Custom 338 Lapua for sale - 04/20/12
The guns is:
Built by Robert Snyder of Iowa
Lawton Action (Dillon, Mt)
McMillan A5 stock with saddle cheek piece and 13.5" LOP
Badger bottom metal with 2 mags
Badger FTE muzzlebreak
Krieger MTU contour Barrel, 27 inches from receiver to the end of the break, 1-10 twist with 160 rounds of 300 SMK down the tube.
THe gun shoots great, I have only shot it out to 500 yards on a local farm and was very happy.
Gun weighs 14.5 lbs (very little recoil)
Also comes with:
30 mm rings & base
87 loaded rounds
50 .338 250 gr HPBT bullets
18 .338 300 gr HPBT bullets
RCBS die set
12 empty once fired cases
bipod
No scope
looking for $3300 for everything, shipping included.
Trades I would consider:
6.5-284
280 AI
Nighthawk 1911
anything else all i can do is say no thanks.
Thanks for looking,
Jonathan
Built by Robert Snyder of Iowa
Lawton Action (Dillon, Mt)
McMillan A5 stock with saddle cheek piece and 13.5" LOP
Badger bottom metal with 2 mags
Badger FTE muzzlebreak
Krieger MTU contour Barrel, 27 inches from receiver to the end of the break, 1-10 twist with 160 rounds of 300 SMK down the tube.
THe gun shoots great, I have only shot it out to 500 yards on a local farm and was very happy.
Gun weighs 14.5 lbs (very little recoil)
Also comes with:
30 mm rings & base
87 loaded rounds
50 .338 250 gr HPBT bullets
18 .338 300 gr HPBT bullets
RCBS die set
12 empty once fired cases
bipod
No scope
looking for $3300 for everything, shipping included.
Trades I would consider:
6.5-284
280 AI
Nighthawk 1911
anything else all i can do is say no thanks.
Thanks for looking,
Jonathan