Every body is looking for something but we dont take the time to list for it for whatever reason. Wells here's your chance to hijack my post and have some fun and maybe some of us will finally get what we scour the listings for everyday...if you want something, stick it here and maybe some of us will get lucky over time...just pm the guy posting before you list it once the light bulb goes off in your head and all will be on the up and up ! I want :
8x32 nikon se binoculars
582 remington
6.5 bdl 700 Remington

The next guy wants ??????

smith model 29 blue or SS

the ball is rolling.....

Savage 110 LA LH synthetic stock with provision for a hinged floor plate or detachable magazine.

A cheap stock for a pre 64 Winchester Model 70.

A pristine condition, no lock S&W 629 Classic, with 5" full lug barrel for $300.

Rem 700 Mtn LSS in 280, NIB or 96% or better, for $300.

Ruger #1A in .250 Savage, stainless & walnut, for Christmas, for $600.

Kimber Montana in .257 Roberts & .223.

Here's what I want;
Sako 85 SS in 338 Federal or Kimber 84 in same.
What I'm willing to trade;
Sako Finnbear Hunter AV in 6.5X55

32 rimfire ammo. Stuff is hard to find!

REASONABLY priced

Remington 541-S
Remington 700 Ti .270 Win.

I want a ruger#1 22 hornet for $500.00

25-06 dies
30-06 brass once fired or new only..

I need a barrel for an old Ithaca Model 37 20ga. As long as it will fit the gun and it is not damaged, I don't care what length or choke etc. I'm going to shorten the barrel for home defense.

22cal pistol for a carry gun let me know

A clean used Leupold spotting scope. PM me!

nosler to make a 120 gn accubond in .284

I want a stainless BDL Rem 700 in either 243 or 6mm. I've had the 243 and it got stolen...!! Haven't seen one since. Were made around 1994..??

The 6mm was made in a BDL with detachable magazine... I've seen a couple, but didn't have the trade fodder or funds when they came by...

I want both...!!! Someone make my day..!

Great idea for a thread..

Same here

marlow243..pm your way

I want a remington 1100 28ga sporting clays model for my daughter.

lets start a petition

Not an "I want" for me, but I'd like to find a M700 long action detachable setup to convert a standard BDL/CDL hinged floorplate to a detachable mag. Haven't started looking yet, so don't know what the options are.

JCM

50 more years with my wife.....








But for now a Savage Mk II BV 22LR

I'm still looking for some 25-284 dies.

And some Barnes .257 75gr XLC's would be nice.

30 less years with my wife...not really, she may read this... (not)

I want A factory hard case for my Beretta 96

plab

Can Rick set up a Wife-block feature? Might be kinda handy, sure don't want her seeing all the "I'll take it!" posts

I want one of these....



....one of the best bows available.

A McSwirly in a Remington ADL SA with 60% olive, 20% tan, and 20%black would be a great find. Today is the 17th anniversary with my beautiful wife and and want many more.

Nelson

I was gonna say, Peace on Earth Goodwill towards Men, until I saw those, er, that bow.

[quote=300WinMag]I want one of these....



....one of the best bows available. [/quote

Another good reason for the wife-block option

700 L/A RH BDL Ti stock in gray w/black web
700 L/A RH BDL McM swirly - 50/50 black gray
Redfield Jr Dovetail base w/peep for 700 L/A RH
2 or 3 Leupold VX-III or VX-3, 3.5x10x40, matte, duplex

I'm sure there's more. May have to make another post.

Stock from a Remington 700VS, S/A, RH
LVSF rifle or barreled action (open to caliber)

My wifes gettin a new bow for Christmas!!!!

.280 AI, 24" barrel, 6.5-7.0 lbs without scope.

Come on Kimber 84L.

i want a shooter in a 7mm-08
henry

6.8 contender barrel 10 to 14 inch
for about $110.00

Two of em.....

A nice take down case for my Bill Hanus Birdgun, AYA 20ga.

I'm needing about four or five sets of Burris Signature (plastic insert type) rings, medium height, preferably matte, and preferably to fit Weaver type bases rather than the Redfield style.

