Any leads on 25 Krag or 6mm Krag reload stuff is needed.
I need brass , dies and case forming dies.
Thanks

Got. If nothing else P.O. Ackley's Book has loads but be careful with them. If it/they were mine I would start w/ a 6mm REM FL die to finish neck, remember they will, originally headspace on the rim and seal at the case mouth. So anything in between is generally no problem (dia, shoulder ect.) as long as they chamber. For the 25 I would try to get a 257 Bob FL die and do the same. You will most probably have to neck ream/turn at some point for either one no matter what dies you have though. Call C&H dies they may have sets on the shelf. I had to do MOL the same thing w/a 25 Ackley Magnum (essentially a shorter necked down 7mm mag and I use a short 257 Wby Mag FL die). Good luck!-Mu

Thanks, I have a call in to CH on the dies and just missed a set on ebay a few days ago.