Looks like there is enough interest to make some more of these. How many folks would like a set - please don't say you want them if you're not seriously interested in them. I don't want to have a bunch leftover due to people backing out.

Just respond with how many sets you want.

$175 per set

30mm

These are right at about .050" lower than low Talleys, front ring is extended about 1/4"

I would address the "backing out" issue with a deposit.
Good looking rings.

Price?

Are they steel or AL? Do they fit a NULA?

Former; no.

They are incredibly well made.

Tag

I'm in for 1 pair.

I could, but I like to work on them as I have time/feel like working on them. If I take a deposit then I have to deal with guys bitching if I don't get them done right away.


$175


300 series stainless - Don't have a NULA, so unless it is the same diameter & hole spacing as the Fieldcraft, no.

I’m still in for a set.

Love these rings.

I'm in for 1 set.

My son and I are in for 4 sets.

I want 2 more sets.

I have several sets, and these are THE best ring sets for the Fieldcraft.

Could any of you who already have them post pics of them with scopes mounted? Thanks.

Any chance the base of that front ring could extend back a little further to catch the third screw?

Chris and I spoke one time about the possibility of bases. I don’t know if this would be the correct time to inquire again, but if there was enough interest …

He does amazing work, and these are a huge value for what he charges.

Thanks for the picture, especially since it is the same scopes as I have on mine. It looks like the mounts end up in about the same place as the rings on my rails. Here's a thread in which JCMCUBIC posts some other mounts for comparison of heights: https://www.24hourcampfire.com/ubbt...ount-for-barrett-fieldcraft#Post13468972

If I did the math right, these custom mounts would be about 0.23" lower than a rail and low rings.

Chris- when do you need to finalize your order list?

It could be done, but it's gonna cost more $$, longer material, end mills, run time. Just TIG them to the receiver & you don't have to worry about it

Probably end of next week I'll total up how sets & get some quotes for material.

I'll likely make a few extras - always seems to be some stragglers that come looking after I get them finished.

Pick your poison... either noisy customers OR potential $$ loses.

I may be guilty. But it was only because I was so impressed with the first set!

Curious do you think these fit with the nxs 2.5-10x42?
Whats the benefit over the tally lows?strength

Yes and yes.

Add one more to mine for a total of 2 pair. I'd rather spend the $ and get another pair incase another FC shows up than to have another FC show up and risk not having a set for it.

Thanks for doing another run Chris.

I'll take 2 sets. Thank you.

Whats the weight difference compared to the talleys?sure its not much but just curious.

Sorry, nor enough posts here (yet). I'd like two sets, how may I contact you? I'm on RS the hack. Thanks for the consideration!

Actually, I'm in for 3 sets if it's possible.

Chris84,
I would like 3 sets please.

Bruce

Chris84,
I would like 3 sets please.

Bruce

Bruce - is that 3 sets or 6 sets? 🤣

Chris; I’m in for another set.

Any possibility of doing some steel bases?

Possibly?

Gonna be awhile, with the rings, more TI handles for the Kimbers & some projects for myself, I'm not sure when I'd get to it

Chris & AKwolverine,
I only need 3 sets at this time. I apologize for the double post.

Bruce

I know you've got a full plate...price you pay for making some great pieces!

I'll take a set. Sending a PM.

Blessing & a curse.

I'm going to close this now - if you're after this you are too late.

Sorry to pester. Still too new to the site to DM.

Matt

I'm just starting to make them, it will be a month or two before they are ready to ship out.

I will take a set. PM incoming.

I got them mounted and they are excellent. Thank you, Chris.

Glad to hear you like them.

I have a few extra sets if anyone would still like to get some.

Hi Chris,

I signed up for this forum to see if you had any sets still available. If so, I’d love to purchase one. I can’t PM due to my lack of posts, but if you could email me at [email protected], I’d love to proceed.

Thank you,

Same question AND what else are you working on?

Have two sets of your rings now, and would love to see what else you can turn out.