Somebody needs to buy her a nipple guard. She's risking precious assets

I have never understood the facination with mammary glands.

I need a Douglas Barrel in .338 caliber to fit a mauser action.

I'll put my hands over them to protect her!
LMAO!!

I know I'm not going to get it.... But I'd like a woman I could stand to live with.... (Or a woman that loves me as my much as my dog does... )

But for now I'd settle for a set of .35 Newton dies. I'd sure like to hunt with my Newton...

Grasshopper

A Smith and Wesson 14 with Target Trigger and Hammer in 6" or 8 3/8" or similar set up for plinking with wadcutters.

Impossible, ain't never gonna happen.

That's why I love dogs so much... it's always 100% happy-to-see-you, unconditional love, with no moodiness.

And my wife knows the pecking order here too.....

I want my wife to be able to walk normal again without pain. Hopefully after the next couple of surgeries that will happen.

until then, I'll take a nice short bbl'ed revolver in 41mag that doesnt have a lock.

Looking for some Winchester 243 55 grain ballistic silvertips. Prefer several boxes if ya got them.

Also some Winchester 25-06 85 grain ballistic silvertips..


And as for man's infactuation with boobs, just can't be helped! Guess it goes back to us being babies....

I am impressed!!!!! I hope Santa finds her!!!!

I want a Remington 722 in 243 for my son.

They're for the children!

Bruce

Savage Mark II GLY OR Rem Roller No.4

basically, a 22 for a little southpaw.

17 Hornet (K- or Ackley) Contender carbine barrel.

Bruce

Raised on a dairy???

Holy crap did you guys see that bench.

I want a 21 year old nymphomaniac (good looking of course) for a threesome hookup with me and the wife. But since there isn't a chance in hell the wife would go for it, I'd settle for a nice Model 12 in a 20 gauge - for about $200. bucks. I know...keep on dreamin'.

I want to strength to stop looking at that picture.

Sounds like you could use some cake and cock........

I want my best friend who died two weeks ago to come back...but since that ain't ever gonna happen,

I want a S&W 4" 629-2E or later...

I want my student loans paid off.

Failing that, I'll take a Sedgley Sporter in 30-06 with a 120 minute Lyman 48 in gently used condition, all original.

Or, failing that, I'd be happy with a Winchester push-feed 458 Win Mag.

I want a synthetic Browning A bolt II long action stock - cheap would be good too.

I want all the republicans in Hell to have a cool drink of water,,and all the democraps to not get any...

"Peace on earth, goodwill toward mankind!"

MERRY CHRISTMAS TO ALL ON THE FIRE. Hope Santa fills your stockings with the things you posted. GW

Coupla VX-III 3.5-10x40 Leupolds....might have to post a WTB.

3x9 or something similar Leupold vxII, silver for a good price.

joe

I want a Kimber longmaster vt or provarmint 22-250
and I already got those and I like my wife
and I think she likes me
at she did last night

There's a bench in the picture?

More like a shelf

I'd like to chat with someone about a set of Swarovski 15x56 binos with tripod mount for around $1300.

Barring that chat, I'd like for all our troops, where ever they may be, to know we care about them and to stay safe!

Matt

A Sako barrel in .264 for an 85 action.SS would be the tata's

MORE PICTURES !!! .... of the bow gal of course


plab

After 10 solid years of searching, I've concluded there ain't one available, anywhere in the world. Spent a WHOLE lot of time and money searching too..:((((

Actually it's called a rack...& a fine one at that...I think I want some milk...& a straw.

Someone posted a BDL stainless synthetic 6mm here a while back. NIB, and expensive IIRC. Believe it was in the neighborhood of $1000. I'd like to have one too, but not for that price.

I could use a standard Redding or RCBS full length size die for 223.

Cant believe I dont have one.

I would like to find some parts to finish up my Remington rolling block projects.A number 5 block, hammer,extractor would be great. also barrels, actions, sights, stocks,you know the works.

I'd like to work a trade for a Colt SAA in 45 Colt, 6" or shorter barrel. It has to be a shooter, no collector pieces, unturned etc. any generation. I have a camo Benelli SBE with all the chokes, shims and factory hard case to trade.

variety of 25-06 ammo.........

