I have 2 sets of 870 wood, this is just the wood, one set has a recoil pad but no screw.

Set A, Express wood, has some black stuff on the grip, I was going to strip and refinish these but have gone another way. 25 FTF in Rockford





Set B, I just refinished these, I give them a hand rubbed oil finish till all pores are filled then a satin poly top coat. These are like, and may be, police wood. Real nice color and grain. No pad, my plan was to cut them back and add a pad for a LOP of 14.25. 85 FTF in Rockford







Im happy to ship on your dime

Well, if you're not a member over there you are denied access to the post.

Kent

Yep...I tried to buy the wood, but the link won't let me in...

Oh well. Saves me money.

Sorry boys, I'll fix that

Morning tap

They look good,,,,What did you use to refinish them..

Tru Oil, takes about 10 or 12 coats for a full fill. Then a spray satin poly top coat. I have been doing stocks like this for years, makes for a nice durable finish.

Set B is SPF

I will take set B per our pm.

Are these off of a 20 or 12? If A is for a 20 gauge I'll take it

Sorry, 12 bore.

Passport,

Would you consider donating the "A" stock to a youth shooter?? I have a new Boy Scout (8th grader) shooting scholastic trap who is too short for the 12 1/2 inch stock I have....Ethan is a small kid.

I'll cut the stock to 11 inches and refit the recoil pad to the Remington 20 gauge I have loaned him. The 870 is the older 12 gauge frame 20 gauge so the stock will fit.

Thanks

Greg