Home
Rem 700 chambered in .300/221 Whisper by the late Mickey Coleman
16.75" Krieger 1:8" twist barrel threaded for a suppressor. Varmint Special barrel contour.
PTG firing pin assembly, BDL bottom metal, Hogue stock.
I have lots of Lapua 221 FB brass, (I'll post up a total)
Rifle has been fired 275-300 times. Just lost interest over the years.
Fun gun to shoot that would be great for deer and pigs <125 yds.
No dies. Hornady sells a set for $45 300 BO / 300 Whisper
I mainly shot the heavies 220 gr at 100 yds. Killed a half-dozen deer and pigs in Texas.
Trigger was tuned by Mickey, rifle as pictured weighs around 8 lbs. (I'll dbl-check)
I haven't shot this rifle in over 10 yrs and it's time for someone else to have fun with it.

PM me with any questions

$875 plus shipping.

[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
I told my wife I would be good and here you come! Please Pm your best price and trades you might care for. 🌝
What is thread on the muzzle?
I have dies listed on eBay if that helps you get a potential buyer!

https://www.ebay.com/itm/2257456347...r=&widget_ver=artemis&media=COPY
Brain - I’ll pm you today once I count all the brass , it’s close to 250 pcs.

21black - 5/8x24 thread

Aggie - thx brother
Sweet rifle.

GLWS
brain - PM sent with more details


here are the other items I have ..... ALL brass is included with the rifle purchase


(92 pcs) Lapua Match 221 FB - 1x fired .300 Whisper
(34 pcs) RP 221 FB - 1x fired .300 Whisper
(160 pcs) WCC (Winchester brass) sized, formed, 1x fired for .300 Blackout
1 - dummy round used to seat bullets - FREE

286 pcs of brass are included with the rifle.

I also have the following: If the buyer does not buy them, I'll relist my ad


1 - Sheridan Engineering 300 BO ammo gauge New In Box, never used paid $63 , selling price $50
1 - custom .300 BO cut off jig New In Box, never used paid $25 , selling $20
1 - Harbor Freight cut off saw , to be used with the jig New In Box, never used paid $35 , selling $30


I also have approximately 475+ Sierra 30 cal. 220gr. HPBT Match bullets , paid $300 , selling for $245.
PM's replied to .... bullets will be made available should the buyer decide to pass
Bump
price drop $850 and split shipping to L48

with the 286 pcs of brass, buyer will be set for awhile.
PM's answered

this rifle feeds and cycles as a repeater , no problem with ejecting spent rds.

stupid quiet with a suppressor and subs
Bump
.
bump
bump
more PM's answered , here are pics of the other items FS with this 300 Whisper

Included with rifle

(92 pcs) Lapua Match 221 FB - 1x fired .300 Whisper
(34 pcs) RP 221 FB - 1x fired .300 Whisper
(160 pcs) WCC (Winchester brass) sized, formed, 1x fired for .300 Blackout
1 - dummy round used to seat bullets - FREE

286 pcs of brass are included with the rifle.

I also have the following items for sale:

1 - Sheridan Engineering 300 BO ammo gauge New In Box, never used paid $63 , selling price $50
1 - custom .300 BO cut off jig New In Box, never used paid $25 , selling $20
1 - Harbor Freight cut off saw , to be used with the jig New In Box, never used paid $35 , selling $30

Basically this is a turn key package , and ready to shoot with brass, and other items.

I do not have a set of 300 Whisper dies, Hornady sells a set of 300 BO/ 300 Whisper reloading dies for $45 - $50. The Wilson bullet seater pictured below will work to seat bullets. Then all you would need is a FL forming die with a decapper ... probably $25-$30 from LEE, RCBS, Hornady


I also have approximately 475+ Sierra 30 cal. 220gr. HPBT Match bullets , paid $300 , selling for $245.


[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]
[Linked Image from photos.imageevent.com]

Mini saw has never been used, .... $30
this along with the jig would be used to trim cut 223/5.56 brass to size for forming
[Linked Image from photos.imageevent.com]

never used cut off jig $20
and a BNIB , never used Wilson 300BO bullet seater $55
[Linked Image from photos.imageevent.com]




feel free to PM me with any questions



.
Update .... the following items are - SOLD pending funds



.300 Whisper rifle with all brass
Chop saw
custom jig
bullets



these items are still FS

1 - Sheridan Engineering 300 BO ammo gauge New In Box, never used paid $63 , selling price $50
1- BNIB , never used Wilson 300BO bullet seater $55


ad will be updated and/or closed once all items sold
.





Update 2.0 - ALL items above are still FS

that includes the rifle with brass, bullets, saw, jig, and other listed accessories


.
price drop ... $799 for the rifle and brass


Sierra bullets have been sold

all other items still FS ...
Bump
bump
Bump
another price drop ... $775 for the rifle and brass
SPF - will edit/change ad to SOLD once deal completed
© 24hourcampfire