Peace and the return of the troops overseas

I would like the girl to teach me..... to shoot.....bow and arrow that is, and I would love to find a Browning 1885 Highwall, custom barreled with a 7 STW barrel, had one and sold it...DUH me

I want Tikka to make a 270 in laminate/stainless - in left-hand - and some time to enjoy what I have.

I would like a press to reload 3 1/2 " 12 ga shotgun shells so I can work up my own coyote rounds.

Leupold 3.5-10x40 matte finish VariXIII or VX3

I already have the most wonderful wife in the world (and thank God regularly for her) two great children and a dog that really likes me. With the important stuff out of the way I would like to find the following two guns at a fair but affordable price (oxymoran):

A light weight 6.5X55 preferably with a tang safety
A 4" S&W .44 magnum

i have about everything i want how about a government by the people, and for the people.

Winchester Model 64 Deluxe in 32 spl.

I want HER!!!!!!!!!

Seriously, an AR style rifle in .257 A.I.

I need a serviceable buttstock for a Sears Model 66 semi-auto shotgun (made by Hi-Standard) to replace the one I broke.

Elimination of all who profess to kill Americans just for the Hell of it. I don't think Allah really aproves anyway. And a 2 hole butt plate for my Krag.

Wayne

A divorce attorney that works free

THEN I can buy the toys I want. Funny how that kind of [bleep] falls in your lap when you're saving cash for legal fees

oh I could use the same thing Dan!

but for right now, a nice 260 remington is what I'm after, or a short action savage in a 243 or similar chambering I can build into the 260 of my dreams.

Well I'll play along too! I'd like a decen looking sporterized small ring Mauser to put one of my new .257 1:14 twist barrels on for a .250-3000 project. Would like it to be reasonable as well or I'll just go get a Savage action to play with.

Older blued (not matte black) Rem 700 SA action or whole gun in .243, , 260, 7-08 or .308. Have a like new VX 3 3.5-10x40 matte to trade.

A NULA muzzleloader and a NULA rimfire... Right hand please

I need a good quality reasonable priced spotting scope. at least 45 power at top end preferred. PM me if you have one

I want a front trigger guard screw, for a marlin model 60.

Remington Mountain Rifle in 7x57 from the mid to late 80's.

A Sako Mannlicher in 6.5x55

I would like to make some friends in the west that would let this NE Yankee tag along on their deer and elk hunts.

ebay # 110468985515,
Not mine but I have one and love it!
Pete

I want the voices to go away....or I would settle for a Thompson Center 58 cal "BIG BOAR" flintlock muzzleloader...

I want lots of single rounds to fill up my ammunition collection. I have a long way to go (Just started a few months ago casually), but since I am 21, I have a long time to do it.

Oh, And some 45ACP bullets and 32-20WCF dies.

Well!! How about a 385 bull elk come running into my first cow call and slide to a stop at about 12yds and I put an arrow behind his shoulder for a 30yd recovery. Or

6.5 rem mag dies
168 gr 30 cal berger VLD

I'd like Don Stith to finish my Muzzleloader he was to deliver 4 Years Ago...
AK

hope this doesn't die out

ttt

#1
I want our men and women fighting for our country to come home safely.

#2
Someone to sell me a NULA in 270 Winchester for $1200.00

ok, ok I also want a 7x12 trailer for my fishhouse, or the right hardware to build the trailer into it so it drops onto the ice

I need a cheap commercial AR-15 Collapsible Stock Buffer Tube

I'll know when I see it.

A good hunting lease close to home..

700 classic 7mm rem mag.

I have a good woman I've been married to for 45 years.

S&W 610 with 6" barrel NIB
SAKO A7 Stainless 25/06 NIB
COOPER Model 52 270 NIB
Ruger Blackhawk hunter 44 Mag 7.5" barrel NIB
Brno or CZ in 375 H&H or 416 Rigby NIB

A Husqvarna Bolt action in 270 Win.
Failing that I want a clean and complete Persian or Argentine Mauser action.

