Annie 54 Bench Rest stock - 11/12/16
Stith BR stock for Anschutz 54. Nicely done but a little dinged up. My friend massaged it pretty good in the grip area to make a nice pistol grip and also in the cheek so he could get his head down on the scope without touching the gun. The butt plate was done with a piece of buffalo horn, which it turns out is not very durable. Has a bunch of little dings out of it. He also had some sort of tuner that a mill cut was made for in the fore end along with a few holes drilled to adjust it. Not sure what the name of it was, but it had a piece of delrin that you could move up and down and back and forth.
Mark Cheseboro did the pillars/escutcheons and turned down the action screws which are included. Acraglass bedded with the Annie recoil lug in place. Remington ADL trigger guard. $250 shipped. MO only.
[img]http://i789.photobucket.com/albums/...F-4C27-B14A-A1095DDDF82E_zps0vey66rz.jpg [/img]
Mark Cheseboro did the pillars/escutcheons and turned down the action screws which are included. Acraglass bedded with the Annie recoil lug in place. Remington ADL trigger guard. $250 shipped. MO only.
[img]http://i789.photobucket.com/albums/...