have you loaded the 190 accubond in 30-06 ? what load did you like? what velocity did you achieve?

A little different critter. It was the 190 Hornady btsp in a 22 inch Winchester 670 a few years ago.

11-21-1995 50 degrees ambient 30-06 190 Hornady btsp

63 gr H4831 2681 fps

64 gr H4831 2775 fps

65 gr H4831 2816 fps

I used the 63 gr load for a couple years. Two boxes of bullets at 100 each. It gave very good accuracy. The rifle darn near killed on both ends.

I also tried IMR 4831. It started showing pressure signs as it approached 2800 fps. H4831 was much more forgiving.

Nosler makes any great bullet

He must have been channeling the Slavek personality when posting this one. He has more channels than Sally Field as Sybil.

You got a million of em don’t ya ? You can only use them here with your goofy ass audience, dope. Little bit of knowledge swelled your head big enough to cause an eclipse. You’re a bigger f a g than the Feral.

With H4831sc, they were a little over 2700fps with hodgdon book max, this is in a 24" barrel. I loaded them to a little over 3.4".

Mine 20" barrel SAKO likes:
Reloder 16 - 2600 fps
H4350 and Hunter - 2700 fps
Reloder 26 - 2740 fps

did you use lapua or norma brass. thank you for your experience and information. Ron

thank you wswolf. Ron

thank stratton. Ron

This was in Remington Nickel plated brass purchased in '93 or '94. And I failed to mention the primer: CCI 250