Blueprint:

Yugo 48 Intermediate Mauser action
S&K Sculpted Bases/Rings (plated to match rifle)
Dakota 3- position "M70-style" safety
Custom knob
Swedish Mauser bottom metal; trigger guard contoured
Timney Sportsman trigger; shoe plated to match rifle
#3 CM Shilen 1-in-10" twist tube trimmed to 21"
Boyd's Classic Nutmeg laminate (grip drilled for cap; barrel channel free-floated)
Mahovsky's Metalife Plating

**Scope not included**












Contouring of the Swede BM unit:



Laser engraved cartridge designation:



[img]http://i480.photobucket.com/albums/rr166/efrrwake99/Yugo%20Bob/image_zps29b6a591.jpg[/img]

[img]http://i480.photobucket.com/albums/rr166/efrrwake99/Yugo%20Bob/image_zpsf55cc15e.jpg[/img]

$850 shipped

First "I'll take it" wins; it is available on other boards.

Please don't hesitate to PM w/ questions. No trades, thanks.

what is the weight

Don't have a scale to weigh precisely, but over 9 lbs probably close to 10.

$825 shipped to your FFL who accepts rifles from individuals

Some more questions:

Length of pull

round count

groups you are getting and with what ammo

Thanks.

Here is how she sits today (silver 3-9x 40mm VX-2 w/ LRD, NOT INCLUDED):





$800

$775

What is the action and magazine length?

Taken from the Boyds web site:

Center to center of action screws = 7-5/8s" (small ring length ideal for 257 Rob, & 7x57)

Front receiver ring diameter = 1-3/8" (large ring size)

Overall length of Floorplate = 8-5/16"

Just to be clear here the mag length is sufficient for seating 25 cal bullets pretty long, however it's a brand new barrel/chamber with a relatively short throat so "kiss" was about where base of 100 NBT is even with shoulder/neck juncture or just below.

IMHO a perfect set-up for a lifetime of steel, chuck, yote, and buck cappin.

Please PM me reasonable offers.

$750

This gun is a shooter and EFW is good to go.

Thanks John; sent it up to gunbroker:

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=477128308

if anything, i will make sure you get close to what you were looking for......good luck, lenny aka super accurate

This is such a nice looking mauser. I wish I wasn't off work for 6 months recovering from shoulder surgery. This would have already been mine. Good luck with your sale.