I'm going to run this like the Soup Nazi - so if you can't follow directions, NO bolt handle for you!

If you want one post what model (84 or 8400), quantity, and what version handle in this thread. Do NOT send a PM for your order, if you do I will delete it. It's much easier to keep track of everything here in one place.

I will collect payment when they are done, so don't ask me about it now.

I'll let this go a couple weeks to get a count, then order material. Should have them done in April.

Prices are shipped:
Standard $50
Tactical $55
Ascent $65

Model 84L, quantity 1, Ascent

thanks!

I'd like one.....but I don't want a hole in the end

Model 84, quantity 2(two) Tactical please.

2 for the 84, ascent style. Are the 84m and 84l the same?

Model 84L, quantity 1, Ascent

yes

Model 84m, quantity 1, ascent style

Model 84. Quantity 1, ascent style

Model 84M
Style Tactical
Quantity 2

I'm sure this has been asked, but how much weight is being saved over the standard 84m bolt handle?

What are the weights of the stock, 84ti ascent, and 84 tac?

Put me down for 1 tactical 8400. Thank you very much!

84M, one Ti Tac please. Solid, no hole, if that is an option.

Model: TI 8400 (with hole)
Quantity: One

Thank you!

One 84 Ti Ascent
One 8400 Ti Ascent

Thanks

Model 84 2 Ea - Ti Tac
Model 84 2 Ea - Ti Ascent

Model 84M, quantity 1, TI Ascent style

The end goal...

I'll take:

1 84M
1 8400 Ascent

broomd ---- thanks!

84 Tac




8400 factory & TI




Have not made any ascent handles yet so I don't have a weight.

Model 84 rifle
Quantity 3ea
Ti Tac style

Thanks

Please put me down for one (1) tactical bolt handle.

Per or exchange, I'm in for an ascent style for an 84l.

I'm in for one (1) ascent style for an 84L

Not to be a dick, but you guys are not going to get anything if you don't give me all the info.

Please put me down for one (1) tactical bolt handle for 84M.

anyone else?

I'm sure you could flip a few others here or there if you need a few more buyers.

Chris put me down for one more (1) ascent style for an 84M

Model 84M, quantity 2 (two) Tactical please.
Model 84L, quantity 1 (one) Tactical please.
Thank you

1x 84 Tactical

I will take one for 84M TI

Chris, please put me down for:
Model 84M, Quantity 1, Ascent Style
Model 84L, Quantity 1, Ascent Style

Please:
Model 8400
Ascent Style
(1)handle

Model 84M, Quantity 1, Ascent (edit: I am assuming the Ascent is the lightest bolt handle?)

Model 84M, Quanity 1, Ti Tac 84

Disregard last post--Revised order

84M, Qaunity 2, Ti Tac 84 (polished)
84M, Quanity 1, Ti Tac 84 (Bead Blasted)
Thanks

Just a progress update

They look great Chris!

If I'm not too late...

(2) Ti tac 84
(1) Ti tac 8400... Factory 8400 fine if you aren't making tactical 8400 handles.

I would like 1 tactical bolt for an 84M

I should have enough extra material.

Chris,

If not too late put me down for;

One 84M Ascent bolt

One 84L Ascent Bolt

Jerry

One 84M Ascent Bolt

Chris:

If not too late, please put me down for (1) Model 84M standard bolt knob in Titanium.

Thank you,

Jordan

One 84m Ascent please.

How are these coming along?

Have them all turned, waiting to get in the machine to do the end holes & then fluting for the Ascent models

If I can get on this I will take one Ti Tac M84.

Those that ordered an 84 Tac handle should have gotten a PM. Let me know if I missed you, but I think I got everyone. If you ordered a Tac & another style I'm going to wait & ship them all together.

Have to polish & bead blast & they will be ready to ship.

If you haven't run out of Ti, I'll take a 84 M ascent style. Thanks.

If you are still producing. Model: 84M Quantity: (2) two Style: Ascent

Interested in one 84M handle if any are still available. Tac would be first preference, but I would gladly buy the regular also.

Another update/teaser.










Price Increase
Anyone requests that request/orders an Ascent handle after this post will be paying $75 ea.

You early guys got a deal. These are a PIA to remove all the sharp edges. Gonna be spending the next week deburring, & will start contacting people late in the week to start sending payments.

I'll gladly pay you the $75. Hate to see anyone lose money. They look awesome by the way.

