Sako AV and Douglas 26" barrel graphite black ceracoate/Mcmillan stock olive drab ceracoate...1/2" clovers w/factory 100's..Burris 4-16x Sig. Select w/ BDC...pretty much perfect, 99%....$1850 for package..pushing 3400 fps at the muzzle gives you about 1500 # of energy at 300yds with 2 " of drop w/a 2.5" high 100 yd zero...pretty darn flat !
Any interest i will email a few pic's w/a pm'ed email address , thanks
pm sent, would love to see pics
i dont know the twist, just know it liked the 100 spitzers and didnt break open the box of partitions or 87 grainers as it didnt need to be more accurate then that for long range coyotes..
Probably a 10 twist unless builder went custom. Would be real sweet if it was an 8 twist. That would work perfectly with 105 gr. Scenars. 10 twist won't quite do the job with those, but works great with 100 gr. Partitions.
With a tight fitting cleaning rod, put a pinch of masking tape on the rod, ends pointing up. Pull the rod until the tape points up again and measure the distance traveled for one complete revolution.
DF
decided to split up and keep the scope if that draws any interest...
believe the builder was actually douglas...marked g.r. douglas and if i understand it correctly, only marked as such if they do the smithing..correct me if i am wrong anyone as i am not the one who commissioned it..
one last try, you wont miss what you dont check on must be the thinking , ??
Well, off the board again (3 months later) ..