Nevermind...ask and ye shall receive.

I want you all to have a happy and healthy holiday season.

I want someone to trade me some .223 Rem dies for some .308 Win dies I have.

Please send me a PM.

If someone has a 10 inch Contender in 7-30 Waters....

A Tenpoint StealthX2 crossbow.

I don't need any guns....

powder or primers.....

I'd like a three day weekend..

Friday the 18th off would be nice....

I am a pkg car driver for UPS......

You already married a gal younger than you, trying to have a heart attack

A 30" mulie......

Joseph

A marlin 39 TDS and without the raped part.

Not my normal MO, but I just couldn't resist...

A left handed Savage action, barrelled action, or complete rifle if cheap enough to build something for my son. Prefer stainless and short action but would consider anything out there as long as the crank is on the wrong side.

I'll take 50 more years with somebody ELSE'S wife......

348 model 71

Now that's funny!

Nice!! I want 2

Anything Left Handed or single shot in 25 wssm !
Thanks!

Possume Hollow Kwick Trim for 223 and power adapter

It works! How cool is that?!?

I got a PM, and have a set on the way. (Do ya think $60 plus shipping was too much...? ;)). Nope, I thought the price offered was right in line, and leaning towards the fairer side of that.

Still need a few more, but it's a start!

Ya gotta love this place!

A NIB Remington Compact Tactical 20" barrel in 308 Winchester for less than $1000.

A D-tec 243wssm with the shilen compensated barrel. Whole gun or complete upper. And one of those things above me shooting the bow.

older remington 700 22-250 bdl with the pressed checkering in 98% condition...maybe even a 222,308,or 264 from same era ?
still no luck on finding the 700 6.5, 582 or SE 8x32's yet either !

I want a custom built Remington 700 ti light weight in 7mm-08.

A double rifle in 9.3x74R that has been hunted for years and is a long way from pristine but still functions. One with wood that has been chewed on by some critter so that when I take it out into serious weather in the mountains I won't feel feel like I'm destroying the Mona Lisa. There must be someone out there who understands what a double rifle is for and is willing to part with an old friend for a reasonable amount of money so that the object of their affection can be out in the hills hunting again instead of sitting in some stupid safe.
If you have a piece of art, hang it in a museum. If you have a rifle let it hunt.
That's what I want!!!!!

A used Leupold vx iii 3.5x10 40mm in matte with a duplex reticle.

A Remington 222 any model but good shooter. I would also like a 6MM reasonably priced.

Remington R-15 and an armalite ar-30.

A stock for my L579 Sako Hvy barrel action.

[quote=338rcm][quote=22WRF]I have never understood the facination with mammary glands.


Obvious to me 338rcm was a bottle baby! GW

a fore arm for my lc smith 10 guage shotgun

Looking for a Redding #5 Powder Trickler, and a RCBS Powder Measure Stand.

I want my daughter to stop getting speeding tickets & wrecks.

A fl set of .308 Forester/Redding dies.

This works! I've been needing a used high quality spotter for several months. Surprise, surprise shortly after posting I had two excellent offers and I now have what I needed at a very fair price.

ned

I'm wanting a handful of the original M700 safety levers that came on the early production M700's--the ones with the "flat tab" style knob instead of the rounded knob.......(you know, the "dangerous" ones.....)

Anybody have some tucked in a drawer?



Casey

The cakes all gone Steelie! Honestly, I've heard that phrase before every meal I ever had when I was in the Guard. It's great it's still going on. 757

If my wife is looking at this, a real nice tree stand and a set of Carbon Express arrows.



If the "Wife Blocker" is on...... a week in Cabo with whomever I choose

Forearm and barrels for a 16/20 Fox sterlingworth. GW

I would like to find an old inoperable rifle/shotgun to use as a fire-poker at my camp. Must be inexpensive, and preferably able to be shipped to an individual.

I want a Left Handed Winchester Model 70 stainless in 270 or 30-06

some 60 grain hollow points in .257 caliber. Outta production and they were great in my Marlin model 62 in 256 Win Mag.

