Home
Posted By: TeamRealtreeHD 7mm08, Varget + 140's - 09/26/11
Started playing with a Remington Model 7 in 7mm08. Having good luck with Varget and 140's, with CCI 200's.

Worked up to 43 grains with great accuracy.

Anybody else using Varget with 140's?
Posted By: slg888 Re: 7mm08, Varget + 140's - 09/27/11
7mm-08 & Varget work well together.
Posted By: gorskij Re: 7mm08, Varget + 140's - 09/27/11
Ive loaded 40.5grs up to 41.5 with 139 Hornady FB & SSTs. Very good accuracy.
Posted By: fremont Re: 7mm08, Varget + 140's - 09/27/11
Yeah, I've used that combo before.... wink

[Linked Image]
Posted By: Fire Hawk Re: 7mm08, Varget + 140's - 09/27/11
42 grains and 140 Btips, 140 Sierra Boattails, 139 Hornady SP, and 140 Accubonds. All of these will hold less than MOA in my 7mm08. I like Varget. Keeps my life a little more simple, and simple is good.

FH
Posted By: 65BR Re: 7mm08, Varget + 140's - 09/27/11
Good shooting freemont.

140 and Varget was a staple in mine. Ran 45 gr which was safe in MY guns, about 1 gr over book max IIRC. Primers flat no sticky extraction. Dropping back to 43 won't change anything but POA/POI by a smidgen.

An M7 has a 18.5 or 20" bbl so another couple of grains of powder likely won't give much more speed.

Posted By: Mad_Mikee Re: 7mm08, Varget + 140's - 09/27/11
Im shooting 140 accubonds with Varget out of my 7mm-08
Posted By: ColdBore Re: 7mm08, Varget + 140's - 09/27/11
Originally Posted by slg888
7mm-08 & Varget & 140 gr Ballistic Tips work well together.


Completed the equation for you.

Mine shoots the above combo extremely well. smile
Posted By: jstall Re: 7mm08, Varget + 140's - 09/28/11
Originally Posted by Mad_Mikee
Im shooting 140 accubonds with Varget out of my 7mm-08
Me too! Great combo.
Posted By: WoodsStalker Re: 7mm08, Varget + 140's - 09/28/11
++1
Posted By: Azshooter Re: 7mm08, Varget + 140's - 09/28/11
If you are don't get results you like with Varger I recommend you give RL-17 a try. I will give you higher velocities than the other powders useful in this case. The concensus here on the fire is that you can use H4350 as a guide for starting amounts if it isn't mentioned in alliant's data then work up from there.

I have a 284 win that is awesome with this powder. It is moving a moly coated 160 accubond at 3070 from a 23" barrel! Tried it in a 6mm rem and 100 nos pt super accurate load vel 3300. My 338 RCM likes it too, 225 accubond @ 2750. It works well in many midsized cases. RL-17 is the new wave of rifle powders with a very long burning curve.
Posted By: MontanaMan Re: 7mm08, Varget + 140's - 09/29/11
Varget is pretty good in my 7-08 w/140's but overall I like H-4350 a bit better.

MM
Posted By: ldholton Re: 7mm08, Varget + 140's - 09/29/11
run the same in a mod. 7 with 20in. barrel but with 42 gr varget
Posted By: acooper1983 Re: 7mm08, Varget + 140's - 09/29/11
mine hates varget with 140 tsx/s put some h380 with 140 tsx/s and it shoots less than half inch
Posted By: KLM Re: 7mm08, Varget + 140's - 10/04/11
Ditto on the 43 grains of Varget in 7-08 with NBT, NAB, Hornday IL. Both rifles also like a max load of Ramshot Big game.
Posted By: MtnBoomer Re: 7mm08, Varget + 140's - 10/05/11
20" Model Seven, handy lil' rifle.

43.5gr Varget, WLR and Hornady 139s at 2.800" COAL getting 2780ish. Trifectas generally 0.7"-1.0"

Posted By: tedthorn Re: 7mm08, Varget + 140's - 10/05/11
I get 2840 with 42 1/2 grns of Varget and 140 grn Accubonds...love em!
Posted By: passport Re: 7mm08, Varget + 140's - 10/05/11
Im playing with Varget and some 140 VLD's and seems the hotter I run em the tighter the group. Was getting a flyer, odd for this gun, but 43 grns fixed that. I assume it due to not getting close enough to the lands, 2.800 is about .075 off....

[Linked Image]
Posted By: Jason280 Re: 7mm08, Varget + 140's - 10/06/11
I haven't had a chance to try Varget, but I have had great results with 140 BTs over 44gr IMR4350. I haven't had a chance to chrono the load, but it will put 5-shots into under 3/4".
© 24hourcampfire