FS: Win 70 6-06 - 10/06/08
FS: Win 70 push feed action built into a 6-06. "ADL style" with blind mag. Barrel is SS Pac-Nor in a Ruger #1 contour with flutes. Blued action, SS barrel 26" long. Stock painted green / black. Weaver bases / rings. Burris FFII 4.5-14x40 scope with Ballistic Plex reticle. Screamer of a long range gun, but I don't have a place to use the horsepower. Less than 150 rounds fired.
Chambered by a local smith who does a lot of PD shooting and loves the various 6's. If it's like the rest of his rifles I've seen / owned it will definitely be a shooter. Trigger job done - crips and right around 3 pounds pull weight.
Includes RCBS 6mm-06 dies / shell holder as well so you're all set to go. Have formed 25-06 brass to throw in plus some 75 V-max, 80 BT, and 95 BT (all partial boxes).
Have about $1200 invested - looking for $775 plus shipping from my FFL to yours for the scope, rifle, brass, bullets, and dies.
Rifle shoots 75 V-max well and 80 BT even better (best group 0.182" for 3 at 100 yds). Just loaded some 95 BT's but haven't shot yet.
Some basic measurements (approximate):
- .600" at muzzle
- .890" at front of scope bell
- 1.2" shank diameter
- approx 2" of shank exposed
Pics attached.
PM or reply with offers or questions, please.
Chambered by a local smith who does a lot of PD shooting and loves the various 6's. If it's like the rest of his rifles I've seen / owned it will definitely be a shooter. Trigger job done - crips and right around 3 pounds pull weight.
Includes RCBS 6mm-06 dies / shell holder as well so you're all set to go. Have formed 25-06 brass to throw in plus some 75 V-max, 80 BT, and 95 BT (all partial boxes).
Have about $1200 invested - looking for $775 plus shipping from my FFL to yours for the scope, rifle, brass, bullets, and dies.
Rifle shoots 75 V-max well and 80 BT even better (best group 0.182" for 3 at 100 yds). Just loaded some 95 BT's but haven't shot yet.
Some basic measurements (approximate):
- .600" at muzzle
- .890" at front of scope bell
- 1.2" shank diameter
- approx 2" of shank exposed
Pics attached.
PM or reply with offers or questions, please.