Home
Posted By: OK6MM Custom Remington 223AI - 01/22/18
Custom Rem 223 AI, G prefix action
24” Schneider, M40 barrel, 1-8 twist with 1/2-28 threads
Bedded HS Precision with Karsten cheek and Rem bdl bottom metal
Rem X Mark trigger
Badger style bolt knob
Black cerakote or durakote
Bipod, suppressor and scope base are not included

$1350 shipped

Trades:

Vortex Gen II PST Mil/Mil
CF tripod setup


Attached picture 223 AI (1).jpg
Posted By: Brazos Re: Custom Remington 223AI - 01/22/18
[Linked Image]
Posted By: OK6MM Re: Custom Remington 223AI - 01/23/18
Originally Posted by Brazos
[Linked Image]


Thanks
Seller is Good to Go, for sure....even if he is an OU fan!

Go Pokes!!!
Posted By: OK6MM Re: Custom Remington 223AI - 01/23/18
Originally Posted by Huckleberry75
Seller is Good to Go, for sure....even if he is an OU fan!

Go Pokes!!!


🙄
Posted By: kingston Re: Custom Remington 223AI - 01/23/18
Round count?
Posted By: OK6MM Re: Custom Remington 223AI - 01/23/18
Originally Posted by kingston
Round count?


I have only put a box through it but I do not know the count count as I took this in on trade.
Posted By: OK6MM Re: Custom Remington 223AI - 01/29/18
Bump

Took this out over the weekend and put the smack down on a few prairie dogs with boxed 73 grn match ammo. It performed very well.
Posted By: OK6MM Re: Custom Remington 223AI - 01/30/18
Now including scope base and Redding 3- piece die set.
Posted By: JTPinTX Re: Custom Remington 223AI - 01/30/18
Which die set exactly, and would you sell the die set separate from the rifle?
Posted By: OK6MM Re: Custom Remington 223AI - 01/31/18
Originally Posted by JTPinTX
Which die set exactly, and would you sell the die set separate from the rifle?


Redding 84907 and I might be interested in selling separately. Shoot me a PM.
Posted By: JTPinTX Re: Custom Remington 223AI - 01/31/18
I was actually looking for the bushing dies. Thank you for the consideration though, I appreciate it.
Posted By: OK6MM Re: Custom Remington 223AI - 01/31/18
Originally Posted by JTPinTX
I was actually looking for the bushing dies. Thank you for the consideration though, I appreciate it.


That’s what I’ll be replacing these with.
Posted By: OK6MM Re: Custom Remington 223AI - 02/03/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 02/06/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 02/12/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 02/15/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 02/18/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 02/20/18
Round count is approximately 1200
Posted By: OK6MM Re: Custom Remington 223AI - 02/23/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 02/26/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 03/05/18
Bump
Posted By: OK6MM Re: Custom Remington 223AI - 03/06/18
SOLD
© 24hourcampfire