Home
Posted By: glazer1972 Rem 700 ADL SS .308 in MCM Edge - 09/15/16
Remington 700 ADL SS .308 24" Sporter Profile in MCMillan Edge in green 1" pad, Talley Lightweight Low (if you want them) Walker Trigger or if you'd prefer I can put an XMark back in. The front of the action was bedded when I got it. $1000 shipped in the lower 48. glazer1972 at yahoo dot com.
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 09/16/16
Btt
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 09/17/16
Weight is with Weaver K6 6x38 not included.

[Linked Image]IMG_0698 by [email=https://www.flickr.com/photos/129655136@N02/][/email], on Flickr

[Linked Image]IMG_0697 by [/url], on Flickr

[url=https://flic.kr/p/M9WdnG][Linked Image]IMG_0699 by [email=https://www.flickr.com/photos/129655136@N02/][/email], on Flickr
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 09/19/16
BTT
Posted By: EdwardG Re: Rem 700 ADL SS .308 in MCM Edge - 09/19/16
how does it shoot
Posted By: Dude270 Re: Rem 700 ADL SS .308 in MCM Edge - 09/20/16
I'd be interested in the stock if you decide to part it out

Thanks
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 09/20/16
Factory Installed Pillars.
13.5" LOP.
Trigger at 2#s.

EdwardG, I bought it used and I only shot about a box through it to get it sighted in. I thought it shot pretty good but didn't really take the time to get the best out of it. Also considering it was only sighted in with a 6x.

Dude 270, I'll keep that it mind.
Posted By: toby2 Re: Rem 700 ADL SS .308 in MCM Edge - 09/21/16
Up for a nice rig
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 09/24/16
Btt
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 09/27/16
Btt
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 09/30/16
Btt.
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 10/01/16
Reduced to $950
Posted By: glazer1972 Re: Rem 700 ADL SS .308 in MCM Edge - 10/03/16
Sold
© 24hourcampfire