Found some 4320 and went all in.

Give me your best loads for .308 , 30-06, and 243 if anybody has used 4320 for them…

As a side note, at Cableas yesterday they has a keg of H4350 and a keg of Varget. 200.00 each!! No thanks...

Never understood why 4320 is not more popular. Burn rate is such that it has wide application.

I have a 243 FWT that won't shot anything very well except some old 100gr Solid Bases with 4320...and it loves that combo.

Yeah s.Texas...I had a 7x57 that liked it too w/139 BTSP. Almost gave up till I remembered O'Connor had used it in one of his 7x57's. powdr

You too, powdr? I have a 7x57 that would not shoot a Barnes bullet at all with several powders tried, but it shoots the 140 gr TSX with IMR 4320.

Sorry, hope I did not hijack this thread.

I don't get it. 25 bucks a pound for H4350 or Varget is too expensive?? It is less than buying over the net and paying shipping and hazmat.

That said 4320 works fine in my 308 but I have not used it in the 06 or 243.

I would have to dig out my load book for the load but I know my .243 really likes IMR4320 with 62gr varmint grenades. I have yet to try it with any of the 80+ grain bullets though.

It's my go to for 150's in 308 and 30-06. I've used it with 180's in the -06 also but generally go to IMR4831. It sure meters nice.

Recently picked up a couple of pounds of it at Bi Mart for $23.50 per pound...