Nice looks super light!

So are we an ounce and a half under factory?

Ohhhh.... looking forward to getting mine.

Not quite an ounce. Factory was 1.4oz, these are .48oz

Chris,
Those teaser photos of the ascent handle look great. I've got one of your regular 84L Ti-handles from the first round but I would also take one (1) of the ascent versions for the 84L, if you still have material left over. Let me know.
Ron

Appreciate the reply.

I'll take an Ascent Handle.

Check will go out in the morning! Thanks Chris.

Received 84 ti ascent & tactical handles yesterday. They look great, looking forward to putting one on Montana 338 federal.

Chris, thanks for making these!

Is that the Ascent weights?

Got my Ascent and thanks again Chris

Haven't been contacted, are they all shipping out as of yet?

No hurry, but don't want to be left out...


ps: That quote was from the first page here

I would like to find an aluminum trigger guard...

Yes

Shipped a few mostly to guys that also ordered another style also, had to wait a week for some more deburring wheels & wanted to make sure they were going to work before having guys start sending payments.

Everyone that posted they wanted a handle should have gotten a PM with payment instructions, let me know if you didn't.

Model: 84M
Quantity: 1 (one)
Style: Ascent TI Bolt

David Nelson from AK please PM with your board handle.

If anyone has sent payment & not received a PM from me stating that I got it please let me know.

Model: 84M
Quantity: 1
Style: Ascent

All others that I have received payment from were shipped on Friday & Saturday.

You making trigger guards next:)

Kevin Weaver makes aluminum trigger guards, I just got one a few months ago. http://www.weaverrifles.com

Mine showed up today, looks great. Thanks

Mine showed up yesterday as well. Top notch craftsmanship. Thanks.

I'll take an ascent for my 84l.

I'd pm chris84 to see if there are any still available....no one has posted on the thread in two months.

I think he may be on vacation.

I just got back from a fishing trip to Montana and put my Ascent style knob on my rifle. Fit and finish are perfect, and the knob itself is way more ergonomic. Its great work.

They look great! Most unfortunately I'm a Remington guy. I was hoping you made them for Remington 700s also.

Thanks!

I'd like to buy 2 84M Ascent style knobs. Let me know if you still have them available.

I'm too skeert to PM you. LOL.

ETA: Sent you a PM to call your attention to this thread since there's several interested.

One 8400 Ascent please.

I would like an 84 ascent model also!

If they're still available or you're planning another run of them I will take (1)84L Ascent style

I'm in for a tactical

Following

I'm out of Ascent handles, but plan to make more soon. I'll start anther thread probably next week.

I have several tactical handles for the 84 models if anyone wants one of those.

Since you are starting a new thread anyway.......Will any style, Ascent or whatever work with the 84M as long as 84M is specified?

Thanks Chris!

Anybody got pic of an 84 with the tac installed?

Chris I know you are busy but any idea when you will have the Ascent Tac bolt? I am still interested in one.

Yes, there's only two different thread sizes - it's either for the 84 (L or M, doesn't matter) or 8400




There are a couple pics on the first post of this thread.



I haven't forgot about this. Like usual we got really busy this month, but I'm hoping to get them done next month.

Chris,

I'm new here but would like a tactical for an 8400.

No problem and thank you Chris.

I just ordered my 84m Montana, and would love an ascent handle on the next batch. I'll keep watch for ghee new thread, thanks Chris

I have 3 of these bolt handles.

Nearly exactly a 1/3 the weight of a stock one.

Stock:


Chris84s TI Ascent bolt handle:


If I get anymore Kimbers I will be sure to get one.

I have not been able to remove my original one yet. How did you all get it off without scratching it up? Heat, soak it with WD-40, ??

a patch of inner tube rubber and a pipe wrench....

Thanks. Turns out elk hide works well too. Ran into an issue though, the Ti handle will not screw all the way to be flush. I'll have to dig out a threading kit and see if I can get an additional third of a turn of threads on it.

Model for Montana Stainless
Style Accent
Quantity 1

84m
Ascent style
Qty 1
Please put me on your list

84 M/L Ascent style QTY 2
8400 Ascent Style QTY 1

Thanks Greg 907-539-1317 if needed

Just so I don't lose out.....

84M Ascent style - Qty of 2

Per my PM to you a few weeks ago I'll take an ascent also. Thanks

Mountain Ascent for an 8400 please.

CLOSED

See new thread here