a guru of guns he has been there and done that Ed is a true gun smith not just a bolt on a new part and guess and hope .
I will get back after my visit and post what he suggests

Well after a ride up the ,mountain to visit Ed ,I showed him a few fired cases and he said that they looked normal ,he checked the head space and did a good all around inspection and told me it all check out head space was tight and for the year and amount off shooting I do it is in real good condition
Thanks for all the feed back on this issue better safe then sorry