I want the 4 inch S&W Model 629, 44 Mag I sold at a gunshow 20 years ago for $400 back. Had to sell it to make a truck payment when the baby girl was born. I ended up hating that truck.

NEED!
An HVA High Power in 7x57 and 6.5x55 among other things

A spanner wrench to allow disassembly of a 1907 Winchester.

Yes I know the big breasted blonde who likes to hunt might be easier...

Next Friday's Wall Street Journal.

Also a Sunshade for a Zeiss Conquest 4.5-14.

HM

New bump for the new year. New years eve was a Blue Moon night.

Thats a good one..........

I would like a Psychiatrist, Bail money and a Lawyer or just one politician. He should be able to out crook all three of them.

adding another to the list..
a clean 20ga semi auto at a good price...not sure what i want,
1100 ? Urika ? or ??
nothing too heavy ...pm me if you might have something

I'd like a good price on a hunting rifle in .308. or 30.06
BDL
X-bolt
TC-Icon

A blued Pro-Hunter barrel in 358 win.

And an easy trade of my kimber montana 270 wsm for a montana in 308 win, or maybe 338 federal.

Kifaru parastove

Need ruger 1" medium rings, blued for m77 mark II

Good quality 8x42 binocular, nothing chinese

A quality 1911 in 40 S&W or 45 ACP at a reasonable price

8x32 SE or 8x30 FMTR-SX .......

Remington 700 Left Hand in 7mm Rem Mag, 30-06 or 300 Win Mag.
Need for hunting, not collecting. Ovis_Chaser

Anschutz 54 Sporter 22lr

ruger stainless long action for a build

I need a clip for my savage 19 NRA .22.

They (Mammary glands) have the power to nurture the world!!!!

Ultra light, whizbangum, magnum, that shoots quarter inch groups, off hand, that has the recoil of a .22, but hits like a .416.

Stocks for a savage 99 eg in .308. pre-mill. I don't ask for much!

Try again :
20 ga. semi in a lightweight...urika, 1100 ?
8x32 SE bino
Long action lefty in a 700 bdl
smith revolver in a .22.. 3 0r 4"...317 ?

The odd chance someone would want to trade a CZ527 Varmint Kevelar stock for a brand new cz527 varmint Laminate stock? What the heck- you never know?

Remington 700 SS 280 Mountain Rifle made in 1993. Thats not asking for too much is it??? hunter718

A TC encore SS 30.06 pro hunter barrel for a 7mm08 barrel

Would love to have an honest politician as my representative in congress, or at least one who does what he says he will do.

I lieu of that, I would like a Rem 700 LA for a build.

For the love of all that is holy somebody PM me with a Remmy .223. A bare action will work guys.

Ok. Nobody has offered up a SS 280 mountain rifle so how about a SS 25-06 Mtn. rifle made in 1993????

SS Thompson center pro hunter frame wanted.

found the 1100 and the bino !!
still looking for a bdl lefty in a 700 and a 3"-4" S&W .22 revolver, preferably the 317

Looking for a Remington Model 582.

I would love a Remington 700 Left Handed Short Action and someone to take A Leupy VX-II 3x9x50 as partial trade. I'm just sayin.....

Matte medium height Redfield 30mm Standard rings for a JR base

Ruger 77/22
.22 LR Heavy barrel
.920 plain or fluted
Whatever I can find at a decent price.

7x57 brass!

a stock for a mossberg 500 12g. Prefer non-thumbhole laminate, but an overmoulded style like Hogue or ATI would be fine.

leather cheekpiece that you tie onto the stock to raise the comb to scope level. Removeable.

a pair of leupold Yosemite Binocs for my kid.

a small locking knife similar to the buck omni drop point.

also like someone to install choke tubes on my mossberg.

Used .22 automatic pistol.

stumpy

A Tenpoint StealthX2 crossbow

- Remington 700 short action (6 digit serial #) action or complete rifle.

- Rem 722 in .222

- Mcmillan GP (general purpose hunting) woodland camo stock for short action 700, 722, or 40X.

