Hybrid 100V?...... - 24hourcampfire

Have any of you ran this powder yet?

I haven't tried it, but the data seems nice.

Thanks,

loder

I've tried it in a few cartridges and at around 70 degrees got the velocities they list, with good to great accuracy. But it isn't one of Hodgdon's Extreme line, and is pretty temperature-sensitive.

I'm shooting it in a 6-284 Stiller, and a Cooper 6.5-284. 95 VLD's in the 6-284 and 130 VLD's in the 6.5. Good velocity in both, very good accuracy and it flows through powder measures very consistantly. I haven't tried it in any others but I am happy with it in the X-284's

Thanks guys.

6mm, I may give it a run in my 6-06 and 6.5-06, nearly identical capacity as your 284s. Sounds like it will work on the 06 case as well. Have you ran it against R17?

I have not tried RL 17. I'm happy with the Hybrid so I think I'll just stay with it

Loader,

I asked a similar question a few months back about my 25-06. Got a few responses. Maybe they can help you too.

https://www.24hourcampfire.com/ubbth...yone_Use_Hybrid_100V_Powder_#Post6302279

I am almost onboard in trying that powder, but I keep tossing back and forth on what bullet to use.

Good luck and if you do try it, let us know how it works for you.

Kique

Originally Posted by Mule Deer

I've tried it in a few cartridges and at around 70 degrees got the velocities they list, with good to great accuracy. But it isn't one of Hodgdon's Extreme line, and is pretty temperature-sensitive.

Damn. I wish I'd read this yesterday. Probably wouldn't have loaded up all those rounds with H100V last night!

Thanks guys.

Turned my 6mm into a real good shooting gun with 95 NBT's. Went from an OK shooting gun to one I would be hard pressed to get rid of. Velocity is running 3215 from a 22" barrel.

That aint bad at all, Thanks Hawk.

It matches the velocities and gives good accuracy in my .416 rigby, 400 gr. Hornady. Shows promise in .348AI, too.

Originally Posted by Mule Deer

...isn't one of Hodgdon's Extreme line, and is pretty temperature-sensitive.

Is this from experience? Is this a nitro based powder? This is the only stuff that is in stock locally and I'm out of this burn rate. Hmm.

I have used it with very good success in my .257 remington with 100 grain TTSX. As to being temperature sensitive, I saw no discernible change in accuracy when shooting the max. load at 70 degrees and the same load at 28 degrees.

Anybody else experimented with temperature sensitivity?