Home Forums Hunting & Shooting Hunting Rifles This year's rifle projects

It seems that some of us do at least one thing to a rifle each year. Here's mine.

1) Win 70 get's a edge stock

2) Encore get's a 204 ruger barrel.

Spot

I'll be getting a 700 SA built in 25-284 with a Rick Bin stock.
Looking for a donor action now.

Don

I'll be dropping my Remington 700BDL .30-06 Barreled action into an HS Precision stock. It's unnecessary, but I like the way the green spider web finish looks.

I'm finishing up my .45-70 Guide Gun project right now.

deciding between xs sight package and 4x33 leup with heavy duplex for my remmie adl (anybody got a good used one in matte mufti?). hoping to rebarrel my m96 sporter, too.

Where to begin:
Mickey Coleman is building me a 223
Rem 600 reworked
Lilja #3, 8 twist, 22"
McM MR stock, ADL, 60%burgundy, 40%black
D&D is going to Build a 338Fed
Rem 600 reworked
Rock #3, 10tw, 22"
McM Classic, 40%od, 40%black, 20% woodland beige
D&D build 257 Bob
Rem 700SA reworked
Pacnor #1, 10tw, 22"
McM MR, ADL, GAP Camo
Stu Satterlee is finishing off a 1910 Mex Mauser and a blank of straight grained english is getting turned
And I'm stuck here in Egypt and won't be able to play until November

I have a few in the works...

Have a 700 action thats going to get a Shilen 280ai mountain rifle tube screwed on it, going in original mountain rifle wood stock, cutting it off so it fights my wife, install recoil pad, find bottome metal and strip and refinish old stock as its 'turned' hazey.

Have to refinish an old M70 featherweight stock that was cut off and bedded to a 325WSM... again for the wife. Its about half done, just need to stain and apply finish

Going to drop my pre-64 338-06 into a new stock of some sort... not sure yet, might do surgery on a new featherweight stock... or go with a Micky...

I need to get sights installed on a new muzzy.

Lastly... need to have some work done on a mauser chambered in 35 Brown/whelen. She has a feeding hicup at the moment. Will only feed off one side.

only thing that's possibly in the works for me this year, is to start building my 3 year old son his first centerfire ... fast twist .223AI on an m700 action ... will work up the details as it happens, but have a good idea so far what it's gonna be ...

as for me, I'm good to go right now with what I have, even though there are plenty of projects that would interest me ... I just feel like I need to get this rifle for my son out of the way before I move on to adding "unnecessary" rifles to my battery ... (grin)

I have a brown precision kevlar stock for a tang safety Ruger M77 laying around just crying for a barreled action to go in it, I'm thinking 280 AI 24" #1.5 contour fluted from ER Shaw. topped with a 2.5 X 8 Leupold.

358 STA with a RKS gain twist barrel on a L-61-R Sako action.Maybe a Mickey stock for my 7mm undecided will talk more with Steely about it anyhow.

I have a 700 ADL action, McMillan blue/gray/black mountain rifle stock, steel ADL guard, Pac-nor #2 25-284 barrel, Holland lug, Leupold DD lows,and a 3.5-10 PR Leupold waiting to be assembled.

I have a McMillan Classic (dk gray/lt gray/black) coming for the .300 SAUM BDL SS. Probably going to bob it back to 22 inches. A FXIII 6x42 will be going out for an M1 turret and riding in the signature dual dovetail rings.

I have a McMillan in black for the Old Man's 77 Ruger. Will try to get him to kick in a little for a new #3 SS Pac-nor in 7mm Rem Mag.

Also either going to build a 10/22 or buy a CZ 452 or Rem 504.

Replacing the 8x57 barrel on my Yugo with a 6.5x55, to make a deer/pronghorn gun for my son in law, and his sons who can't wait to be old enough to carry a gun in the hunt.

I want to either build or buy a light weight mountain gun for sheep and goat hunting. Looking at a short action chambering in either, 257 WBY, 260 Rem or 7mm-08. Will put a Leupold 6X fixed scope on it, Vero Vellini sling and if it's a build I'll use a McMillan stock. If I buy a factory rifle it will be a Kimber Montana in one of the above calibers less the 257 WBY.

Finish up Ol' Fugly my 03 Springfield. Funds permitting a .223 AI and/or possibly .2-6MM or .22-06, and a .250 Savage AI may also be in the mix.

HBB

1. JC Higgins M50 270. Paid $280 and it will be a loner. So far its already shooting 1.25 moa with a 2-7 VX1 in Weaver Extensions. Am having a problem finding a rear base as it has .86" spacing there. May go with different height rings but they need to be ordered. The trigger is six pounds so that needs some work. Other than the above it will stay original.

2. M88 Pre 64 308. It shoots 3 moa now. The crown looks strange with very sharp edges. I may photo it and then cut it and shoot it again. Wish I had not paid so much at $525. I just wanted one but now that I have handled it the thrill is gone.

3. Still hoping for Weaver bases for Kimbers.

4. Thinking of a Savage switch barrel project.

Higgins M50 for $280? Dang good deal!

Maybe you were involved in the debate about the stock triggers on those. My opinion is that they are inherently dangerous. You may want to think about putting a Timney in. That will be safer, and sort of 2 1/2 poundish.

1. .308 Marlin XLR

Next year...

1. .375 Ruger

Contemplating . . .

Tikka LH stainless 223 or 243 (or both--maybe).

Remmy 7600 30-06 just for Kicks . . . (maybe).

S&W 617 22LR for practice . . .

For Sure:

Single Shot "trainer" 22 for my boy's 7th B-day (C-Z, Henry, Marlin, Chipmunk?).

BMT

BMT

I've got both a 257 WBY and 270 WBY on Model 70 actions in the works. Will be converting a couple of Remington KS Mtn Rifle stocks to use on the projects. They should both be done within a couple months.

just sent off a check for an 8 twist, #3 Broughton to do another 223AI. Specs yet to be determined.

Got this 416 Rigby due to be done sometime in August:




If I can find the right action, I will be starting a 257 Roberts using this blank:

CAS,

That's beautiful wood. Do you do your own stockmaking? Thanks...Bill.

Attempting it, but not on these blanks.

I have a couple of cheap black walnut sticks I am whittling to learn.