For sale is my Nosler Model 48 Trophy Grade Rifle in 7mm-08 cal.
This is just a great all around rifle, very accurate with both factory loads (Federal Fusion, Nosler Trophy Grade 140 AB, Barnes TTSX 120gr), and the one handload I developed for it with a 120 gr Barnes TTSX and Win 760. The rifle will shoot all of these loads well under an inch consistently.
It is not a super lightweight rifle, more of a mid-weight weighing an advertised 6lb 8 oz bare rifle. I bought the rifle used but unfired and have hunted it a couple of times. I would estimate it has less than 200 rounds through it total.
It’s a beautiful rifle with its tungsten gray Ceracote finish and matching black and tungsten spiderweb stock. The only reason I would consider selling it is that the B & C stock just doesn’t fit me very well, and I went back to my Kimber MT in the same cal.
They only imperfections are a slight rub mark on the top of the barrel (not through the Ceracote and almost impossible to photograph, probably from sitting in the former owners safe) and a very small nick on the bottom of the alum trigger guard. I bought the rifle with both imperfections, and happily did not add any more.
The rifle was advertised at $1,795, when they first came out, and then reduced down to $1,450 a couple of years later as a short term holiday time sale with quite a bit of wait time to get one, which is why I bought this one like new in box.
*** I’m asking $1,200.00 shipped for it (payment via USPS money order please). Comes with Tally lightweight low rings and original box.*Does not include scope*
First I’ll take it per time stamp on the post or via PM gets it!
Rifle specs below. Please let me know if you have any questions.
Model 48 Trophy Grade Rifle (TGR) Specs Original MSRP $1,795
> Factory installed B & C Stock with full length aluminum bedding block, bedded at factory, blind magazine (no floorplate), right side cheek piece, comfortable palm swell grip
> 24” Pac-Nor Cro-Mo barrel, hand honed, target crown, light contour
> Duel locking lug proprietary action featuring larger AR-15/Sako style extractor and plunger ejector
> Action and barrel trued at factory
> Rifle Basix trigger installed at factory, set a 3lbs
> Entire barreled action factory Cerakoted in Tungsten Gray, with matching Tungsten Gray spider webbing on black stock
> Firing pin, spring and bolt internals factory coated in Microslick finish
> Two position safety
Thanks,
Craig
This is just a great all around rifle, very accurate with both factory loads (Federal Fusion, Nosler Trophy Grade 140 AB, Barnes TTSX 120gr), and the one handload I developed for it with a 120 gr Barnes TTSX and Win 760. The rifle will shoot all of these loads well under an inch consistently.
It is not a super lightweight rifle, more of a mid-weight weighing an advertised 6lb 8 oz bare rifle. I bought the rifle used but unfired and have hunted it a couple of times. I would estimate it has less than 200 rounds through it total.
It’s a beautiful rifle with its tungsten gray Ceracote finish and matching black and tungsten spiderweb stock. The only reason I would consider selling it is that the B & C stock just doesn’t fit me very well, and I went back to my Kimber MT in the same cal.
They only imperfections are a slight rub mark on the top of the barrel (not through the Ceracote and almost impossible to photograph, probably from sitting in the former owners safe) and a very small nick on the bottom of the alum trigger guard. I bought the rifle with both imperfections, and happily did not add any more.
The rifle was advertised at $1,795, when they first came out, and then reduced down to $1,450 a couple of years later as a short term holiday time sale with quite a bit of wait time to get one, which is why I bought this one like new in box.
*** I’m asking $1,200.00 shipped for it (payment via USPS money order please). Comes with Tally lightweight low rings and original box.*Does not include scope*
First I’ll take it per time stamp on the post or via PM gets it!
Rifle specs below. Please let me know if you have any questions.
Model 48 Trophy Grade Rifle (TGR) Specs Original MSRP $1,795
> Factory installed B & C Stock with full length aluminum bedding block, bedded at factory, blind magazine (no floorplate), right side cheek piece, comfortable palm swell grip
> 24” Pac-Nor Cro-Mo barrel, hand honed, target crown, light contour
> Duel locking lug proprietary action featuring larger AR-15/Sako style extractor and plunger ejector
> Action and barrel trued at factory
> Rifle Basix trigger installed at factory, set a 3lbs
> Entire barreled action factory Cerakoted in Tungsten Gray, with matching Tungsten Gray spider webbing on black stock
> Firing pin, spring and bolt internals factory coated in Microslick finish
> Two position safety
Thanks,
Craig
