Up for sale is my 1 year old 6BR. It's built on a Pierce single shot action with a polished, fluted bolt. Barrel is a Krieger Heavy Varmint gain-twist barrel. The final twist is 1:8.3".
Smithed by Mark Pharr at Tumbleweeds Custom Rifles barrel finishes at 28". No turn neck. Jewell trigger (no safety).
Stock is a McMillan HBR with a polished buttplate installed by Tom Merideth at TM Stockworks with a Tumbleweeds Custom Rifles triggerguard. Scope is a Sightron SIII 8-32x56 in TPS rings on top of the Pierce picatinny rail. I'll include a Redding Competition seater and S-type die as well as brass (approximately 50 rounds 2x fired and 50 loaded with 105gr Amaxes). Pictures are before I had the buttplate installed. $3000 shipped for everything. Will separate scope/rings from rifle if somebody wants it that way.
3 shot group at 200
5 shot group at 300
Smithed by Mark Pharr at Tumbleweeds Custom Rifles barrel finishes at 28". No turn neck. Jewell trigger (no safety).
Stock is a McMillan HBR with a polished buttplate installed by Tom Merideth at TM Stockworks with a Tumbleweeds Custom Rifles triggerguard. Scope is a Sightron SIII 8-32x56 in TPS rings on top of the Pierce picatinny rail. I'll include a Redding Competition seater and S-type die as well as brass (approximately 50 rounds 2x fired and 50 loaded with 105gr Amaxes). Pictures are before I had the buttplate installed. $3000 shipped for everything. Will separate scope/rings from rifle if somebody wants it that way.
3 shot group at 200
5 shot group at 300