"C" series are some of the best IMO. Bolt works slick and smooth, trigger can be worked up real nice. These are my favorite for builds. I'd snag it up bro..
I did and you were right. Trigger needed to be lightened up a bit but it is damn near perfect now. When I pulled the barreled action out of the stock it looked like it had never been taken out. Original laquer looking stuff on the trigger adjustment screws but it came off pretty easily. I really like the rifle but it needs some bedding work. These round bottom receivers will rock back and forth when you cycle the bolt and this one does ever so slightly. A little devcon 10110 will cure that. The bolt face looks new and the bore is still pristine. Looks like a great rifle. We'll see how she shoots next weekend. Spent the whole afternoon rounding up a die set, bullets, no luck finding powder (but I have plenty of that anyway), new brass and I asked the gunshop owner if they could throw in a bag of once fired brass they had in the back (70 pieces) with the purchase of the rifle and they did. This thing will probably be a great shooter once I get it bedded. Thanks for the help guys!!