Home
Updated from earlier November post & reduced price

I'm listing for a good friend the following:
Hill Country built 35 Whelen using Sako 75 Finnlight

Hill Country Custom Rifle:
Built on a professionally blueprinted action with a McMillan synthetic stock with Pachmayr decelerator recoil pad & Uncle Mike�s sling swivel studs, and a match grade barrel to which we have performed a complete barrel break-in.
Complete accurizing service includes a professionally tuned trigger, correctly mounted scope, recrown, and our Pillar Bedding System with �� 3-shot group guarantee with recommended factory ammo.

McMillan Fiberglass Stock: Sako Classic, right hand, 50% olive, 30% gray, 20% black
Lilja Barrel: stainless, 1:12 twist, #5 Contour, 22�
Teflon: Grey finish on floorplate & clip

Weight of gun, excluding scope mounts: 7 lbs 10.2 oz.
Besides break in by Hill Country, owner has fired maybe � box of shells.
New sako Finnlight and Hill Country work total over $3,000.00
Gun has been hunted one time (shot nice Michigan UP buck!)
Sako does have Optilock.
Original Sako stock & barrel not available.
Set of Warne rings, medium, matte finish, included.

$1,400.00 delivered.

Please email me at KevWaMitch@hotmail.com for more information.
Thanks, Kevin
[img]http://render2.snapfish.com/render2/is=Yup6aQQ%7C%3Dup6%3DzqH%3AxxqUD7qRUrKxzX7BHpUUKxgXP0Q%3F87KR6xqpxQQeaxo0Qx0anxv8uOc5xQQQonnPnnlGoQqpfVtB%3F*KUp7BHSHqqy7XH6gXP0Q%7CRup6lQQ%7C/of=50,590,442[/img]
[img]http://render2.snapfish.com/render2/is=Yup6aQQ%7C%3Dup6%3DzqH%3AxxqUD7qRUrKxzX7BHpUUKxgXPJJ%3F87KR6xqpxQQeaxo0Qx0anxv8uOc5xQQQonnPnnlGPaqpfVtB%3F*KUp7BHSHqqy7XH6gXPJJ%7CRup6lQQ%7C/of=50,590,442[/img]
[img]http://render2.snapfish.com/render2/is=Yup6aQQ%7C%3Dup6%3DzqH%3AxxqUD7qRUrKxzX7BHpUUKxgXP0e%3F87KR6xqpxQQeaxo0Qx0anxv8uOc5xQQQonnPnnlGPnqpfVtB%3F*KUp7BHSHqqy7XH6gXP0e%7CRup6lQQ%7C/of=50,590,442[/img]
[img]http://render2.snapfish.com/render2/is=Yup6aQQ%7C%3Dup6%3DzqH%3AxxqUD7qRUrKxzX7BHpUUKxgXPJo%3F87KR6xqpxQQeaxo0Qx0anxv8uOc5xQQQonnPnnlGoPqpfVtB%3F*KUp7BHSHqqy7XH6gXPJo%7CRup6lQQ%7C/of=50,590,442[/img]
[img]http://render2.snapfish.com/render2/is=Yup6aQQ%7C%3Dup6%3DzqH%3AxxqUD7qRUrKxzX7BHpUUKxgXP0o%3F87KR6xqpxQQeaxo0Qx0anxv8uOc5xQQQonnPnnlGo0qpfVtB%3F*KUp7BHSHqqy7XH6gXP0o%7CRup6lQQ%7C/of=50,590,442[/img]
Sorry, photos didn't work as planned.
If you copy the link, they should open as a web page.

Thanks, Kevin
deleted
PM sent.
Bump

Thanks, Kevin
What's the length of pull (LOP) on the stock? You don't have to measure - if it was custom fitted, your friend should know (at least approximately) what it is, otherwise it would be the standard LOP.
The Hill Country invoice says 13.5" LOP

Kevin
Kevin, I spoke with Denny last night and am going to meet him during the week.

Bill
where are the pics??? have a rifle built by hill country now, am interested if you haven't sold yet.
jeff
lektric@msn.com
Sent you an email this morning. I'll buy it.
Sold Pending Funds to:
Quadzilla

Thanks to all, Kevin
© 24hourcampfire