Home
Posted By: VinceM VinceM EDC's - 10/25/14
Good afternoon Campfire members.
I have here a small batch of my " EDC " knives ready. These have a factory blade of 440C ss,1/8" thick,deep hollow ground & satin finish. Ground thin,sharp and these hold an edge well. Compact small knife ,you could drop one in your pocket but they have belt loops on the sheaths for right side. All knives have 2-3/4" of cutting sedge & are about 6.25" OAL but I will post individual pictures and exact OAL's because a couple I needed to squeeze some premium handle material scales on, that were just a touch shorter. Each knife has two 3/32" nickel pins,I peened these before finishing out. The entire spine of the knife has a " slack belt " finish. All knives here are $75. ea. includes sheath & shipping in the States
If you want more than one take $5. off ,per knife after the first ( combine shipping)
Paypal fee's are included & I take a U.S.P.S. M.O.

Top to bottom in this picture :

Stag
Ironwood ( on hold)
vintage rosewood
stabilized fancy maple >>sold
figured cocobolo >>sold
[Linked Image]

[Linked Image]

In the sheaths

[Linked Image]

[Linked Image]


The next posts will have pictures of each knife Thanks
Posted By: VinceM Re: VinceM EDC's - 10/25/14
India Sambar stag OAL is 6"

[Linked Image]

[Linked Image]

[Linked Image]


[Linked Image]


[Linked Image]


Posted By: VinceM Re: VinceM EDC's - 10/25/14
Copper colored ironwood.OAL is 6.25". This is on hold for member 257 , his buddy has a fillet here with matching wood so I want to let him see it first , as he said he might want an EDC. I'll update

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]
Posted By: VinceM Re: VinceM EDC's - 10/25/14
vintage rosewood. 6.25" OAL this is the old time stuff

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]


[Linked Image]
Posted By: VinceM Re: VinceM EDC's - 10/25/14
Fancy maple,stabilized 6-1/8" OAL >>sold

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]
Posted By: VinceM Re: VinceM EDC's - 10/25/14
full figured cocobolo 6.25" OAL >>sold

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]
Posted By: byc Re: VinceM EDC's - 10/25/14
These are awesome little knives. I have one with me all the time.

Would also make great Christmas gifts!!

Good luck with your sale Vince!!
Posted By: VinceM Re: VinceM EDC's - 10/25/14
Originally Posted by byc
These are awesome little knives. I have one with me all the time.

Would also make great Christmas gifts!!

Good luck with your sale Vince!!


Thanks Hoop smile
Posted By: VinceM Re: VinceM EDC's - 10/25/14
Btt
Posted By: VinceM Re: VinceM EDC's - 10/25/14
Maple is sold
Posted By: Sbrown Re: VinceM EDC's - 10/25/14
PM sent

Steve
Posted By: VinceM Re: VinceM EDC's - 10/25/14
Originally Posted by Sbrown
PM sent

Steve


Steve PM replied Thank You
Posted By: VinceM Re: VinceM EDC's - 10/26/14
Cocobolo and maple sold
Ironwood on hold
Stag and rosewood are available

Thank you
Posted By: 257_X_50 Re: VinceM EDC's - 10/26/14
I'll take the ironwood. If not taken.
Posted By: VinceM Re: VinceM EDC's - 10/26/14
Originally Posted by 257_X_50
I'll take the ironwood. If not taken.


OK thank you

Stag and rosewood are available
Thank you
Posted By: Doc12 Re: VinceM EDC's - 10/26/14
I'll take the rosewood if still available.
Posted By: VinceM Re: VinceM EDC's - 10/26/14
Originally Posted by Doc12
I'll take the rosewood if still available.


You got it Doc thank you

Only the stag remains available thanks
Posted By: geedubya Re: VinceM EDC's - 10/26/14
BTT for a great deal on a fine little EDC.

I have one in stag and cocobolo........


https://www.24hourcampfire.com/ubbth...s/9281982/Where_do_you_carry#Post9281982

Best,

GWB


Posted By: VinceM Re: VinceM EDC's - 10/26/14
Originally Posted by geedubya
BTT for a great deal on a fine little EDC.

I have one in stag and cocobolo........


https://www.24hourcampfire.com/ubbth...s/9281982/Where_do_you_carry#Post9281982

Best,

GWB





Looking good GW Thanks !

Stag is in need of a home BTT
Posted By: VinceM Re: VinceM EDC's - 10/26/14
Who's gonna take this last stag ?
Posted By: VinceM Re: VinceM EDC's - 10/27/14
^^^
Posted By: owen_n_wa Re: VinceM EDC's - 10/27/14
i will take the stag.
Posted By: VinceM Re: VinceM EDC's - 10/27/14
Originally Posted by owen_n_wa
i will take the stag.


Thank You Owen,I sent you a PM.

Looks like these are all sold Thank You All,-Vince
© 24hourcampfire