Home


It has a fluted bolt and a special ordered 25" SST fluted barrel, instead of the factory 23" blued barrel. Rifle is still unfired other than factory shot card which shows it to be a proven shooter

Buyer pays actual shipping cost....$1950

[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]

Nice rifle, I've not see any Cooper factory target that good. H380 in a 280 AI?
What part of Alabama are you in?
Originally Posted by 6MMWASP
Nice rifle, I've not see any Cooper factory target that good. H380 in a 280 AI?
I don't reload yet so I assume that's a strange powder??

Originally Posted by RatherBHuntin
What part of Alabama are you in?
I am in Huntsville
Is the stock Classic style or does it have a cheek weld?
Originally Posted by Reloder28
Is the stock Classic style or does it have a cheek weld?
here's a pic of other side. Thought I had both in the original post

[Linked Image]
Super deal here and no wait. If I did not have 2 already, I would get this one.

Mine shoots 58gr of IMR 4831 with a 140 Nosler Accubond Fed 210 Match Primer
3150fps
Bump for a great rifle and seller. Deal with confidence gentlemen. Have known and hunted with LUMPY for years and he is as honest and good as they come! I would give anything if I could afford the rifle myself. That factory shot card makes me weak in the knees at what it might do at the hands of a competent reloader!
Originally Posted by LUMPY15
Originally Posted by 6MMWASP
Nice rifle, I've not see any Cooper factory target that good. H380 in a 280 AI?
I don't reload yet so I assume that's a strange powder??

Lumpy I just would have never thought of using H380 in a 280 but Hodgedon shows very good velocity with light bullets. Heck of a rifle!

Originally Posted by RatherBHuntin
What part of Alabama are you in?
I am in Huntsville
What is the rifle weight as pictured?
Somebody please buy this before I end up with 3!
Originally Posted by CrankEmUp
Somebody please buy this before I end up with 3!
No need to wait around and let it get away from you pal.. grin
Bump
PM sent.
Originally Posted by dkhnt
PM sent.
Replied
Somebody needs to buy this! LUMPY15 is gay, but he still owns some FINE rifles though!
Gotta know 100 yd target? Just too good! Also mfg of sst barrels? Thanks
^ Cooper test group results are at 40 yds with a 36x scope, however MOST Coopers will shoot darn close to the test target group @ 100 yds and beyond.Current Cooper barrels are made by Wilson.

One thing for sure...THEY SHOOT. Bump for a really nice rifle.
Thanks Ghostman.....
Thanks for the headsup on my questions.
Originally Posted by Reloder28
What is the rifle weight as pictured?


Same question......
What's does it weigh ? And what twist rate ?
7.5# and either 1/8 or 1/9 twist...I honestly can't remember....It's their standard twist
TTT
TTT - $1900 plus shipping
Bump
Originally Posted by 6MMWASP
Nice rifle, I've not see any Cooper factory target that good. H380 in a 280 AI?
H380 was my go-to powder for light (350 grains) loads in my 460 Wby. It's versatile.

Very nice rifle. If my house sells..............
Sold via another site
© 24hourcampfire