- Kifaru Tailgunner I or Scout in Multicam

- Randall # 1 leather handle knife

- Aimpoint Micro T1

- Browning BAR light wt. .243 (stalker stock or poor wood stock)

- Hi X Swarovski scope

what the hell...

looking for small bore Fox shotguns...

I would really like a 6 in nickle Python with box and papers.

and a second chance at the 4 in nickle Diamond back that I walked away from at the Flint MI Gander Mountian on Dec 30th 2009 than woke up on Dec 31st and started driving down to pick up call found out it was gone.

Oh did i say it was prestine (no box or papers)

Oh did I say they wanted 650 for it?????

I am an idiot!!!!!!!!!!!!!!!!! sometimes I wish I could kick my own azz .

Sorry for the rant

2.5-8x leupold matte
597 .22 mag w/laminated stock
decent .22 hornet rifle..euro ?
voere shikar, kleinguenther, titan II, in 25-06
700 bdl 22-250 older pressed checkering pattern
700 bdl ss 6mm

Remington model 7 S/S Action

A good deal on some 168 308 and
140 7mm TTSX bullets

Remington 700 BDL-SS in 6MM

Remington #1 sporter rolling blocks, 44-77 or 44-90's Not the military junk.
Also Hepburns in any condition.

I would like a Remington LVSF 243. PM me

Good deal on some 6mm varmint bullets

BSA Martini International MKII
Winchester or Browning reissue Model 52
Remington 721 .300 H& H

Nice old Redfield varmint scope, Denver made.

A good price on a good old trimmer. Doesn't have to look good. It just has to work good.

#1 New...uh...er stock for an M38 (similar to a LR M98) that is currently at Shaw getting the bolt sporterized and a barrel cut.

#2 Savage/Stevens SA Std BF for a project

#3
3000 National Guard Troops
3000 New Border Patrol Agents
and the dang fence

In no particular order.

Turbo Action!
Thanks!
Pete

WELL , a winning powerball ticket would take care of all the others.

but.

1. Someone to buy the xp-100R package I have in classifieds. Money is going to exwife(not a joke) and mother of my son, who has cancer and under chemotheorpy, for the most part anyway.

2. A way to price my 1965 700 BDL Rem custom shop, hand checkered fleur de lis, SUPER high gloss, six digit serial AND in the then new, 22-250.........for same reason as Number 1. All I know is I cant find squat on pricing one. Same barrel stampings as the 40x target guns of that time. AS you can imagine I'm not excited about even thinking of parting with it.

3. A way to keep enough out of the above to pick up a decent Smith M 29 for deer season and maybe a set of 6.5x284 dies of higher quality that I can afford.

4. That no one here or anywhere else would have to endure the anquish of cancer and the ongoing treatments. Pure H on my 20 yr old son.

God Bless.

I'd like to find a factory Remington 700 short action, BDL style, laminated varmint stock. Well used is OK, but no issues or major alterations.

thx.

a S&W model 25-5 or 25-7
a small amount of 7mm-08 brass
a box for my S&W 28-3 6"
a cleaning rod and screw driver for my S&W 17-4 6"

Okay, I might as well join in.
1) Marlin 1894 Octagon 44 Mag from 1973.
2) An S&W model 66 w/3" barrel.
3) 30mm offset scope rings for a Ruger #1.
4) Marlin 39M pre-cross bolt safety.
5) Marlin 1894 in 218 bee.
6) A chance to buy back my Colt 380 Government for the 200 bucks I sold it for. What a dope!
7) While I'm dreaming, I'd like to draw a moose tag in Maine this year.
Thanks; Mike

1.Kleinguenther K-22 in 22mag.
2.Mauser 201 in 22mag.

What's with these lists? I only want one gun - a Sako Mannlicher in 6.5x55 mint - and I don't know why someone hasn't coughed it up yet.

How about a mint Marlin 336A deluxe in 35Rem.??????

597 .22 magnum grey lamanited stock in 95%+
8mm-.338 cal compact rifle in the 18-20" barrel range
clean, german, tradewind or voere rifles
700 VS Composite in .308 (anyone EVER see the supposed long action varitety's ?)
someone local to take a buch of guns/optics in trade towards a polaris 4x4 !!