I have four Bergara 6.5 PRC barrels for sale. They're short chambered for the 6.5 PRC cartridge, have a 1:8 twist, are made of 416R stainless and have no exterior markings other than the letter B in the extractor clearance cut. These barrels have the same profile as the 8400 WSM Montana/Mountain Ascent barrels so will drop into a Montana/Mountain Ascent stock. The 6.5 PRC cartridge fits in the 8400 WSM magazine (3.030") without any issues and the following bullets will touch the lands with the COALs shown (assuming finished chamber is close to minimum SAAMI dimensions).

Nosler 142gr ABLR - COL of 3.020" - bullet ogive into lands
Hornady 143gr ELD-X - COL of 3.000" - bullet ogive into lands
Hornady 147gr ELD Match - COL of 3.020" - bullet ogive into lands

Asking $210 each shipped to lower 48 states.

Barrel #1 - 24"
Barrel #2 - 22"
Barrel #3 - 22"
Barrel #4 - 20" with 7/16"-28 threads on muzzle (will include a Kimber thread protector, Kimber brake available for $50)

BTT

Update: I completely forgot that I ordered barrel #4 with 1/2"-28 muzzle threads to increase wall thickness and make use of standard brakes, suppressor adapters, thread protectors etc. I apologize for the confusion.

BTT. Still available.

did you ever sell the 24"? Seems like a good alternative to my 270 wsm 1:10.

I apologize for the delay. I still have the 24" barrel. PM me if interested ... or better yet send an email to the address in my signature.

Thanks.